For easier future kernel bumps replace spi patch with upstream version
slightly modified. The modification removes partition definitions which
has been diffrent for some U-Boot versions.
Also this removes unnecessary i2c definition which was in the old patch.

Signed-off-by: Tomasz Maciej Nowak <tome...@o2.pl>
---
 ...a-3720-espressobin-wire-up-spi-flash.patch | 45 +++++++++++++++++++
 ...sporessobin-dt-enable-spi-nor-on-i2c.patch | 29 ------------
 2 files changed, 45 insertions(+), 29 deletions(-)
 create mode 100644 
target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch
 delete mode 100644 
target/linux/mvebu/patches-4.14/521-esporessobin-dt-enable-spi-nor-on-i2c.patch

diff --git 
a/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch
 
b/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch
new file mode 100644
index 0000000000..fb80db7e89
--- /dev/null
+++ 
b/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch
@@ -0,0 +1,45 @@
+From bffed3d4abcd32ba6d492a9bd7ebe81dc92eaa9a Mon Sep 17 00:00:00 2001
+From: Ellie Reeves <ellierev...@gmail.com>
+Date: Sun, 25 Mar 2018 21:57:36 +0200
+Subject: [PATCH] arm64: dts: armada-3720-espressobin: wire up spi flash
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is the storage the machine boots from by default. The partitioning
+is taken from the U-Boot that is shipped with the board. There is some
+more space on the flash that isn't used.
+
+Tested-by: Gregory CLEMENT <gregory.clem...@bootlin.com>
+Signed-off-by: Ellie Reeves <ellierev...@gmail.com>
+Signed-off-by: Uwe Kleine-König <u.kleine-koe...@pengutronix.de>
+Signed-off-by: Gregory CLEMENT <gregory.clem...@bootlin.com>
+
+[drop partitions, not every U-Boot has same layout]
+Signed-off-by: Tomasz Maciej Nowak <tome...@o2.pl>
+---
+ .../dts/marvell/armada-3720-espressobin.dts   | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
++++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+@@ -96,6 +96,19 @@
+       status = "okay";
+ };
+ 
++&spi0 {
++      status = "okay";
++
++      flash@0 {
++              #address-cells = <1>;
++              #size-cells = <1>;
++              reg = <0>;
++              compatible = "winbond,w25q32dw", "jedec,spi-flash";
++              spi-max-frequency = <104000000>;
++              m25p,fast-read;
++      };
++};
++
+ /* Exported on the micro USB connector J5 through an FTDI */
+ &uart0 {
+       status = "okay";
diff --git 
a/target/linux/mvebu/patches-4.14/521-esporessobin-dt-enable-spi-nor-on-i2c.patch
 
b/target/linux/mvebu/patches-4.14/521-esporessobin-dt-enable-spi-nor-on-i2c.patch
deleted file mode 100644
index 3cabaa7a01..0000000000
--- 
a/target/linux/mvebu/patches-4.14/521-esporessobin-dt-enable-spi-nor-on-i2c.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -111,6 +111,26 @@
-       status = "okay";
- };
- 
-+&spi0 {
-+      status = "okay";
-+
-+      w25q32dw@0 {
-+              #address-cells = <1>;
-+              #size-cells = <1>;
-+              compatible = "jedec,spi-nor";
-+              reg = <0>;
-+              spi-max-frequency = <104000000>;
-+              m25,fast-read;
-+
-+              pinctrl-names = "default";
-+              pinctrl-0 = <&spi_quad_pins>;
-+      };
-+};
-+
-+&i2c0 {
-+      status = "okay";
-+};
-+
- &mdio {
-       switch0: switch0@1 {
-               compatible = "marvell,mv88e6085";
-- 
2.17.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/listinfo/openwrt-devel

Reply via email to