Hi, I'm currently playing with USB gadget stuff. The goal is to run an Ethernet link and a console over the USB link. I already selected the relevant kernel modules and ACM device and RNDIS device is created on the USB host system - all fine so far. The ACM device on the USB gadget side is created as /dev/ttyGS0, and when I use "echo foobar > /dev/ttyGS0" or "cat /dev/ttyGS0" on USB device side with corresponding counterparts on USB host side, then it already works like a charme. My problem is the inittab: I think the right approach is to add an entry to inittab when I want to provide a login console on this tty, so I added: ttyGS0::askfirst:/usr/libexec/login.sh at the end of my inittab. However, during boot ttyGS0 is not yet available - it takes until the USB gadget is setup. procd skips this line at boot time.
So my question is: is this the correct approach, or should I use a hotplug script to start such a console? Regards, mhei _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
