surely I prefer the option 1,
I thought the wiki is out date already, because I found the
etc/config/network in packages/base-files
thanks
I am trying it
On 28 February 2018 at 23:47, Magnus Kroken <mkro...@gmail.com> wrote:
> Hi Bill
>
> On 28.02.2018 15:18, Bill Yuan wrote:
>
>> Hi,
>>
>> I noticed the default LAN IP is still 192.168.1.1 even after I configured
>> the "preinit network interface" in "preinit configuration options". Can
>> someone please share with me where is the proper way to pre-define the LAN
>> IP?
>>
>
> The build system does not include a way to do this. You can do this by
> including additional files in your image. To do this, create a directory
> "files" in the root of the build directory (same directory you run make
> menuconfig from).
>
> You can either include a full network configuration file in the image, or
> you can include a script that will execute after the device has booted,
> which configures the IP address.
>
> For a full configuration, configure the network as you want it to be, then
> copy /etc/config/network from your OpenWrt device to your files/ folder, so
> it ends up as: files/etc/config/network.
>
> For a script, here is a snippet of how I do this on my devices. You can
> omit the if check, I do this so I can use the same script on several
> devices.
>
> --8<--
> #!/bin/sh
>
> if [ "$(ip link show eth0 | awk '/ether/ {print $2}')" ==
> "11:22:33:44:55:66" -a "$(uci -q get network.lan.ipaddr)" == "192.168.1.1" ]
> then
> uci -q set network.lan.ipaddr='10.123.234.1'
> fi
>
> /etc/init.d/network restart
> -->8--
>
> Put this in files/etc/uci-defaults/zz_changeip4.sh. The zz prefix ensures
> the file is executed last in the uci-defaults folder, if it executes too
> early the base network config may not be in place yet.
>
> Regards,
>> bycn82
>>
>
> Regards
> /Magnus
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
