On Mon, Jun 18, 2018 at 5:07 AM, Eneas U de Queiroz via openwrt-devel <openwrt-devel@lists.openwrt.org> wrote: > The sender domain has a DMARC Reject/Quarantine policy which disallows > sending mailing list messages using the original "From" header. > > To mitigate this problem, the original message has been wrapped > automatically by the mailing list software. >
Let's have the discussion on Github on your PR https://github.com/openwrt/openwrt/pull/1069 Thanks Alex > ---------- Forwarded message ---------- > From: Eneas U de Queiroz <cote2004-git...@yahoo.com> > To: openwrt-devel@lists.openwrt.org > Cc: Eneas U de Queiroz <cote2004-git...@yahoo.com> > Bcc: > Date: Sun, 17 Jun 2018 23:05:58 -0300 > Subject: [PATCH] wolfssl: reorganized build options > Removed options that can't be turned off because we're building > with --enable-stunnel, some of which affected hostpad's Config.in. > Adjusted the title of OCSP option, as OCSP itself can't be turned off, > only the stapling part is selectable. > Fixed poly1035 build. > Mark options turned on when wpad support is selected. > Add building with TLS v1.0 support as an option. > > Signed-off-by: Eneas U de Queiroz <cote2004-git...@yahoo.com> > > PS: Is there any reason to split up chacha and poly1305 options? > I would merge them in to a single option, but haven't done this here. > --- > package/libs/wolfssl/Config.in | 17 ++++++--------- > package/libs/wolfssl/Makefile | 33 > ++++++++---------------------- > package/network/services/hostapd/Config.in | 3 --- > 3 files changed, 15 insertions(+), 38 deletions(-) > > diff --git a/package/libs/wolfssl/Config.in b/package/libs/wolfssl/Config.in > index 50b0bb9cdf..45750a5892 100644 > --- a/package/libs/wolfssl/Config.in > +++ b/package/libs/wolfssl/Config.in > @@ -12,10 +12,6 @@ config WOLFSSL_HAS_CHACHA > bool "Include ChaCha cipher suite support" > default n > > -config WOLFSSL_HAS_ECC > - bool "Include ECC (Elliptic Curve Cryptography) support" > - default y > - > config WOLFSSL_HAS_DH > bool "Include DH (Diffie-Hellman) support" > default y > @@ -24,12 +20,8 @@ config WOLFSSL_HAS_ARC4 > bool "Include ARC4 support" > default y > > -config WOLFSSL_HAS_DES3 > - bool "Include DES3 (Tripple-DES) support" > - default y > - > -config WOLFSSL_HAS_PSK > - bool "Include PKS (Pre Share Key) support" > +config WOLFSSL_HAS_TLSV10 > + bool "Include TLS 1.0 support" > default y > > config WOLFSSL_HAS_SESSION_TICKET > @@ -41,11 +33,14 @@ config WOLFSSL_HAS_DTLS > default n > > config WOLFSSL_HAS_OCSP > - bool "Include OSCP support" > + bool "Include OSCP stapling support" > default y > > config WOLFSSL_HAS_WPAS > bool "Include wpa_supplicant support" > + select WOLFSSL_HAS_ARC4 > + select WOLFSSL_HAS_OCSP > + select WOLFSSL_HAS_SESSION_TICKET > default y > > config WOLFSSL_HAS_ECC25519 > diff --git a/package/libs/wolfssl/Makefile b/package/libs/wolfssl/Makefile > index e08b6f3929..6e121330f4 100644 > --- a/package/libs/wolfssl/Makefile > +++ b/package/libs/wolfssl/Makefile > @@ -26,11 +26,10 @@ PKG_CPE_ID:=cpe:/a:yassl:cyassl > PKG_CONFIG_DEPENDS:=\ > CONFIG_WOLFSSL_HAS_AES_CCM CONFIG_WOLFSSL_HAS_AES_GCM \ > CONFIG_WOLFSSL_HAS_ARC4 CONFIG_WOLFSSL_HAS_CHACHA \ > - CONFIG_WOLFSSL_HAS_DES3 CONFIG_WOLFSSL_HAS_DH CONFIG_WOLFSSL_HAS_DTLS > \ > - CONFIG_WOLFSSL_HAS_ECC CONFIG_WOLFSSL_HAS_ECC25519 \ > + CONFIG_WOLFSSL_HAS_DH CONFIG_WOLFSSL_HAS_DTLS \ > + CONFIG_WOLFSSL_HAS_ECC25519 CONFIG_WOLFSSL_HAS_TLSV10 \ > CONFIG_WOLFSSL_HAS_OCSP CONFIG_WOLFSSL_HAS_POLY_1305 \ > - CONFIG_WOLFSSL_HAS_PSK CONFIG_WOLFSSL_HAS_SESSION_TICKET \ > - CONFIG_WOLFSSL_HAS_WPAS > + CONFIG_WOLFSSL_HAS_SESSION_TICKET CONFIG_WOLFSSL_HAS_WPAS > > include $(INCLUDE_DIR)/package.mk > > @@ -85,15 +84,9 @@ CONFIGURE_ARGS += \ > --disable-chacha > endif > > -ifeq ($(CONFIG_WOLFSSL_HAS_ECC),y) > +ifneq ($(CONFIG_WOLFSSL_HAS_DH),y) > CONFIGURE_ARGS += \ > - --enable-ecc \ > - --enable-supportedcurves > -endif > - > -ifeq ($(CONFIG_WOLFSSL_HAS_DH),y) > -CONFIGURE_ARGS += \ > - --enable-dh > + --disable-dh > endif > > ifneq ($(CONFIG_WOLFSSL_HAS_ARC4),y) > @@ -104,17 +97,9 @@ CONFIGURE_ARGS += \ > --enable-arc4 > endif > > -ifneq ($(CONFIG_WOLFSSL_HAS_DES3),y) > -CONFIGURE_ARGS += \ > - --disable-des3 > -else > -CONFIGURE_ARGS += \ > - --enable-des3 > -endif > - > -ifeq ($(CONFIG_WOLFSSL_HAS_PSK),y) > +ifeq ($(CONFIG_WOLFSSL_HAS_TLSV10),y) > CONFIGURE_ARGS += \ > - --enable-psk > + --enable-tlsv10 > endif > > ifeq ($(CONFIG_WOLFSSL_HAS_SESSION_TICKET),y) > @@ -142,9 +127,9 @@ CONFIGURE_ARGS += \ > --enable-curve25519 > endif > > -ifneq ($(CONFIG_WOLFSSL_HAS_POLY1305),y) > +ifneq ($(CONFIG_WOLFSSL_HAS_POLY_1305),y) > CONFIGURE_ARGS += \ > - --enable-poly1305 > + --disable-poly1305 > endif > > #ifneq ($(CONFIG_TARGET_x86),) > diff --git a/package/network/services/hostapd/Config.in > b/package/network/services/hostapd/Config.in > index 222cfb7f13..23b0c9c037 100644 > --- a/package/network/services/hostapd/Config.in > +++ b/package/network/services/hostapd/Config.in > @@ -71,11 +71,8 @@ config WPA_WOLFSSL > select WOLFSSL_HAS_AES_CCM > select WOLFSSL_HAS_AES_GCM > select WOLFSSL_HAS_ARC4 > - select WOLFSSL_HAS_DES3 > select WOLFSSL_HAS_DH > - select WOLFSSL_HAS_ECC > select WOLFSSL_HAS_OCSP > - select WOLFSSL_HAS_PSK > select WOLFSSL_HAS_SESSION_TICKET > select WOLFSSL_HAS_WPAS > > -- > 2.16.4 > > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/listinfo/openwrt-devel
