Add support the ar71xx supported GL.iNet GL-MIFI to ath79.
Signed-off-by: Kyson Lok <kyson...@gmail.com>
---
target/linux/ath79/base-files/etc/board.d/01_leds | 5 +
.../linux/ath79/base-files/etc/board.d/02_network | 3 +-
target/linux/ath79/dts/ar9331_glinet_mifi.dts | 139 +++++++++++++++++++++
target/linux/ath79/image/generic.mk | 9 ++
4 files changed, 155 insertions(+), 1 deletion(-)
create mode 100644 target/linux/ath79/dts/ar9331_glinet_mifi.dts
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds
b/target/linux/ath79/base-files/etc/board.d/01_leds
index db0d12c..1d3c95a 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -33,6 +33,11 @@ etactica,eg200)
ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100"
"33"
ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica"
"ignore"
;;
+glinet,mifi)
+ ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+ ucidef_set_led_netdev "3g" "3G" "$boardname:green:3g" "3g-wan"
+ ;;
netgear,wnr612-v2|\
on,n150r)
ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network
b/target/linux/ath79/base-files/etc/board.d/02_network
index 14f6c59..af42d8f 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -48,7 +48,8 @@ ath79_setup_interfaces()
;;
avm,fritz4020|\
glinet,ar150|\
- glinet,ar300m)
+ glinet,ar300m|\
+ glinet,mifi)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
iodata,etg3-r|\
diff --git a/target/linux/ath79/dts/ar9331_glinet_mifi.dts
b/target/linux/ath79/dts/ar9331_glinet_mifi.dts
new file mode 100644
index 0000000..6fe4516
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_glinet_mifi.dts
@@ -0,0 +1,139 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ compatible = "glinet,mifi", "qca,ar9331";
+ model = "GL.iNet GL-MIFI";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "mifi:green:wlan";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ label = "mifi:green:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "mifi:green:wan";
+ gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ 3g {
+ label = "mifi:green:3g";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <0>;
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ 3gcontrol {
+ gpio-export,name = "3gcontrol";
+ gpio-export,output = <1>;
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@2 {
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@3 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&art 0x0>;
+};
+
+ð1 {
+ status = "okay";
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+};
diff --git a/target/linux/ath79/image/generic.mk
b/target/linux/ath79/image/generic.mk
index e35a356..f10a552 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -80,6 +80,15 @@ define Device/glinet_ar300m_nor
endef
TARGET_DEVICES += glinet_ar300m_nor
+define Device/glinet_mifi
+ ATH_SOC := ar9331
+ DEVICE_TITLE := GL.iNet GL-MIFI
+ DEVICE_PACKAGES := kmod-usb-chipidea2
+ IMAGE_SIZE := 16000k
+ SUPPORTED_DEVICES += gl-mifi
+endef
+TARGET_DEVICES += glinet_mifi
+
define Device/iodata_etg3-r
ATH_SOC := ar9342
DEVICE_TITLE := I-O DATA ETG3-R
--
2.7.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
