Hi Imre,
here I attach devinfo and dmseg. I also copy kernel log, as I do have a
warning with pcie2 there. Its unrelated to ethernet, but I'm still
trying to fix it:
DEVINFO:
root@OpenWrt:/# cat /dev/mtd12
cert_region=US
default_passphrase=8mh3mb6wyq
default_ssid=Linksys05820
deviceType=urn:home-linksys-com:device:Router:1
devinfo_version=20140721.1
hw_mac_addr=C0:56:27:27:1F:D9
hw_revision=1
hw_version=XB
manufacturer=Linksys, LLC
manufacturerURL=http://www.linksys.com
manufacturer_date=2015/09/19
mfg_data_version=1
modelDescription=Simultaneous Dual-Band Wireless-AC Gigabit Router
modelNumber=EA8500
serial_number=16T10C69505820
sw_version=v0.0.6
tc_passphrase=8mH3Mb6wYQCZYH2EkRLtUYwKu0OvMP6TCMWWxbTT1d0Xs2kbR5UvdODVNZQjzVA
tc_ssid=15c8lkbrZDC7wyifIUHDJrSyBFjnGDfF
uuid_key=0246C456-1DD3-11B2-8B16-C05627271FD9
wps_device_pin=61700710
DMSEG:
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 4.986273] ohci_hcd: USB
1.1 'Open' Host Controller (OHCI) Driver
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 4.989103] ohci-platform:
OHCI generic platform driver
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.491133] xhci-hcd
xhci-hcd.0.auto: xHCI Host Controller
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.491180] xhci-hcd
xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.495790] xhci-hcd
xhci-hcd.0.auto: irq 142, io mem 0x11000000
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.503686] hub 1-0:1.0:
USB hub found
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.509340] hub 1-0:1.0: 1
port detected
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.513180] xhci-hcd
xhci-hcd.0.auto: xHCI Host Controller
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.516955] xhci-hcd
xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.522807] hub 2-0:1.0:
USB hub found
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.529815] hub 2-0:1.0: 1
port detected
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.533956] xhci-hcd
xhci-hcd.1.auto: xHCI Host Controller
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.537710] xhci-hcd
xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.543244] xhci-hcd
xhci-hcd.1.auto: irq 237, io mem 0x10000000
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.550992] hub 3-0:1.0:
USB hub found
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.556861] hub 3-0:1.0: 1
port detected
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.560562] xhci-hcd
xhci-hcd.1.auto: xHCI Host Controller
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.564502] xhci-hcd
xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.570216] hub 4-0:1.0:
USB hub found
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.577354] hub 4-0:1.0: 1
port detected
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 5.581928]
of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/wps[0]' - status (0)
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 5.581941]
of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/power[0]' - status (0)
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 5.581952]
of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/wifi[0]' - status (0)
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 5.581965]
of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/wps[0]' - status (0)
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 5.582061]
of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/power[0]' - status (0)
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 5.582134]
of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/wifi[0]' - status (0)
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 5.583619] usbcore:
registered new interface driver usb-storage
Thu Mar 31 06:35:08 2016 user.info kernel: [ 5.743345] init: - preinit -
Thu Mar 31 06:35:08 2016 kern.notice kernel: [ 9.218507] UBIFS:
background thread "ubifs_bgt0_1" started, PID 81
Thu Mar 31 06:35:08 2016 kern.notice kernel: [ 9.352817] UBIFS:
recovery needed
Thu Mar 31 06:35:08 2016 kern.notice kernel: [ 9.543046] UBIFS:
recovery completed
Thu Mar 31 06:35:08 2016 kern.notice kernel: [ 9.543158] UBIFS:
mounted UBI device 0, volume 1, name "rootfs_data"
Thu Mar 31 06:35:08 2016 kern.notice kernel: [ 9.545828] UBIFS: LEB
size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048
bytes
Thu Mar 31 06:35:08 2016 kern.notice kernel: [ 9.552169] UBIFS: FS
size: 12951552 bytes (12 MiB, 102 LEBs), journal size 1015809 bytes (0
MiB, 6 LEBs)
Thu Mar 31 06:35:08 2016 kern.notice kernel: [ 9.561425] UBIFS:
reserved for root: 611733 bytes (597 KiB)
Thu Mar 31 06:35:08 2016 kern.notice kernel: [ 9.570876] UBIFS: media
format: w4/r0 (latest is w4/r0), UUID
04F095CF-14F0-454E-ABCB-3C9ABB91DB4F, small LPT model
Thu Mar 31 06:35:08 2016 user.info kernel: [ 9.583292] mount_root:
switching to jffs2 overlay
Thu Mar 31 06:35:08 2016 user.info kernel: [ 9.951259] procd: - early -
Thu Mar 31 06:35:08 2016 user.info kernel: [ 9.951321] procd: -
watchdog -
Thu Mar 31 06:35:08 2016 user.info kernel: [ 10.605817] procd: - ubus -
Thu Mar 31 06:35:08 2016 user.info kernel: [ 11.645716] procd: - init -
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 12.150493] ntfs: driver
2.1.31 [Flags: R/O MODULE].
