The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
> Added kernel version 4.14 to mpc85xx.
> Rebased all patches
> Added new kernel options with default values.
> Caam support is not enabled in the kernel.
>
> Signed-off-by: Achim Gottinger <ac...@ag-web.biz>
> ---
> target/linux/mpc85xx/Makefile | 2 +-
> target/linux/mpc85xx/config-4.14 | 365
> +++++++++++++++++++++ ...erpc-85xx-add-gpio-keys-to-of-match-table.patch
> | 10 + .../100-powerpc-85xx-tl-wdr4900-v1-support.patch | 80 +++++
> .../101-powerpc-85xx-hiveap-330-support.patch | 30 ++
> .../102-powerpc-add-cmdline-override.patch | 37 +++
> 6 files changed, 523 insertions(+), 1 deletion(-)
>
> diff --git a/target/linux/mpc85xx/Makefile
> b/target/linux/mpc85xx/Makefile index b181e67c0e..32987ebb50 100644
> --- a/target/linux/mpc85xx/Makefile
> +++ b/target/linux/mpc85xx/Makefile
> @@ -14,7 +14,7 @@ FEATURES:=squashfs
> MAINTAINER:=Imre Kaloz <ka...@openwrt.org>
> SUBTARGETS:=generic p1020
>
> -KERNEL_PATCHVER:=4.9
> +KERNEL_PATCHVER:=4.4
>
> KERNELNAME:=zImage
>
> diff --git a/target/linux/mpc85xx/config-4.14
> b/target/linux/mpc85xx/config-4.14 new file mode 100644
> index 0000000000..0bdf7aa25d
> --- /dev/null
> +++ b/target/linux/mpc85xx/config-4.14
> @@ -0,0 +1,365 @@
> +# CONFIG_40x is not set
> +# CONFIG_44x is not set
> +# CONFIG_ADVANCED_OPTIONS is not set
> +CONFIG_AR8216_PHY=y
> +CONFIG_AR8216_PHY_LEDS=y
> +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
> +CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
> +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
> +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
> +CONFIG_ARCH_HAS_ILOG2_U32=y
> +CONFIG_ARCH_HAS_SG_CHAIN=y
> +CONFIG_ARCH_HAS_WALK_MEMORY=y
> +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
> +CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> +CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
> +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
> +CONFIG_ARCH_MMAP_RND_BITS=11
> +# CONFIG_ARCH_RANDOM is not set
> +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
> +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> +CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
> +CONFIG_ARCH_SUPPORTS_UPROBES=y
> +CONFIG_ARCH_SUSPEND_POSSIBLE=y
> +CONFIG_ARCH_USE_BUILTIN_BSWAP=y
> +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
> +CONFIG_ASN1=y
> +CONFIG_AUDIT_ARCH=y
> +CONFIG_BLK_MQ_PCI=y
> +CONFIG_BOOKE=y
> +CONFIG_BOOKE_WDT=y
> +CONFIG_BOUNCE=y
> +# CONFIG_BSC9131_RDB is not set
> +# CONFIG_BSC9132_QDS is not set
> +# CONFIG_C293_PCIE is not set
> +CONFIG_CLONE_BACKWARDS=y
> +CONFIG_CLZ_TAB=y
> +CONFIG_CMDLINE="console=ttyS0,115200"
> +CONFIG_CMDLINE_BOOL=y
> +# CONFIG_CMDLINE_OVERRIDE is not set
> +# CONFIG_CORENET_GENERIC is not set
> +# CONFIG_CPM2 is not set
> +CONFIG_CPU_BIG_ENDIAN=y
> +CONFIG_CRYPTO_AEAD=y
