* SoC: QCA IPQ4019
* RAM: 512 MiB
* Flash: 32 MiB of SPI NOR and 128 MiB NAND
* Wireless: 2.4-GHz 802.11ng, and two 5-GHz 802.11ac
* IoT :
CSR8811 radio [ supports BT classic and BLE ]
SiLabs EFR32MG radio [ supports 802.15.4 ZigBee ]
Tested on IPQ ap-dk07.1-c1 Board:
1) NOR boot and NAND boot
2) Tested USB and PCIe interfaces
3) WDOG test
4) cpu frequency scaling
5) ethernet, 2G and 5G WiFi
6) ubi sysupgrade
The ap-dk07.1-c1 board is already available in upstream
linux v4.17
Signed-off-by: Ram Chandra Jangir <rjan...@codeaurora.org>
---
Changes since v2:
* Dropped rootfs conflict patch 904-Fix-rootfs-*-mount.patch,
as it can automount "rootfs" partition by setting bootargs
as 'ubi.mtd=rootfs'
* nand sysupgrade support
* Validated with both ath10k and ath10k-ct WiFi
.../etc/hotplug.d/firmware/11-ath10k-caldata | 6 +-
.../ipq40xx/base-files/lib/upgrade/platform.sh | 3 +-
target/linux/ipq40xx/image/Makefile | 12 +++
...ipq4019-Add-ipq4019-ap.dk07.1-common-data.patch | 99 ++++++++++++++++++++++
...4019-Add-qcom-ipq4019-ap.dk07.1-c1-board-.patch | 99 ++++++++++++++++++++++
...5-dts-qcom-ipq4019-ap.dk07.1-enable-nodes.patch | 99 ++++++++++++++++++++++
6 files changed, 315 insertions(+), 3 deletions(-)
create mode 100644
target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap.dk07.1-common-data.patch
create mode 100644
target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq4019-ap.dk07.1-c1-board-.patch
create mode 100644
target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-enable-nodes.patch
diff --git
a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 1d4fd9c..cfbe801 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -143,7 +143,8 @@ case "$FIRMWARE" in
;;
compex,wpj428 |\
openmesh,a42 |\
- openmesh,a62)
+ openmesh,a62 |\
+ qcom,ipq4019-ap-dk07.1-c1)
ath10kcal_extract "0:ART" 4096 12064
;;
zyxel,nbg6617 |\
@@ -179,7 +180,8 @@ case "$FIRMWARE" in
;;
compex,wpj428 |\
openmesh,a42 |\
- openmesh,a62)
+ openmesh,a62 |\
+ qcom,ipq4019-ap-dk07.1-c1)
ath10kcal_extract "0:ART" 20480 12064
;;
zyxel,nbg6617 |\
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
index 610f9bb..b6c6f92 100644
--- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
@@ -46,7 +46,8 @@ zyxel_do_upgrade() {
platform_do_upgrade() {
case "$(board_name)" in
- 8dev,jalapeno)
+ 8dev,jalapeno |\
+ qcom,ipq4019-ap-dk07.1-c1)
nand_do_upgrade "$ARGV"
;;
asus,rt-ac58u)
diff --git a/target/linux/ipq40xx/image/Makefile
b/target/linux/ipq40xx/image/Makefile
index 5cd11ca..6d58c41 100644
--- a/target/linux/ipq40xx/image/Makefile
+++ b/target/linux/ipq40xx/image/Makefile
@@ -207,6 +207,18 @@ define Device/qcom_ap-dk04.1-c1
endef
TARGET_DEVICES += qcom_ap-dk04.1-c1
+define Device/qcom_ipq4019-ap-dk07.1-c1
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_DTS := qcom-ipq4019-ap.dk07.1-c1
+ KERNEL_INSTALL := 1
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_TITLE := QCA AP-DK07.1-C1
+endef
+TARGET_DEVICES += qcom_ipq4019-ap-dk07.1-c1
+
define Device/zyxel_nbg6617
$(call Device/FitImageLzma)
DEVICE_DTS := qcom-ipq4018-nbg6617
diff --git
a/target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap.dk07.1-common-data.patch
b/target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap.dk07.1-common-data.patch
new file mode 100644
index 0000000..bcc109f
--- /dev/null
+++
b/target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap.dk07.1-common-data.patch
@@ -0,0 +1,99 @@
+From f97b2aaaf0734a3a6dd6effff6ee0aaa0a69cab5 Mon Sep 17 00:00:00 2001
+From: Sricharan R <sricha...@codeaurora.org>
+Date: Fri, 25 May 2018 11:41:17 +0530
+Subject: [PATCH] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
+
+Add the common data for all dk07 based boards.
