Add support for the ar71xx supported Tp_link MR-3040 v2 to ath79.
Signed-off-by: Dmitry Tunin <hanipouspi...@gmail.com>
---
.../linux/ath79/base-files/etc/board.d/02_network | 1 +
.../linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts | 161 +++++++++++++++++++++
target/linux/ath79/image/tiny-tp-link.mk | 10 ++
3 files changed, 172 insertions(+)
create mode 100644 target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network
b/target/linux/ath79/base-files/etc/board.d/02_network
index 9e315ee..bfbc1ac 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -16,6 +16,7 @@ ath79_setup_interfaces()
tplink,re450-v2|\
tplink,tl-mr10u|\
tplink,tl-mr3020-v1|\
+ tplink,tl-mr3040-v2|\
tplink,tl-wr703n|\
ubnt,unifiac-lite|\
ubnt,unifiac-mesh|\
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts
b/target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts
new file mode 100644
index 0000000..d72839e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ model = "TP-Link TL-MR3040 V2";
+ compatible = "tplink,tl-mr3040-v2", "qca,ar9331";
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "tp-link:green:lan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "netdev:eth0";
+ };
+
+ led3g {
+ label = "tp-link:green:3g";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ sw1 {
+ label = "sw1";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_0>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+
+ sw2 {
+ label = "sw2";
+ linux,input-type = <EV_SW>;
+ linux,code = <BTN_1>;
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dr_mode = "host";
+ vbus-supply = <®_usb_vbus>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0x3d0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/image/tiny-tp-link.mk
b/target/linux/ath79/image/tiny-tp-link.mk
index 6aefd9e..bc1ce6d 100644
--- a/target/linux/ath79/image/tiny-tp-link.mk
+++ b/target/linux/ath79/image/tiny-tp-link.mk
@@ -21,6 +21,16 @@ define Device/tplink_tl-mr3020-v1
endef
TARGET_DEVICES += tplink_tl-mr3020-v1
+define Device/tplink_tl-mr3040-v2
+ $(Device/tplink-4mlzma)
+ ATH_SOC := ar9331
+ DEVICE_TITLE := TP-LINK TL-MR3040 v2
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea2 kmod-usb-ledtrig-usbport
+ TPLINK_HWID := 0x30400002
+ SUPPORTED_DEVICES += tl-mr3040-v2
+endef
+TARGET_DEVICES += tplink_tl-mr3040-v2
+
define Device/tplink_tl-mr3220-v1
$(Device/tplink-4m)
ATH_SOC := ar7241
--
2.7.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