> +CONFIG_CRYPTO_AEAD2=y
> +# CONFIG_CRYPTO_AES_PPC_SPE is not set
> +CONFIG_CRYPTO_AKCIPHER=y
> +CONFIG_CRYPTO_AKCIPHER2=y
> +CONFIG_CRYPTO_AUTHENC=y
> +#CONFIG_CRYPTO_DEV_FSL_CAAM=y
> +#CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
> +#CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
> +# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
> +# CONFIG_CRYPTO_DEV_FSL_CAAM_IMX is not set
> +# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set
> +#CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y
> +#CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
> +#CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
> +#CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
> +CONFIG_CRYPTO_HASH=y
> +CONFIG_CRYPTO_HASH2=y
> +CONFIG_CRYPTO_HW=y
> +CONFIG_CRYPTO_MANAGER=y
> +CONFIG_CRYPTO_MANAGER2=y
> +# CONFIG_CRYPTO_MD5_PPC is not set
> +CONFIG_CRYPTO_NULL=y
> +CONFIG_CRYPTO_NULL2=y
> +CONFIG_CRYPTO_RNG=y
> +CONFIG_CRYPTO_RNG2=y
> +CONFIG_CRYPTO_RSA=y
> +# CONFIG_CRYPTO_SHA1_PPC is not set
> +# CONFIG_CRYPTO_SHA1_PPC_SPE is not set
> +# CONFIG_CRYPTO_SHA256_PPC_SPE is not set
> +CONFIG_CRYPTO_WORKQUEUE=y
> +CONFIG_DEBUG_BUGVERBOSE=y
> +# CONFIG_DEFAULT_UIMAGE is not set
> +CONFIG_DNOTIFY=y
> +CONFIG_DTC=y
> +# CONFIG_E200 is not set
> +CONFIG_E500=y
> +CONFIG_EARLY_PRINTK=y
> +CONFIG_EDAC_ATOMIC_SCRUB=y
> +CONFIG_EDAC_SUPPORT=y
> +CONFIG_ENABLE_MUST_CHECK=y
> +# CONFIG_EPAPR_BOOT is not set
> +CONFIG_ETHERNET_PACKET_MANGLE=y
> +# CONFIG_FHCI_DEBUG is not set
> +CONFIG_FIXED_PHY=y
> +CONFIG_FSL_BOOKE=y
> +# CONFIG_FSL_DPAA is not set
> +CONFIG_FSL_EMB_PERFMON=y
> +# CONFIG_FSL_FMAN is not set
> +CONFIG_FSL_GTM=y
> +CONFIG_FSL_LBC=y
> +CONFIG_FSL_PCI=y
> +CONFIG_FSL_PQ_MDIO=y
> +CONFIG_FSL_SOC=y
> +CONFIG_FSL_SOC_BOOKE=y
> +# CONFIG_FSL_ULI1575 is not set
> +CONFIG_GENERIC_ALLOCATOR=y
> +CONFIG_GENERIC_ATOMIC64=y
> +CONFIG_GENERIC_BUG=y
> +CONFIG_GENERIC_CLOCKEVENTS=y
> +CONFIG_GENERIC_CMOS_UPDATE=y
> +CONFIG_GENERIC_CPU_AUTOPROBE=y
> +# CONFIG_GENERIC_CSUM is not set
> +CONFIG_GENERIC_IO=y
> +CONFIG_GENERIC_IRQ_SHOW=y
> +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
> +CONFIG_GENERIC_ISA_DMA=y
> +CONFIG_GENERIC_NVRAM=y
> +CONFIG_GENERIC_PCI_IOMAP=y
> +CONFIG_GENERIC_SMP_IDLE_THREAD=y
> +CONFIG_GENERIC_STRNCPY_FROM_USER=y
> +CONFIG_GENERIC_STRNLEN_USER=y
> +# CONFIG_GENERIC_TBSYNC is not set
> +CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
> +CONFIG_GEN_RTC=y
> +# CONFIG_GE_FPGA is not set
> +# CONFIG_GE_IMP3A is not set
> +CONFIG_GIANFAR=y
> +CONFIG_GPIOLIB=y
> +CONFIG_GPIO_GENERIC=y
> +CONFIG_GPIO_MPC8XXX=y
> +CONFIG_GPIO_SYSFS=y
> +CONFIG_HAS_DMA=y
> +CONFIG_HAS_IOMEM=y
> +CONFIG_HAS_IOPORT_MAP=y
> +# CONFIG_HAS_RAPIDIO is not set
> +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
> +CONFIG_HAVE_ARCH_AUDITSYSCALL=y
> +# CONFIG_HAVE_ARCH_BITREVERSE is not set