+
+Reviewed-by: Abhishek Sahu <abs...@codeaurora.org>
+Signed-off-by: Sricharan R <sricha...@codeaurora.org>
+Signed-off-by: Andy Gross <andy.gr...@linaro.org>
+---
+ arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 75 +++++++++++++++++++++++++++
+ 1 file changed, 75 insertions(+)
+ create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+
+diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+new file mode 100644
+index 0000000..9f1a5a66
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+@@ -0,0 +1,75 @@
++// SPDX-License-Identifier: GPL-2.0
++// Copyright (c) 2018, The Linux Foundation. All rights reserved.
++
++#include "qcom-ipq4019.dtsi"
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
++
++ memory {
++ device_type = "memory";
++ reg = <0x80000000 0x20000000>; /* 512MB */
++ };
++
++ aliases {
++ serial0 = &blsp1_uart1;
++ serial1 = &blsp1_uart2;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ soc {
++ pinctrl@1000000 {
++ serial_0_pins: serial0-pinmux {
++ pins = "gpio16", "gpio17";
++ function = "blsp_uart0";
++ bias-disable;
++ };
++
++ i2c_0_pins: i2c-0-pinmux {
++ pins = "gpio20", "gpio21";
++ function = "blsp_i2c0";
++ bias-disable;
++ };
++
++ nand_pins: nand-pins {
++ pins = "gpio53", "gpio55", "gpio56",
++ "gpio57", "gpio58", "gpio59",
++ "gpio60", "gpio62", "gpio63",
++ "gpio64", "gpio65", "gpio66",
++ "gpio67", "gpio68", "gpio69";
++ function = "qpic";
++ };
++ };
++
++ serial@78af000 {
++ pinctrl-0 = <&serial_0_pins>;
++ pinctrl-names = "default";
++ status = "ok";
++ };
++
++ dma@7884000 {
++ status = "ok";
++ };
++
++ i2c@78b7000 { /* BLSP1 QUP2 */
++ pinctrl-0 = <&i2c_0_pins>;
++ pinctrl-names = "default";
++ status = "ok";
++ };
++
++ dma@7984000 {
++ status = "ok";
++ };
++
++ qpic-nand@79b0000 {
++ pinctrl-0 = <&nand_pins>;
++ pinctrl-names = "default";
++ status = "ok";
++ };
++ };
++};
+--
+1.9.1
+
diff --git
a/target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq4019-ap.dk07.1-c1-board-.patch
b/target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq4019-ap.dk07.1-c1-board-.patch
new file mode 100644
index 0000000..655a372
--- /dev/null
+++
b/target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq4019-ap.dk07.1-c1-board-.patch
@@ -0,0 +1,99 @@
+From 5ade893ec03c6612a38d53eaf4324f21e18eeef5 Mon Sep 17 00:00:00 2001
+From: Sricharan R <sricha...@codeaurora.org>
+Date: Fri, 25 May 2018 11:41:18 +0530
+Subject: [PATCH] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
+
+Reviewed-by: Abhishek Sahu <abs...@codeaurora.org>
+Signed-off-by: Sricharan R <sricha...@codeaurora.org>
+Signed-off-by: Andy Gross <andy.gr...@linaro.org>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 64 +++++++++++++++++++++++++
+ 2 files changed, 65 insertions(+)
+ create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 2c002b3..eede5df 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -708,6 +708,7 @@
+ qcom-ipq4019-ap.dk01.1-c1.dtb \
+ qcom-ipq4019-a62.dtb \
+ qcom-ipq4019-ap.dk04.1-c1.dtb \
++ qcom-ipq4019-ap.dk07.1-c1.dtb \
+ qcom-ipq4028-wpj428.dtb \
+ qcom-ipq4029-gl-b1300.dtb \
+ qcom-ipq4029-mr33.dtb \
+diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+new file mode 100644
+index 0000000..8c7ef65
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+@@ -0,0 +1,64 @@
++// SPDX-License-Identifier: GPL-2.0
++// Copyright (c) 2018, The Linux Foundation. All rights reserved.
