Buttons of AVM FritzBox 4020 are incorrectly flagged as active high.
This was an oversight as RFKill button was working as expected even
with incorrectly flagged GPIO.
Signed-off-by: David Bauer <m...@david-bauer.net>
---
target/linux/ath79/dts/qca9561_avm_fritz4020.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
b/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
index 6b30c036ea..8489c8a1e6 100644
--- a/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
+++ b/target/linux/ath79/dts/qca9561_avm_fritz4020.dts
@@ -96,13 +96,13 @@
wps_button {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
wlan_button {
label = "WLAN button";
linux,code = <KEY_RFKILL>;
- gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
};
--
2.18.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