> +CONFIG_HAVE_ARCH_JUMP_LABEL=y
> +CONFIG_HAVE_ARCH_KGDB=y
> +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
> +CONFIG_HAVE_ARCH_TRACEHOOK=y
> +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
> +CONFIG_HAVE_CBPF_JIT=y
> +CONFIG_HAVE_DEBUG_KMEMLEAK=y
> +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
> +CONFIG_HAVE_DMA_API_DEBUG=y
> +CONFIG_HAVE_DYNAMIC_FTRACE=y
> +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> +CONFIG_HAVE_FUNCTION_TRACER=y
> +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
> +CONFIG_HAVE_GENERIC_RCU_GUP=y
> +CONFIG_HAVE_IDE=y
> +CONFIG_HAVE_IOREMAP_PROT=y
> +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
> +CONFIG_HAVE_MEMBLOCK=y
> +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
> +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
> +CONFIG_HAVE_NET_DSA=y
> +CONFIG_HAVE_OPROFILE=y
> +CONFIG_HAVE_PERF_EVENTS=y
> +CONFIG_HAVE_PERF_REGS=y
> +CONFIG_HAVE_PERF_USER_STACK_DUMP=y
> +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
> +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> +CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
> +# CONFIG_HIVEAP_330 is not set
> +CONFIG_HW_RANDOM=y
> +CONFIG_HZ=250
> +# CONFIG_HZ_100 is not set
> +CONFIG_HZ_250=y
> +CONFIG_HZ_PERIODIC=y
> +CONFIG_I2C=y
> +CONFIG_I2C_BOARDINFO=y
> +CONFIG_I2C_MPC=y
> +CONFIG_INITRAMFS_SOURCE=""
> +CONFIG_IOMMU_HELPER=y
> +# CONFIG_IPIC is not set
> +CONFIG_IRQCHIP=y
> +CONFIG_IRQ_DOMAIN=y
> +CONFIG_IRQ_FORCED_THREADING=y
> +CONFIG_IRQ_WORK=y
> +CONFIG_ISA_DMA_API=y
> +CONFIG_KERNEL_GZIP=y
> +CONFIG_KERNEL_START=0xc0000000
> +# CONFIG_KSI8560 is not set
> +CONFIG_LEGACY_PTYS=y
> +CONFIG_LEGACY_PTY_COUNT=256
> +CONFIG_LIBFDT=y
> +CONFIG_LOWMEM_CAM_NUM=3
> +CONFIG_LOWMEM_SIZE=0x30000000
> +CONFIG_LXT_PHY=y
> +# CONFIG_MATH_EMULATION is not set
> +CONFIG_MDIO_BOARDINFO=y
> +CONFIG_MIGRATION=y
> +# CONFIG_MMIO_NVRAM is not set
> +CONFIG_MODULES_USE_ELF_RELA=y
> +# CONFIG_MPC8536_DS is not set
> +# CONFIG_MPC8540_ADS is not set
> +# CONFIG_MPC8560_ADS is not set
> +# CONFIG_MPC85xx_CDS is not set
> +# CONFIG_MPC85xx_DS is not set
> +# CONFIG_MPC85xx_MDS is not set
> +# CONFIG_MPC85xx_RDB is not set
> +CONFIG_MPIC=y
> +# CONFIG_MPIC_MSGR is not set
> +CONFIG_MPIC_TIMER=y
> +# CONFIG_MPIC_U3_HT_IRQS is not set
> +# CONFIG_MPIC_WEIRD is not set
> +CONFIG_MPILIB=y
> +# CONFIG_MTD_CFI is not set
> +CONFIG_MTD_M25P80=y
> +CONFIG_MTD_SPI_NOR=y
> +# CONFIG_MVME2500 is not set
> +# CONFIG_NEED_DMA_MAP_STATE is not set
> +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
> +CONFIG_NEED_PER_CPU_KM=y
> +CONFIG_NEED_SG_DMA_LENGTH=y
> +CONFIG_NLS=y
> +# CONFIG_NONSTATIC_KERNEL is not set
> +CONFIG_NO_BOOTMEM=y
> +CONFIG_NR_IRQS=512
> +CONFIG_OF=y
> +CONFIG_OF_ADDRESS=y
> +CONFIG_OF_ADDRESS_PCI=y
> +CONFIG_OF_EARLY_FLATTREE=y