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 12.153531] tun: Universal
TUN/TAP device driver, 1.6
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 12.154518] tun: (C)
1999-2004 Max Krasnyansky <m...@qualcomm.com>
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 12.163300] ip6_tables:
(C) 2000-2006 Netfilter Core Team
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 12.171856] Loading
modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 12.171882] Backport
generated by backports.git backports-20151218-0-g2f58d9d
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 12.194478] ath10k_pci
0000:01:00.0: enabling device (0140 -> 0142)
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 12.195227] ath10k_pci
0000:01:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 12.496257] ath10k_pci
0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub
168c:0002
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 12.496295] ath10k_pci
0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 12.505943] ath10k_pci
0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32
d2901e01
Thu Mar 31 06:35:08 2016 kern.warn kernel: [ 14.552433] ath10k_pci
0000:01:00.0: unable to read from the device
Thu Mar 31 06:35:08 2016 kern.err kernel: [ 14.552460] ath10k_pci
0000:01:00.0: could not execute otp for board id check: -110
Thu Mar 31 06:35:08 2016 kern.err kernel: [ 14.557502] ath10k_pci
0000:01:00.0: failed to get board id from otp: -110
Thu Mar 31 06:35:08 2016 kern.err kernel: [ 14.557502] , ignored
Thu Mar 31 06:35:08 2016 kern.err kernel: [ 14.565674] ath10k_pci
0000:01:00.0: failed to fetch board data for
bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002
from ath10k/QCA99X0/hw2.0/board-2.bin
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 14.584024] ath10k_pci
0000:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 15.978250] ath10k_pci
0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0
hwcrypto 1
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 16.035623] ath: EEPROM
regdomain: 0x0
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 16.035630] ath: EEPROM
indicates default country code should be used
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 16.035636] ath: doing
EEPROM country->regdmn map search
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 16.035644] ath: country
maps to regdmn code: 0x3a
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 16.035651] ath: Country
alpha2 being used: US
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 16.035657] ath: Regpair
used: 0x3a
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 16.039332] ath10k_pci
0001:01:00.0: enabling device (0140 -> 0142)
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 16.040106] ath10k_pci
0001:01:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 16.175838] ath10k_pci
0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub
168c:0002
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 16.175874] ath10k_pci
0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 16.185739] ath10k_pci
0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32
d2901e01
Thu Mar 31 06:35:08 2016 kern.warn kernel: [ 18.232442] ath10k_pci
0001:01:00.0: unable to read from the device
Thu Mar 31 06:35:08 2016 kern.err kernel: [ 18.232468] ath10k_pci
0001:01:00.0: could not execute otp for board id check: -110
Thu Mar 31 06:35:08 2016 kern.err kernel: [ 18.237510] ath10k_pci
0001:01:00.0: failed to get board id from otp: -110
Thu Mar 31 06:35:08 2016 kern.err kernel: [ 18.237510] , ignored
Thu Mar 31 06:35:08 2016 kern.err kernel: [ 18.245347] ath10k_pci
0001:01:00.0: failed to fetch board data for
bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002
from ath10k/QCA99X0/hw2.0/board-2.bin
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 18.254712] ath10k_pci
0001:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.653687] ath10k_pci
0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0
hwcrypto 1
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 19.716178] ath: EEPROM
regdomain: 0x0
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 19.716186] ath: EEPROM
indicates default country code should be used
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 19.716193] ath: doing
EEPROM country->regdmn map search
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 19.716202] ath: country
maps to regdmn code: 0x3a
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 19.716209] ath: Country
alpha2 being used: US
Thu Mar 31 06:35:08 2016 kern.debug kernel: [ 19.716215] ath: Regpair
used: 0x3a
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.724461] u32 classifier
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.724481] input device
check on
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.726054] Actions
configured
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.730701]
Mirror/redirect action on
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.736119] nf_conntrack
