Joe Ayers <j...@ayerscasa.com> [2018-11-19 19:40:34]: Thank you for testing.
> 1) Physical ports not functional. frames are TX out, but RX not > received back. Switch configured out-of-box OK. Ok, at least some progress. > 2) wlan0 is functional and works correctly. However, default for > wifi-device is option disabled = '1', so not live on firstboot. That's expected and standard OpenWrt behavior. > [ 0.444718] libphy: Fixed MDIO Bus: probed > [ 0.786402] libphy: ag71xx_mdio: probed > [ 0.793193] switch0: Atheros AR8236 rev. 1 switch registered on mdio-bus.0 > [ 1.137115] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:04 > [uid=004dd043, driver=Atheros AR8216/AR8236/AR8316] > [ 1.148755] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII Please can you provide also output of `swconfig dev switch0 show` from the same ath79 broken image? Can you please provide the same outputs (dmesg lines, swconfig) from firmware which is working for you? It's firmware image from 18.06 release, am I correct? Can you please try to run latest image[1] from development snapshot and check if that works for you? Thanks! 1. https://downloads.openwrt.org/snapshots/targets/ar71xx/generic/openwrt-ar71xx-generic-ubnt-nano-m-xw-squashfs-factory.bin -- ynezz _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
