Hi Everyone, I want to buld openwrt for this cpu: CPU0 revision is: 00019750 (MIPS 74Kc). Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz Currently I cannot find the correct options for this. The board that is reported is this: board=COMFAST-CF-WR650AC It carries this chipset: SoC: Qualcomm Atheros QCA9558 ver 1 rev 0 It reports this switch:
[ 0.830000] switch0: Atheros AR8337 rev. 2 switch registered on ag71xx-mdio.0 [ 0.920000] libphy: ag71xx_mdio: probed [ 1.520000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316] [ 1.530000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII [ 2.120000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII Any hints as to what to chose to make this happen? Thanks, Reinoud. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