version 0.5.0 (7523 buckets, 30092 max)
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.739611] ip_tables: (C)
2000-2006 Netfilter Core Team
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.824663] usbcore:
registered new interface driver ums-alauda
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.825346] usbcore:
registered new interface driver ums-cypress
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.830068] usbcore:
registered new interface driver ums-datafab
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.836357] usbcore:
registered new interface driver ums-freecom
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.842383] usbcore:
registered new interface driver ums-isd200
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.848303] usbcore:
registered new interface driver ums-jumpshot
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.853992] usbcore:
registered new interface driver ums-karma
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.860325] usbcore:
registered new interface driver ums-sddr09
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.866016] usbcore:
registered new interface driver ums-sddr55
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.871818] usbcore:
registered new interface driver ums-usbat
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.889070] xt_time:
kernel timezone is -0000
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.893315] PPP generic
driver version 2.4.2
Thu Mar 31 06:35:08 2016 kern.info kernel: [ 19.894029] NET:
Registered protocol family 24
Thu Mar 31 06:35:09 2016 user.notice : 'radio0' is disabled
Thu Mar 31 06:35:09 2016 user.notice : 'radio1' is disabled
Thu Mar 31 06:35:09 2016 user.notice : 'radio0' is disabled
Thu Mar 31 06:35:09 2016 user.notice : 'radio1' is disabled
Thu Mar 31 06:35:09 2016 authpriv.info dropbear[542]: Not backgrounding
Thu Mar 31 06:35:09 2016 kern.info kernel: [ 22.945241] eth0: device
MAC address 00:06:3b:01:41:00
Thu Mar 31 06:35:09 2016 kern.info kernel: [ 22.960202] device eth0.1
entered promiscuous mode
Thu Mar 31 06:35:09 2016 kern.info kernel: [ 22.960226] device eth0
entered promiscuous mode
Thu Mar 31 06:35:09 2016 kern.info kernel: [ 22.967086] br-lan: port
1(eth0.1) entered forwarding state
Thu Mar 31 06:35:09 2016 kern.info kernel: [ 22.968679] br-lan: port
1(eth0.1) entered forwarding state
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'lan' is enabled
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'lan' is
setting up now
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'lan' is now up
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'loopback' is
enabled
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'loopback' is
setting up now
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'loopback' is
now up
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'wan' is enabled
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'wan6' is enabled
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Bridge 'br-lan' link is up
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'lan' has link
connectivity
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Network device 'eth0'
link is up
Thu Mar 31 06:35:09 2016 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Network device 'lo' link
is up
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'loopback' has
link connectivity
Thu Mar 31 06:35:09 2016 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'wan' has link
connectivity
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'wan' is
setting up now
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'wan6' has link
connectivity
Thu Mar 31 06:35:09 2016 daemon.notice netifd: Interface 'wan6' is
setting up now
Thu Mar 31 06:35:10 2016 daemon.notice netifd: wan (677): udhcpc
(v1.24.1) started
Thu Mar 31 06:35:10 2016 daemon.notice netifd: wan (677): Sending
discover...
Thu Mar 31 06:35:10 2016 daemon.err insmod: module is already loaded -
xt_multiport
Thu Mar 31 06:35:10 2016 daemon.err insmod: module is already loaded -
xt_comment
Thu Mar 31 06:35:10 2016 daemon.err insmod: module is already loaded -
xt_length
Thu Mar 31 06:35:10 2016 user.notice firewall: Reloading firewall due to
ifup of lan (br-lan)
Thu Mar 31 06:35:11 2016 daemon.err insmod: module is already loaded -
xt_multiport
Thu Mar 31 06:35:11 2016 daemon.err insmod: module is already loaded -
xt_comment
Thu Mar 31 06:35:11 2016 daemon.err insmod: module is already loaded -
xt_length
Thu Mar 31 06:35:11 2016 kern.info kernel: [ 24.942486]
ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full -
flow control off
Thu Mar 31 06:35:11 2016 kern.info kernel: [ 24.962260] br-lan: port
1(eth0.1) entered forwarding state
Thu Mar 31 06:35:12 2016 user.notice : mv: can't rename
'/etc/collectd.conf': Invalid argument
Thu Mar 31 06:35:12 2016 user.notice : ln: /etc/collectd.conf: File exists
Thu Mar 31 06:35:13 2016 daemon.info procd: - init complete -
Thu Mar 31 06:35:13 2016 daemon.notice netifd: wan (677): Sending
discover...
