I'm having trouble getting Ethernet working while developing a patch to add support for TL-WA850RE v2 based on TL-WR841N v9. Using a PC that connects to stock OpenWRT on a WA850RE v1, ethtool shows a connection but arp shows "(incomplete)" (i.e. no MAC address). All commands like telnet fail with "no route to host".
Can anyone suggest changes or debugging I should try? I tried leaving everything exactly as TL-WR841N v9 with the exception of the TPLINK-HWID. Then I changed the eth init to only init eth0 like this: ath79_switch_data.phy4_mii_en = 1; ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ath79_eth0_data.phy_mask = BIT(4); ath79_eth0_data.duplex = DUPLEX_FULL; ath79_eth0_data.speed = SPEED_100; ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); ath79_register_eth(0); And changed 02_network to only init eth0 like this: ucidef_set_interface_lan "eth0" Interestingly, with the first approach (no changes), a LED flashes when Ethernet is connected which doesn't happen for the second approach. But neither seem active at the ARP level. Thanks, Kris
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