> +CONFIG_OF_FLATTREE=y
> +CONFIG_OF_GPIO=y
> +CONFIG_OF_IRQ=y
> +CONFIG_OF_MDIO=y
> +CONFIG_OF_NET=y
> +CONFIG_OF_PCI=y
> +CONFIG_OF_PCI_IRQ=y
> +CONFIG_OF_RESERVED_MEM=y
> +CONFIG_OLD_SIGACTION=y
> +CONFIG_OLD_SIGSUSPEND=y
> +# CONFIG_P1010_RDB is not set
> +# CONFIG_P1022_DS is not set
> +# CONFIG_P1022_RDK is not set
> +# CONFIG_P1023_RDB is not set
> +CONFIG_PAGE_OFFSET=0xc0000000
> +CONFIG_PCI=y
> +CONFIG_PCIEAER=y
> +CONFIG_PCIEASPM=y
> +# CONFIG_PCIEASPM_DEBUG is not set
> +CONFIG_PCIEASPM_DEFAULT=y
> +# CONFIG_PCIEASPM_PERFORMANCE is not set
> +# CONFIG_PCIEASPM_POWERSAVE is not set
> +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
> +CONFIG_PCIEPORTBUS=y
> +CONFIG_PCI_DOMAINS=y
> +CONFIG_PGTABLE_LEVELS=2
> +CONFIG_PHYLIB=y
> +CONFIG_PHYSICAL_ALIGN=0x04000000
> +CONFIG_PHYSICAL_START=0x00000000
> +# CONFIG_PHYS_64BIT is not set
> +# CONFIG_PPA8548 is not set
> +CONFIG_PPC=y
> +CONFIG_PPC32=y
> +# CONFIG_PPC64 is not set
> +CONFIG_PPC_85xx=y
> +# CONFIG_PPC_8xx is not set
> +# CONFIG_PPC_970_NAP is not set
> +CONFIG_PPC_ADV_DEBUG_DACS=2
> +CONFIG_PPC_ADV_DEBUG_DVCS=0
> +CONFIG_PPC_ADV_DEBUG_IACS=2
> +CONFIG_PPC_ADV_DEBUG_REGS=y
> +CONFIG_PPC_BOOK3E_MMU=y
> +# CONFIG_PPC_BOOK3S_32 is not set
> +# CONFIG_PPC_CELL is not set
> +# CONFIG_PPC_CELL_NATIVE is not set
> +# CONFIG_PPC_COPRO_BASE is not set
> +# CONFIG_PPC_DCR_MMIO is not set
> +# CONFIG_PPC_DCR_NATIVE is not set
> +CONFIG_PPC_DOORBELL=y
> +# CONFIG_PPC_E500MC is not set
> +# CONFIG_PPC_EARLY_DEBUG is not set
> +# CONFIG_PPC_EPAPR_HV_PIC is not set
> +CONFIG_PPC_FSL_BOOK3E=y
> +# CONFIG_PPC_I8259 is not set
> +# CONFIG_PPC_ICP_HV is not set
> +# CONFIG_PPC_ICP_NATIVE is not set
> +# CONFIG_PPC_ICS_RTAS is not set
> +CONFIG_PPC_INDIRECT_PCI=y
> +CONFIG_PPC_MMU_NOHASH=y
> +# CONFIG_PPC_MM_SLICES is not set
> +# CONFIG_PPC_MPC106 is not set
> +# CONFIG_PPC_P7_NAP is not set
> +CONFIG_PPC_PCI_CHOICE=y
> +# CONFIG_PPC_PTDUMP is not set
> +# CONFIG_PPC_QEMU_E500 is not set
> +# CONFIG_PPC_RTAS is not set
> +CONFIG_PPC_SMP_MUXED_IPI=y
> +CONFIG_PPC_UDBG_16550=y
> +CONFIG_PPC_WERROR=y
> +# CONFIG_PPC_XICS is not set
> +# CONFIG_PQ2ADS is not set
> +# CONFIG_PTP_1588_CLOCK_GIANFAR is not set
> +CONFIG_QE_GPIO=y
> +CONFIG_QE_USB=y
> +CONFIG_QUICC_ENGINE=y
> +CONFIG_RAS=y
> +# CONFIG_RCU_STALL_COMMON is not set
> +CONFIG_REGMAP=y
> +CONFIG_REGMAP_I2C=y
> +CONFIG_REGMAP_SPI=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_DRV_GENERIC=y
> +CONFIG_RTC_I2C_AND_SPI=y
> +CONFIG_RTC_MC146818_LIB=y
> +CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> +# CONFIG_SBC8548 is not set
> +# CONFIG_SCHED_INFO is not set
> +# CONFIG_SCSI_DMA is not set
> +CONFIG_SERIAL_8250_EXTENDED=y
> +CONFIG_SERIAL_8250_FSL=y
> +CONFIG_SERIAL_8250_SHARE_IRQ=y
> +CONFIG_SERIAL_OF_PLATFORM=y
> +# CONFIG_SERIAL_QE is not set
> +CONFIG_SIMPLE_GPIO=y