Thu Mar 31 06:35:13 2016 daemon.warn odhcpd[500]: DHCPV6 SOLICIT IA_NA
from 000476e1971449c37edcc8e5bdb7340357e9 on br-lan: ok
fd7e:151:2a7f::eec/128
Thu Mar 31 06:35:14 2016 daemon.warn odhcpd[500]: DHCPV6 REQUEST IA_NA
from 000476e1971449c37edcc8e5bdb7340357e9 on br-lan: ok
fd7e:151:2a7f::eec/128
Thu Mar 31 06:35:16 2016 daemon.notice netifd: wan (677): Sending
discover...
Thu Mar 31 06:35:23 2016 daemon.warn odhcpd[500]: DHCPV6 SOLICIT IA_NA
from 000100011c3ca12c6451069fdb33 on br-lan: ok fd7e:151:2a7f::78c/128
Thu Mar 31 06:35:33 2016 daemon.info dnsmasq[1168]: started, version
2.75 cachesize 150
Thu Mar 31 06:35:33 2016 daemon.info dnsmasq[1168]: compile time
options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua
TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Thu Mar 31 06:35:33 2016 daemon.info dnsmasq[1168]: DNS service limited
to local subnets
Thu Mar 31 06:35:33 2016 daemon.info dnsmasq-dhcp[1168]: DHCP, IP range
192.168.1.100 -- 192.168.1.249, lease time 12h
Thu Mar 31 06:35:33 2016 daemon.info dnsmasq[1168]: using nameserver
10.190.2.50#53
Thu Mar 31 06:35:33 2016 daemon.info dnsmasq[1168]: using local
addresses only for domain lan
Thu Mar 31 06:35:33 2016 daemon.warn dnsmasq[1168]: no servers found in
/tmp/resolv.conf.auto, will retry
Thu Mar 31 06:35:33 2016 daemon.info dnsmasq[1168]: read /etc/hosts - 4
addresses
Thu Mar 31 06:35:33 2016 daemon.info dnsmasq[1168]: read /tmp/hosts/dhcp
- 1 addresses
Thu Mar 31 06:35:33 2016 daemon.info dnsmasq-dhcp[1168]: read
/etc/ethers - 0 addresses
Thu Mar 31 06:35:41 2016 daemon.info dnsmasq-dhcp[1168]:
DHCPDISCOVER(br-lan) 10.0.2.15 08:00:27:da:9d:50
Thu Mar 31 06:35:41 2016 daemon.info dnsmasq-dhcp[1168]:
DHCPOFFER(br-lan) 192.168.1.148 08:00:27:da:9d:50
Thu Mar 31 06:35:41 2016 daemon.info dnsmasq-dhcp[1168]:
DHCPREQUEST(br-lan) 192.168.1.148 08:00:27:da:9d:50
Thu Mar 31 06:35:41 2016 daemon.info dnsmasq-dhcp[1168]: DHCPACK(br-lan)
192.168.1.148 08:00:27:da:9d:50 adrian-VirtualBox
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq-dhcp[1168]:
DHCPDISCOVER(br-lan) 64:51:06:9f:db:33
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq-dhcp[1168]:
DHCPOFFER(br-lan) 192.168.1.159 64:51:06:9f:db:33
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq-dhcp[1168]:
DHCPREQUEST(br-lan) 192.168.1.159 64:51:06:9f:db:33
Thu Mar 31 06:35:55 2016 daemon.warn dnsmasq-dhcp[1168]: Ignoring domain
ternium.techint.net for DHCP host name ternp309711
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq-dhcp[1168]: DHCPACK(br-lan)
192.168.1.159 64:51:06:9f:db:33 ternp309711
Thu Mar 31 06:35:55 2016 daemon.warn odhcpd[500]: DHCPV6 SOLICIT IA_NA
from 000100011c3ca12c6451069fdb33 on br-lan: ok fd7e:151:2a7f::78c/128
Thu Mar 31 06:35:55 2016 daemon.warn odhcpd[500]: DHCPV6 REQUEST IA_NA
from 000100011c3ca12c6451069fdb33 on br-lan: ok fd7e:151:2a7f::78c/128
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq[1168]: read /etc/hosts - 4
addresses
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq[1168]: read
/tmp/hosts/odhcpd - 2 addresses
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq[1168]: read /tmp/hosts/dhcp
- 1 addresses
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq-dhcp[1168]: read
/etc/ethers - 0 addresses
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq[1168]: read /etc/hosts - 4
addresses
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq[1168]: read
/tmp/hosts/odhcpd - 2 addresses
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq[1168]: read /tmp/hosts/dhcp
- 1 addresses
Thu Mar 31 06:35:55 2016 daemon.info dnsmasq-dhcp[1168]: read
/etc/ethers - 0 addresses
Thu Mar 31 06:35:58 2016 daemon.info dnsmasq-dhcp[1168]:
DHCPINFORM(br-lan) 192.168.1.159 64:51:06:9f:db:33
Thu Mar 31 06:35:58 2016 daemon.info dnsmasq-dhcp[1168]: DHCPACK(br-lan)
192.168.1.159 64:51:06:9f:db:33 ternp309711
KLOG
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.18.26 (adrian@adrian-VirtualBox) (gcc
version 5.2.0 (OpenWrt GCC 5.2.0 r48754) ) #5 SMP PREEMPT Thu Mar 31
