From: Ben Greear <gree...@candelatech.com>
This way the radio (phy) name can be the same through module reloads.
To set the desired name:
uci set wireless.@wifi-device[0].phyname=wiphy0
I guess this only works on ipq6086 boards as I could not find a more
generic place to put this. Maybe someone can improve it.
Signed-off-by: Ben Greear <gree...@candelatech.com>
---
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git
a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 5e5dd84..0b1f6f8 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -30,3 +30,24 @@ case "$board" in
*)
;;
esac
+
+OPATH=${DEVPATH##/devices/platform/}
+OPATH=${OPATH%%/ieee*}
+
+# 10 radios is enough for anyone!
+for i in `seq 0 9`;
+ do
+ BUS=`uci get wireless.@wifi-device[$i].path`
+ if [ "$BUS " == "$OPATH " ]
+ then
+ PHYNAME=${DEVPATH##*ieee80211/}
+ NPHYNAME=`uci get wireless.@wifi-device[$i].phyname`
+ if [ "$NPHYNAME " != " " ]
+ then
+ if [ "$PHYNAME " != "$NPHYNAME " ]
+ then
+ iw $PHYNAME set name $NPHYNAME
+ fi
+ fi
+ fi
+done
--
2.4.11
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