> +# CONFIG_SOCRATES is not set
> +CONFIG_SPARSE_IRQ=y
> +CONFIG_SPE=y
> +CONFIG_SPE_POSSIBLE=y
> +CONFIG_SPI=y
> +CONFIG_SPI_FSL_ESPI=y
> +CONFIG_SPI_FSL_LIB=y
> +CONFIG_SPI_MASTER=y
> +CONFIG_SRCU=y
> +# CONFIG_STRIP_ASM_SYMS is not set
> +# CONFIG_STX_GP3 is not set
> +CONFIG_SWCONFIG=y
> +CONFIG_SWIOTLB=y
> +CONFIG_SWPHY=y
> +CONFIG_SYSCTL_EXCEPTION_TRACE=y
> +CONFIG_TASK_SIZE=0xc0000000
> +CONFIG_TICK_CPU_ACCOUNTING=y
> +CONFIG_THREAD_SHIFT=13
> +# CONFIG_TL_WDR4900_V1 is not set
> +# CONFIG_TQM8540 is not set
> +# CONFIG_TQM8541 is not set
> +# CONFIG_TQM8548 is not set
> +# CONFIG_TQM8555 is not set
> +# CONFIG_TQM8560 is not set
> +# CONFIG_TWR_P102x is not set
> +CONFIG_UCC=y
> +CONFIG_UCC_FAST=y
> +CONFIG_UCC_GETH=y
> +# CONFIG_UGETH_TX_ON_DEMAND is not set
> +CONFIG_USB=y
> +CONFIG_USB_COMMON=y
> +CONFIG_USB_EHCI_FSL=y
> +CONFIG_USB_EHCI_HCD=y
> +# CONFIG_USB_EHCI_HCD_PLATFORM is not set
> +CONFIG_USB_EHCI_HCD_PPC_OF=y
> +CONFIG_USB_EHCI_PCI=y
> +CONFIG_USB_FHCI_HCD=y
> +CONFIG_USB_SUPPORT=y
> +# CONFIG_USB_UHCI_HCD is not set
> +CONFIG_VDSO32=y
> +# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
> +CONFIG_VM_EVENT_COUNTERS=y
> +CONFIG_WATCHDOG_CORE=y
> +# CONFIG_XES_MPC85xx is not set
> +# CONFIG_XPS_USB_HCD_XILINX is not set
> +CONFIG_XZ_DEC_BCJ=y
> +CONFIG_XZ_DEC_POWERPC=y
> diff --git
> a/target/linux/mpc85xx/patches-4.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
> b/target/linux/mpc85xx/patches-4.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
> new file mode 100644 index 0000000000..58c4be6007 --- /dev/null
> +++
> b/target/linux/mpc85xx/patches-4.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
> @@ -0,0 +1,10 @@ +--- a/arch/powerpc/platforms/85xx/common.c
> ++++ b/arch/powerpc/platforms/85xx/common.c
> +@@ -33,6 +33,7 @@ static const struct of_device_id mpc85xx
> + { .compatible = "fsl,mpc8548-guts", },
> + /* Probably unnecessary? */
> + { .compatible = "gpio-leds", },
> ++ { .compatible = "gpio-keys", },
> + /* For all PCI controllers */
> + { .compatible = "fsl,mpc8540-pci", },
> + { .compatible = "fsl,mpc8548-pcie", },
> diff --git
> a/target/linux/mpc85xx/patches-4.14/100-powerpc-85xx-tl-wdr4900-v1-support.patch
> b/target/linux/mpc85xx/patches-4.14/100-powerpc-85xx-tl-wdr4900-v1-support.patch
> new file mode 100644 index 0000000000..7c82ba4d1f --- /dev/null
> +++
> b/target/linux/mpc85xx/patches-4.14/100-powerpc-85xx-tl-wdr4900-v1-support.patch
> @@ -0,0 +1,80 @@ +From 406d86e5990ac171f18ef6e2973672d8fbfe1556 Mon
> Sep 17 00:00:00 2001 +From: Gabor Juhos <juh...@openwrt.org>
> +Date: Wed, 20 Feb 2013 08:40:33 +0100
> +Subject: [PATCH] powerpc: 85xx: add support for the TP-Link
> TL-WDR4900 v1
> + board
> +
> +This patch adds support for the TP-Link TL-WDR4900 v1
> +concurrent dual-band wireless router. The devices uses
> +the Freescale P1014 SoC.