++
++#include "qcom-ipq4019-ap.dk07.1.dtsi"
++
++/ {
++ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
++ compatible = "qcom,ipq4019-ap-dk07.1-c1";
++
++ soc {
++ pci@40000000 {
++ status = "ok";
++ perst-gpio = <&tlmm 38 0x1>;
++ };
++
++ spi@78b6000 {
++ status = "ok";
++ };
++
++ pinctrl@1000000 {
++ serial_1_pins: serial1-pinmux {
++ pins = "gpio8", "gpio9",
++ "gpio10", "gpio11";
++ function = "blsp_uart1";
++ bias-disable;
++ };
++
++ spi_0_pins: spi-0-pinmux {
++ pinmux {
++ function = "blsp_spi0";
++ pins = "gpio13", "gpio14", "gpio15";
++ bias-disable;
++ };
++ pinmux_cs {
++ function = "gpio";
++ pins = "gpio12";
++ bias-disable;
++ output-high;
++ };
++ };
++ };
++
++ serial@78b0000 {
++ pinctrl-0 = <&serial_1_pins>;
++ pinctrl-names = "default";
++ status = "ok";
++ };
++
++ spi@78b5000 {
++ pinctrl-0 = <&spi_0_pins>;
++ pinctrl-names = "default";
++ status = "ok";
++ cs-gpios = <&tlmm 12 0>;
++
++ m25p80@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ reg = <0>;
++ compatible = "n25q128a11";
++ spi-max-frequency = <24000000>;
++ };
++ };
++ };
++};
+--
+1.9.1
+
diff --git
a/target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-enable-nodes.patch
b/target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-enable-nodes.patch
new file mode 100644
index 0000000..58238c4
--- /dev/null
+++
b/target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-enable-nodes.patch
@@ -0,0 +1,99 @@
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+@@ -5,7 +5,7 @@
+
+ / {
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
+- compatible = "qcom,ipq4019-ap-dk07.1-c1";
++ compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019";
+
+ soc {
+ pci@40000000 {
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+@@ -67,9 +67,65 @@
+ };
+
+ qpic-nand@79b0000 {
++ compatible = "qcom,ipq4019-nand", "qcom,msm-nand";
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "ok";
++
++ nand@0 {
++ compatible = "qcom,nandcs";
++ reg = <0>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ nand-ecc-strength = <4>;
++ nand-ecc-step-size = <512>;
++ nand-bus-width = <8>;
++ };
++ };
++
++ mdio@90000 {
++ status = "okay";
++ };
++
++ ess-switch@c000000 {
++ status = "okay";
++ };
++
++ ess-psgmii@98000 {
++ status = "okay";
++ };
++
++ edma@c080000 {
++ status = "okay";
++ };
++
++ wifi@a000000 {
++ status = "okay";
++ };
++
++ wifi@a800000 {
++ status = "okay";
++ };
++
++ usb3_ss_phy: ssphy@9a000 {
++ status = "ok";
++ };
++
++ usb3_hs_phy: hsphy@a6000 {
++ status = "ok";
++ };
++
++ usb3: usb3@8af8800 {
++ status = "ok";
++ };
++
++ usb2_hs_phy: hsphy@a8000 {
++ status = "ok";
++ };
++
++ usb2: usb2@60f8800 {
++ status = "ok";
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -348,7 +348,7 @@
+ regulator;
+ };
+
+- serial@78af000 {
++ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+@@ -360,7 +360,7 @@
+ dma-names = "rx", "tx";
+ };
+
+- serial@78b0000 {
++ blsp1_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78b0000 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
