Hi, On Wed, 2018-12-05 at 09:56 +0100, Mathias Kresin wrote: > Hey all, > I would like to start to reject patches for adding boards with only 32 MByte > of RAM and 4 > MByte of flash [0]. These boards barely work with todays OpenWrt default > builds and > require quite some modifications to be useful at all [1]. > IMHO it doesn't make much sense to waste resources (reviewer time, build > resources) for > boards which will most likely never see an official build and/or are more or > less > unusable with the official build. > I prefer to have a joint statement which I can link to, to prevent endless > discussions or > accusations of acting purely arbitrary. > I'm not sure whether the topic qualifies for a formal voting, hence the RFC. > Mathias > [0] https://github.com/openwrt/openwrt/pull/1577 > [1] https://openwrt.org/supported_devices/432_warning > The point about these boards requiring a lot of modification to be useful is simply not true.I have a TP-Link tl-wr841n-v11 running the master branch with kernel 4.14 with luci and sqm-scripts + miniupnpd with no problem at all. The only change I had to do was disable IPv6 and the opkg package from the build imageresulting in the final image size of 3.8M For reference I have attached .config that I use. > _______________________________________________openwrt-devel mailing > listopenwrt-de...@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel -- Regards, Shaleen Jain
CONFIG_TARGET_ar71xx=y CONFIG_TARGET_ar71xx_tiny=y CONFIG_TARGET_ar71xx_tiny_DEVICE_tl-wr841-v11=y CONFIG_DEVEL=y CONFIG_BUILD_PATENTED=y CONFIG_CCACHE=y CONFIG_CLEAN_IPKG=y CONFIG_IMAGEOPT=y # CONFIG_IPV6 is not set CONFIG_KERNEL_COREDUMP=y CONFIG_KERNEL_DEBUG_INFO=y CONFIG_KERNEL_DEBUG_KERNEL=y CONFIG_KERNEL_ELF_CORE=y # CONFIG_KERNEL_IPV6 is not set CONFIG_KERNEL_SWAP=y CONFIG_LUCI_SRCDIET=y CONFIG_PACKAGE_iptables-mod-conntrack-extra=y CONFIG_PACKAGE_iptables-mod-ipopt=y CONFIG_PACKAGE_kmod-fs-exfat=m CONFIG_PACKAGE_kmod-ifb=y CONFIG_PACKAGE_kmod-ipt-conntrack-extra=y CONFIG_PACKAGE_kmod-ipt-ipopt=y CONFIG_PACKAGE_kmod-ipt-raw=y CONFIG_PACKAGE_kmod-nls-base=m CONFIG_PACKAGE_kmod-sched-cake=y CONFIG_PACKAGE_kmod-sched-core=y CONFIG_PACKAGE_libiwinfo-lua=y CONFIG_PACKAGE_liblua=y CONFIG_PACKAGE_liblucihttp=y CONFIG_PACKAGE_liblucihttp-lua=y CONFIG_PACKAGE_librt=y CONFIG_PACKAGE_libubus-lua=y CONFIG_PACKAGE_libuuid=y CONFIG_PACKAGE_lua=y CONFIG_PACKAGE_luci=y CONFIG_PACKAGE_luci-app-firewall=y CONFIG_PACKAGE_luci-app-sqm=y CONFIG_PACKAGE_luci-app-upnp=y CONFIG_PACKAGE_luci-base=y CONFIG_PACKAGE_luci-lib-ip=y CONFIG_PACKAGE_luci-lib-jsonc=y CONFIG_PACKAGE_luci-lib-nixio=y CONFIG_PACKAGE_luci-mod-admin-full=y CONFIG_PACKAGE_luci-proto-ppp=y CONFIG_PACKAGE_luci-theme-bootstrap=y CONFIG_PACKAGE_miniupnpd=y # CONFIG_PACKAGE_odhcpd-ipv6only is not set # CONFIG_PACKAGE_opkg is not set CONFIG_PACKAGE_rpcd=y CONFIG_PACKAGE_rpcd-mod-rrdns=y CONFIG_PACKAGE_sqm-scripts=y CONFIG_PACKAGE_tc=y CONFIG_PACKAGE_uhttpd=y CONFIG_STRIP_KERNEL_EXPORTS=y CONFIG_TARGET_SQUASHFS_BLOCK_SIZE=256 CONFIG_USE_MKLIBS=y CONFIG_PACKAGE_kmod-nf-ipt6=y CONFIG_PACKAGE_libip6tc=y
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
