This patch adds support for the SamKnows version 8.0 Whitebox, built
around the MT7621 platform. 2.4GHz appears to be working, albeit
poorly; 5GHz not working yet.
Fixed in v4:
- I didn't commit some fixes in PATCHv3, that's fixed now
- DTS: Syntax error fixed, LEDs and buttons mapped correctly now
- diag.sh updated to blink WPS LED on boot
- 2.4GHz wifi is working but txpower is stuck at 0, DTS ROM offset
matches SamKnows firmware
- 5GHz wifi not working, DTS pcie1,0 matches SamKnows firmware
Initial support for SamKnows SK-WB8
Signed-off-by: Andrew Yong <m...@ndoo.sg>
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index e3b8500..df30085 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -241,6 +241,9 @@ rt-n14u)
set_wifi_led "$board:blue:air"
set_usb_led "$board:blue:usb"
;;
+sk-wb8)
+ set_usb_led "$board:green:usb"
+ ;;
tiny-ac)
set_wifi_led "$board:orange:wifi"
set_usb_led "$board:green:usb"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index 3c958ae..3e876d2 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -77,6 +77,7 @@ ramips_setup_interfaces()
pbr-m1|\
psg1208|\
sap-g3200u3|\
+ sk-wb8|\
wf-2881|\
whr-300hp2|\
whr-600d|\
@@ -310,6 +311,9 @@ ramips_setup_macs()
lan_mac=$(macaddr_setbit_la "$lan_mac")
wan_mac=$(mtd_get_mac_binary factory 32772)
;;
+ sk-wb8)
+ wan_mac=$(mtd_get_mac_binary factory 57350)
+ ;;
tew-691gr)
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 3)
diff --git a/target/linux/ramips/base-files/etc/diag.sh
b/target/linux/ramips/base-files/etc/diag.sh
index bd0ff05..a941fca 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -76,7 +76,8 @@ get_status_led() {
;;
awapn2403|\
dir-645|\
- wrh-300cr)
+ wrh-300cr|\
+ sk-wb8)
status_led="$board:green:wps"
;;
cf-wr800n|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index 550ec55..4f1bd41 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -370,6 +370,9 @@ ramips_board_detect() {
*"SAP-G3200U3")
name="sap-g3200u3"
;;
+ *"SamKnows Whitebox 8")
+ name="sk-wb8"
+ ;;
*"SL-R7205"*)
name="sl-r7205"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 73ba6e6..fcc1b79 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -109,6 +109,7 @@ platform_check_image() {
rt-n56u|\
rut5xx|\
sap-g3200u3|\
+ sk-wb8|\
sl-r7205|\
tew-691gr|\
tew-692gr|\
diff --git a/target/linux/ramips/dts/SK-WB8.dts
b/target/linux/ramips/dts/SK-WB8.dts
new file mode 100644
index 0000000..3292194
--- /dev/null
+++ b/target/linux/ramips/dts/SK-WB8.dts
@@ -0,0 +1,122 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+/ {
+ compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+ model = "SamKnows SK-WB8";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ palmbus@1E000000 {
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l6405d";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+
+ };
+ };
+ };
+
+ pcie@1e140000 {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+ };
+
+ ethernet@1e100000 {
+ mtd-mac-address = <&factory 0xe000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "sk-wb8:green:wps";
+ gpios = <&gpio1 14 1>;
+ };
+
+ usb {
+ label = "sk-wb8:green:usb";
+ gpios = <&gpio1 15 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ wps {
+ label = "wps";
+ gpios = <&gpio1 11 1>;
+ linux,code = <0x211>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio1 9 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uart2",
"uart3", "rgmii2", "sdhci";
+ ralink,function = "gpio";
+ };
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk
b/target/linux/ramips/image/mt7621.mk
index 0af9596..3e2f7eb 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -132,6 +132,12 @@ define Device/ubnt-erx
endef
TARGET_DEVICES += ubnt-erx
+define Device/sk-wb8
+ DTS := SK-WB8
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+TARGET_DEVICES += sk-wb8
+
# FIXME: is this still needed?
define Image/Prepare
#define Build/Compile
diff --git a/target/linux/ramips/mt7621/profiles/sk-wb8.mk
b/target/linux/ramips/mt7621/profiles/sk-wb8.mk
new file mode 100644
index 0000000..efa4858
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/sk-wb8.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/SK-WB8
+ NAME:=SK-WB8 Profile
+ PACKAGES:=\
+ kmod-usb-core kmod-usb3 \
+ kmod-ledtrig-usbdev
+endef
+
+define Profile/SK-WB8/Description
+ Package set optimized for the SamKnows SK-WB8.
+endef
+$(eval $(call Profile,SK-WB8))
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
