Hi all,
I'm trying to get a dlink dir-825-c1 working with a device tree setup.
So far it can boot, the partitions are correctly set up, the Ethernet
ports seem to work and the wireless devices are coming up.
I'm a bit stumped with mac addresses as well as LAN port leds, though.
In ar71xx ath79_parse_ascii_mac() is used (for this and some other
boards) to get the macs. But I don't see any equivalent in ath79. For
now I try to use target/linux/ath79/base-files/etc/board.d/02_network to
set the mac addresses like this:
dlink,dir-825-c1)
lan_mac=$(mtd_get_mac_text "mac" 4)
wan_mac=$(mtd_get_mac_text "mac" 24)
;;
But currently that doesn't work out. I must be doing something wrong.
I think it would be great if something like ath79_parse_ascii_mac()
could be added to of_net.c. I'm not a programmer, so for me that would
be tough :) Is it possible that somebody please adds this?
And the leds from the Ethernet ports are still just dark. I saw that
".open_drain" is set to "true" in the ar71xx mach file. Anybody knows
what the equivalent config is in a DTS file?
Thanks for reading!
Kind regards,
Seb
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