> +
> +Signed-off-by: Gabor Juhos <juh...@openwrt.org>
> +---
> + arch/powerpc/boot/Makefile | 3 +
> + arch/powerpc/boot/wrapper | 4 +
> + arch/powerpc/platforms/85xx/Kconfig | 11 ++
> + arch/powerpc/platforms/85xx/Makefile | 1 +
> +
> +--- a/arch/powerpc/boot/Makefile
> ++++ b/arch/powerpc/boot/Makefile
> +@@ -150,6 +150,7 @@
> + src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
> + src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
> + src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
> ++src-plat-$(CONFIG_TL_WDR4900_V1) += cuboot-tl-wdr4900-v1.c
> +
> + src-wlib := $(sort $(src-wlib-y))
> + src-plat := $(sort $(src-plat-y))
> +@@ -329,6 +330,7 @@
> + image-$(CONFIG_TQM8560) += cuImage.tqm8560
> + image-$(CONFIG_SBC8548) += cuImage.sbc8548
> + image-$(CONFIG_KSI8560) += cuImage.ksi8560
> ++image-$(CONFIG_TL_WDR4900_V1) +=
> cuImage.tl-wdr4900-v1 +
> + # Board ports in arch/powerpc/platform/86xx/Kconfig
> + image-$(CONFIG_MVME7100) += dtbImage.mvme7100
> +Nur in b/arch/powerpc/boot: Makefile.orig.
> +--- a/arch/powerpc/boot/wrapper
> ++++ b/arch/powerpc/boot/wrapper
> +@@ -277,6 +277,10 @@
> + *-mpc85*|*-tqm85*|*-sbc85*)
> + platformo=$object/cuboot-85xx.o
> + ;;
> ++ *-tl-wdr4900-v1)
> ++ platformo=$object/cuboot-tl-wdr4900-v1.o
> ++ link_address='0x1000000'
> ++ ;;
> + *-amigaone)
> + link_address='0x800000'
> + ;;
> +--- a/arch/powerpc/platforms/85xx/Kconfig
> ++++ b/arch/powerpc/platforms/85xx/Kconfig
> +@@ -170,6 +170,17 @@
> + select CPM2
> + select DEFAULT_UIMAGE
> +
> ++config TL_WDR4900_V1
> ++ bool "TP-Link TL-WDR4900 v1"
> ++ select DEFAULT_UIMAGE
> ++ select ARCH_REQUIRE_GPIOLIB
> ++ select GPIO_MPC8XXX
> ++ help
> ++ This option enables support for the TP-Link TL-WDR4900 v1
> board. ++
> ++ This board is a Concurrent Dual-Band wireless router with
> a ++ Freescale P1014 SoC.
> ++
> + config TQM8540
> + bool "TQ Components TQM8540"
> + help
> +Nur in b/arch/powerpc/platforms/85xx: Kconfig.orig.