19:26:30 UTC 2016
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7),
cr=10c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction
cache
[ 0.000000] Machine model: Linksys EA8500 WiFi Router
[ 0.000000] Ignoring memory range 0x41500000 - 0x42000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0729d80, node_mem_map
ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 9 pages/cpu @ddc16000 s7360 r8192 d21312
u36864
[ 0.000000] pcpu-alloc: s7360 r8192 d21312 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 121920
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8
mangled_rootblock=16
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Memory: 481332K/491520K available (3566K kernel code,
258K rwdata, 1448K rodata, 192K init, 290K bss, 10188K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff000000 ( 520 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc06eddf0 (5016 kB)
[ 0.000000] .init : 0xc06ee000 - 0xc071e000 ( 192 kB)
[ 0.000000] .data : 0xc071e000 - 0xc075e8d0 ( 259 kB)
[ 0.000000] .bss : 0xc075e8d0 - 0xc07a7110 ( 291 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000009] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps
every 687194767200ns
[ 0.000025] Switching to timer-based delay loop, resolution 160ns
[ 0.000179] Calibrating delay loop (skipped), value calculated using
timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000202] pid_max: default: 32768 minimum: 301
[ 0.000361] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000379] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.000987] CPU: Testing write buffer coherency: ok
[ 0.001274] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001788] Setting up static identity map for 0x422129c8 - 0x42212a20
[ 0.084119] CPU1: Booted secondary processor
[ 0.084245] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.084363] Brought up 2 CPUs
[ 0.084386] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.084396] CPU: All CPU(s) started in SVC mode.
[ 0.098321] VFP support v0.3: implementor 51 architecture 0 part 4d
variant 2 rev 0
[ 0.098843] pinctrl core: initialized pinctrl subsystem
[ 0.099309] regulator-dummy: no parameters
[ 0.107261] NET: Registered protocol family 16
[ 0.107538] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.134566] cpuidle: using governor ladder
[ 0.165583] cpuidle: using governor menu
[ 0.179486] gpiochip_add: registered GPIOs 0 to 68 on device:
800000.pinmux
[ 0.179508] GPIO chip 800000.pinmux: created GPIO range 0->68 ==>
800000.pinmux PIN 0->68
[ 0.181128] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 0.181198] qcom_rpm 108000.rpm: failed to mark ack irq as wakeup
[ 0.181263] qcom_rpm 108000.rpm: failed to mark wakeup irq as wakeup
[ 0.208949] smb208-s1a: 1050 <--> 1150 mV
[ 0.209315] smb208-s1b: 1050 <--> 1150 mV
[ 0.209658] smb208-s2a: 800 <--> 1250 mV
[ 0.210027] smb208-s2b: 800 <--> 1250 mV
[ 0.210549] pps_core: LinuxPPS API ver. 1 registered
[ 0.210564] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giome...@linux.it>
[ 0.210611] PTP clock support registered
[ 0.212055] Switched to clocksource dg_timer
[ 0.213658] NET: Registered protocol family 2
[ 0.214464] TCP established hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.214506] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.214561] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.214610] TCP: reno registered
[ 0.214634] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.214657] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.214907] NET: Registered protocol family 1
[ 0.214986] PCI: CLS 0 bytes, default 64
[ 0.216467] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.225580] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.225612] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.226614] msgmni has been set to 940
[ 0.228289] io scheduler noop registered
[ 0.228314] io scheduler deadline registered (default)
[ 0.229745] qcom-pcie 1b500000.pci: GPIO lookup for consumer perst
