08.07.2018 11:37, Hauke Mehrtens:
The at91/legacy build in build bot is failing since some months now
because it can not create openwrt-at91-legacy-at91-q5xr5-squashfs-
factory.bin.
See http://phase1.builds.lede-project.org/builders/at91%2Flegacy
This is caused by this warning:
WARNING: Image file linux-at91_legacy/at91-q5xr5-kernel.bin is too big
When the size check is removed it is working again.
I do not have this device and do not know if we can just remove this
size check or if we should solve this problem in a different way.
Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>
---
target/linux/at91/image/legacy.mk | 1 -
1 file changed, 1 deletion(-)
diff --git a/target/linux/at91/image/legacy.mk
b/target/linux/at91/image/legacy.mk
index c6d9ed8108..2ed866dddc 100644
--- a/target/linux/at91/image/legacy.mk
+++ b/target/linux/at91/image/legacy.mk
@@ -113,7 +113,6 @@ TARGET_DEVICES += ethernut5
define Device/at91-q5xr5
$(Device/production-dtb)
DEVICE_TITLE := Exegin Q5XR5
- KERNEL_SIZE := 2048k
endef
TARGET_DEVICES += at91-q5xr5
IMHO the wrong fix for the issue. The kernel size is restricted by the
kernel partition defined in at91-q5xr5.dts[0]. Removing the variable
would create a not working image.
The following fixes for the target build error comes in mind:
- disable the build of an image for the at91-q5xr5 completely
- set the IMAGES variable to nothing for the at91-q5xr5, to prevent the
build of a sysupgrade image (not sure if it would allow to build
initramfs images without hitting the kernel size error)
- add a preloader to use a better compression (not checked if kernel is
already LZMA compressed)
Mathias
[0]
https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/at91/files/arch/arm/boot/dts/at91-q5xr5.dts;h=728553bce0bf58bdde6a14088910db5547d1c614;hb=HEAD
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