> +--- a/arch/powerpc/platforms/85xx/Makefile
> ++++ b/arch/powerpc/platforms/85xx/Makefile
> +@@ -26,6 +26,7 @@
> + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
> + obj-$(CONFIG_STX_GP3) += stx_gp3.o
> + obj-$(CONFIG_TQM85xx) += tqm85xx.o
> ++obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
> + obj-$(CONFIG_SBC8548) += sbc8548.o
> + obj-$(CONFIG_PPA8548) += ppa8548.o
> + obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
> diff --git
> a/target/linux/mpc85xx/patches-4.14/101-powerpc-85xx-hiveap-330-support.patch
> b/target/linux/mpc85xx/patches-4.14/101-powerpc-85xx-hiveap-330-support.patch
> new file mode 100644 index 0000000000..a5095f4abf --- /dev/null
> +++
> b/target/linux/mpc85xx/patches-4.14/101-powerpc-85xx-hiveap-330-support.patch
> @@ -0,0 +1,30 @@ +--- a/arch/powerpc/platforms/85xx/Kconfig
> ++++ b/arch/powerpc/platforms/85xx/Kconfig
> +@@ -49,6 +49,17 @@
> + and dual StarCore SC3850 DSP cores.
> + Manufacturer : Freescale Semiconductor, Inc
> +
> ++config HIVEAP_330
> ++ bool "Aerohive HiveAP-330"
> ++ select DEFAULT_UIMAGE
> ++ select ARCH_REQUIRE_GPIOLIB
> ++ select GPIO_MPC8XXX
> ++ help
> ++ This option enables support for the Aerohive HiveAP-330
> board. ++
> ++ This board is a Concurrent Dual-Band wireless access
> point with a ++ Freescale P1020 SoC.
> ++
> + config MPC8540_ADS
> + bool "Freescale MPC8540 ADS"
> + select DEFAULT_UIMAGE
> +--- a/arch/powerpc/platforms/85xx/Makefile
> ++++ b/arch/powerpc/platforms/85xx/Makefile
> +@@ -10,6 +10,7 @@
> + obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
> + obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
> + obj-$(CONFIG_C293_PCIE) += c293pcie.o
> ++obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
> + obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
> + obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
> + obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
> diff --git
> a/target/linux/mpc85xx/patches-4.14/102-powerpc-add-cmdline-override.patch
> b/target/linux/mpc85xx/patches-4.14/102-powerpc-add-cmdline-override.patch
> new file mode 100644 index 0000000000..8294f4560c --- /dev/null
> +++
> b/target/linux/mpc85xx/patches-4.14/102-powerpc-add-cmdline-override.patch
> @@ -0,0 +1,37 @@ +--- a/arch/powerpc/Kconfig
> ++++ b/arch/powerpc/Kconfig
> +@@ -830,6 +830,14 @@
> + This is useful if you cannot or don't want to change the
> + command-line options your boot loader passes to the
> kernel. +
> ++config CMDLINE_OVERRIDE
> ++ bool "Use alternative cmdline from device tree"
> ++ help
> ++ Some bootloaders may have uneditable bootargs. While
> CMDLINE_FORCE can ++ be used, this is not a good option for
> kernels that are shared across ++ devices. This setting
> enables using "chosen/cmdline-override" as the ++ cmdline if
> it exists in the device tree. ++
> + config EXTRA_TARGETS
> + string "Additional default image types"
> + help
> +--- a/drivers/of/fdt.c
> ++++ b/drivers/of/fdt.c
> +@@ -1131,6 +1131,17 @@
> + if (p != NULL && l > 0)
> + strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
> +
> ++ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a
> different ++ * device tree option of
> chosen/bootargs-override. This is ++ * helpful on boards
> where u-boot sets bootargs, and is unable ++ * to be modified.
> ++ */
> ++#ifdef CONFIG_CMDLINE_OVERRIDE
> ++ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
> ++ if (p != NULL && l > 0)
> ++ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
> ++#endif
> ++
> + /*
> + * CONFIG_CMDLINE is meant to be a default in case nothing
> else
> + * managed to set the command line, unless
> CONFIG_CMDLINE_FORCE ---
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/listinfo/openwrt-devel
Hi,
your patch for target/linux/mpc85xx/Makefile contains a typo.
+KERNEL_PATCHVER:=4.4
should be
+KERNEL_PATCHVER:=4.14
Regards
Martin
--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/listinfo/openwrt-devel