[ 0.229764] qcom-pcie 1b500000.pci: using device tree for GPIO lookup
[ 0.229785] of_get_named_gpiod_flags: can't parse 'perst-gpios'
property of node '/soc/pci@1b500000[0]'
[ 0.229812] of_get_named_gpiod_flags: parsed 'perst-gpio' property of
node '/soc/pci@1b500000[0]' - status (0)
[ 0.229883] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.229983] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.230072] 1b500000.pci supply vdda_refclk not found, using dummy
regulator
[ 0.260175] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.260200] pci_bus 0000:00: root bus resource [io 0xfe00000-0xfffff]
(bus address [0x1fc00000-0xfefffff])
[ 0.260217] pci_bus 0000:00: root bus resource [mem
0x08000000-0x0fdfffff]
[ 0.260236] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.260294] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.260452] pci 0000:00:00.0: supports D1
[ 0.260468] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.260836] PCI: bus0: Fast back to back transfers disabled
[ 0.261215] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.261428] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.262498] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.262955] PCI: bus1: Fast back to back transfers disabled
[ 0.262979] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.263156] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.263183] pci 0000:01:00.0: BAR 0: assigned [mem
0x08000000-0x081fffff 64bit]
[ 0.263300] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.263326] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.263871] aer 0000:00:00.0:pcie02: service driver aer loaded
[ 0.264186] qcom-pcie 1b700000.pci: GPIO lookup for consumer perst
[ 0.264203] qcom-pcie 1b700000.pci: using device tree for GPIO lookup
[ 0.264220] of_get_named_gpiod_flags: can't parse 'perst-gpios'
property of node '/soc/pci@1b700000[0]'
[ 0.264242] of_get_named_gpiod_flags: parsed 'perst-gpio' property of
node '/soc/pci@1b700000[0]' - status (0)
[ 0.264312] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.264409] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.264501] 1b700000.pci supply vdda_refclk not found, using dummy
regulator
[ 0.294614] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.294638] pci_bus 0001:00: root bus resource [io
0x31e10000-0xfffff] (bus address [0x63c00000-0x31eeffff])
[ 0.294654] pci_bus 0001:00: root bus resource [mem
0x2e000000-0x31dfffff]
[ 0.294671] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.294724] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.294858] pci 0001:00:00.0: supports D1
[ 0.294873] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.295216] PCI: bus0: Fast back to back transfers disabled
[ 0.295574] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.295781] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.296759] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.297212] PCI: bus1: Fast back to back transfers disabled
[ 0.297232] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.297474] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.297498] pci 0001:01:00.0: BAR 0: assigned [mem
0x2e000000-0x2e1fffff 64bit]
[ 0.297610] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.297631] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.298077] aer 0001:00:00.0:pcie02: service driver aer loaded
[ 0.298384] qcom-pcie 1b900000.pci: GPIO lookup for consumer perst
[ 0.298402] qcom-pcie 1b900000.pci: using device tree for GPIO lookup
[ 0.298420] of_get_named_gpiod_flags: can't parse 'perst-gpios'
property of node '/soc/pci@1b900000[0]'
[ 0.298441] of_get_named_gpiod_flags: parsed 'perst-gpio' property of
node '/soc/pci@1b900000[0]' - status (0)
[ 0.298513] 1b900000.pci supply vdda not found, using dummy regulator
[ 0.298606] 1b900000.pci supply vdda_phy not found, using dummy regulator
[ 0.298690] 1b900000.pci supply vdda_refclk not found, using dummy
regulator
[ 0.432115] qcom-pcie 1b900000.pci: link initialization failed
[ 0.433942] ------------[ cut here ]------------
[ 0.433973] WARNING: CPU: 0 PID: 1 at
drivers/clk/qcom/clk-branch.c:97 clk_branch_toggle+0x130/0x13c()
[ 0.433984] pcie2_phy_clk status stuck at 'on'
[ 0.433994] Modules linked in:
[ 0.434024] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.26 #5
[ 0.434065] [<c021e8ac>] (unwind_backtrace) from [<c021b608>]
(show_stack+0x10/0x14)
[ 0.434093] [<c021b608>] (show_stack) from [<c0387744>]
(dump_stack+0x84/0xc4)
[ 0.434122] [<c0387744>] (dump_stack) from [<c0226568>]
(warn_slowpath_common+0x6c/0x88)
[ 0.434142] [<c0226568>] (warn_slowpath_common) from [<c02265b4>]
(warn_slowpath_fmt+0x30/0x40)
[ 0.434166] [<c02265b4>] (warn_slowpath_fmt) from [<c0483194>]
(clk_branch_toggle+0x130/0x13c)
[ 0.434200] [<c0483194>] (clk_branch_toggle) from [<c047cbd8>]
(__clk_disable+0x4c/0x64)
[ 0.434228] [<c047cbd8>] (__clk_disable) from [<c047da9c>]
(clk_disable.part.1+0x18/0x24)
[ 0.434250] [<c047da9c>] (clk_disable.part.1) from [<c03d1f54>]
(qcom_pcie_disable_resources_v0+0x6c/0xb8)
[ 0.434270] [<c03d1f54>] (qcom_pcie_disable_resources_v0) from
[<c03d1a74>] (dw_pcie_host_init+0x5e0/0x680)
[ 0.434288] [<c03d1a74>] (dw_pcie_host_init) from [<c03d24e0>]
(qcom_pcie_probe+0x404/0x48c)
[ 0.434308] [<c03d24e0>] (qcom_pcie_probe) from [<c03fd9b4>]
(platform_drv_probe+0x44/0xac)
[ 0.434339] [<c03fd9b4>] (platform_drv_probe) from [<c03fc27c>]
(really_probe+0xd4/0x214)
[ 0.434361] [<c03fc27c>] (really_probe) from [<c03fc488>]
(__driver_attach+0x74/0x98)
[ 0.434382] [<c03fc488>] (__driver_attach) from [<c03faa58>]
(bus_for_each_dev+0x4c/0xa0)
[ 0.434404] [<c03faa58>] (bus_for_each_dev) from [<c03fbaa4>]
(bus_add_driver+0xd8/0x1f0)
[ 0.434426] [<c03fbaa4>] (bus_add_driver) from [<c03fcae4>]
(driver_register+0xa8/0xec)
[ 0.434458] [<c03fcae4>] (driver_register) from [<c0213718>]
(do_one_initcall+0x118/0x1f0)
[ 0.434483] [<c0213718>] (do_one_initcall) from [<c06eee7c>]
(kernel_init_freeable+0x130/0x1dc)
[ 0.434513] [<c06eee7c>] (kernel_init_freeable) from [<c020ceb8>]
(kernel_init+0x8/0xfc)
[ 0.434535] [<c020ceb8>] (kernel_init) from [<c0208e20>]
(ret_from_fork+0x14/0x34)
[ 0.434568] ---[ end trace fbd97ed824810f3a ]---
[ 0.434879] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00
[ 0.434902] pci_bus 0002:00: root bus resource [io
0x35e20000-0xfffff] (bus address [0x6bc00000-0x35edffff])
[ 0.434918] pci_bus 0002:00: root bus resource [mem
0x32000000-0x35dfffff]
[ 0.434937] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.434996] PCI: bus0: Fast back to back transfers enabled
[ 0.437821] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.439316] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.440402] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.440513] msm_serial 16340000.serial: uartclk = 1843200
[ 0.440593] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 184,
base_baud = 115200) is a MSM
[ 0.440655] msm_serial: console setup on port #0
[ 1.345164] console [ttyMSM0] enabled
[ 1.349974] msm_serial: driver initialized
[ 1.356078] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 1.357210] nand: AMD/Spansion S34MS01G2
[ 1.363817] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[ 1.367630] Scanning device for bad blocks
[ 1.814132] random: nonblocking pool is initialized
[ 2.131491] 18 ofpart partitions found on MTD device qcom-nandc
[ 2.131526] Creating 18 MTD partitions on "qcom-nandc":
[ 2.136332] 0x000000000000-0x000000040000 : "SBL1"
[ 2.142573] 0x000000040000-0x000000180000 : "MIBIB"
[ 2.147199] 0x000000180000-0x0000002c0000 : "SBL2"
[ 2.151981] 0x0000002c0000-0x000000540000 : "SBL3"
[ 2.156922] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 2.161609] 0x000000660000-0x000000780000 : "SSD"
[ 2.166790] 0x000000780000-0x000000a00000 : "TZ"
[ 2.171631] 0x000000a00000-0x000000c80000 : "RPM"
[ 2.176356] 0x000000c80000-0x000000dc0000 : "art"
[ 2.180871] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 2.185656] 0x000000ec0000-0x000000f00000 : "u_env"
[ 2.190588] 0x000000f00000-0x000000f40000 : "s_env"
[ 2.195266] 0x000000f40000-0x000000f80000 : "devinfo"
[ 2.200064] 0x000000f80000-0x000003780000 : "kernel1"
[ 2.205409] 0x000001280000-0x000003780000 : "rootfs1"
[ 2.210361] 0x000003780000-0x000005f80000 : "kernel2"
[ 2.215464] 0x000003a80000-0x000005f80000 : "ubi"
[ 2.220387] 0x000005f80000-0x000008000000 : "syscfg"
[ 2.226162] libphy: Fixed MDIO Bus: probed
[ 2.229491] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/soc/mdio[0]' - status (0)
[ 2.229517] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/soc/mdio[1]' - status (0)
[ 2.229538] of_get_named_gpiod_flags: can't parse 'gpios' property of
node '/soc/mdio[2]'
[ 2.229683] libphy: GPIO Bitbanged MDIO: probed
[ 2.254349] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 2.472118] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.472146] Ring mode enabled
[ 2.476251] DMA HW capability register supported
[ 2.479098] Enhanced/Alternate descriptors
[ 2.483871] Enabled extended descriptors
[ 2.487865] RX Checksum Offload Engine supported (type 2)
[ 2.492032] TX Checksum insertion supported
[ 2.497480] Wake-Up On Lan supported
[ 2.501921] Enable RX Mitigation via HW Watchdog Timer
[ 2.507060] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.510436] Ring mode enabled
[ 2.515741] DMA HW capability register supported
[ 2.518593] Enhanced/Alternate descriptors
[ 2.523367] Enabled extended descriptors
[ 2.527360] RX Checksum Offload Engine supported (type 2)
[ 2.531529] TX Checksum insertion supported
[ 2.536999] Wake-Up On Lan supported
[ 2.541403] Enable RX Mitigation via HW Watchdog Timer
[ 2.545763] i2c /dev entries driver
[ 2.551188] Speed bin: 0
[ 2.553496] PVS bin: 1
[ 2.556652] platform cpufreq-krait.0: Driver cpufreq-krait requests
probe deferral
[ 2.560418] L2 @ QSB rate. Forcing new rate.
[ 2.566244] L2 @ 387500 KHz
[ 2.570471] CPU0 @ 800000 KHz
[ 2.572930] CPU1 @ QSB rate. Forcing new rate.
[ 2.576062] CPU1 @ 384000 KHz
[ 2.580752] TCP: cubic registered
[ 2.584370] NET: Registered protocol family 10
[ 2.588186] NET: Registered protocol family 17
[ 2.591073] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.595560] 8021q: 802.1Q VLAN Support v1.8
[ 2.608361] Registering SWP/SWPB emulation handler
[ 2.621139] UBI: auto-attach mtd16
[ 2.621160] UBI: attaching mtd16 to ubi0
[ 2.996860] UBI: scanning is finished
[ 3.011916] UBI: attached mtd16 (name "ubi", size 37 MiB) to ubi0
[ 3.011941] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.017063] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.023806] UBI: VID header offset: 2048 (aligned 2048), data offset:
4096
[ 3.030523] UBI: good PEBs: 296, bad PEBs: 0, corrupted PEBs: 0
[ 3.037272] UBI: user volume: 2, internal volumes: 1, max. volumes
count: 128
[ 3.043081] UBI: max/mean erase counter: 3/2, WL threshold: 4096,
image sequence number: 1517402195
[ 3.050319] UBI: available PEBs: 0, total reserved PEBs: 296, PEBs
reserved for bad PEB handling: 20
[ 3.059389] UBI: background thread "ubi_bgt0d" started, PID 44
[ 3.060304] UBI: ubiblock0_0 created from ubi0:0(rootfs)
[ 3.060308] ubiblock: device ubiblock0_0 (rootfs) set to be root
filesystem
[ 3.060322] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 3.061079] device-tree: Duplicate name in testcase-data, renamed to
"duplicate-name#1"
[ 3.061924] ### dt-test ### start of selftest - you will see error
messages
[ 3.062326] /testcase-data/phandle-tests/consumer-a: could not get
#phandle-cells-missing for /testcase-data/phandle-tests/provider1
[ 3.062330] /testcase-data/phandle-tests/consumer-a: could not get
#phandle-cells-missing for /testcase-data/phandle-tests/provider1
[ 3.062338] /testcase-data/phandle-tests/consumer-a: could not find
phandle
[ 3.062346] /testcase-data/phandle-tests/consumer-a: could not find
phandle
[ 3.062351] /testcase-data/phandle-tests/consumer-a: arguments longer
than property
[ 3.062357] /testcase-data/phandle-tests/consumer-a: arguments longer
than property
[ 3.062945] irq: no irq domain found for
/testcase-data/interrupts/intc0 !
[ 3.063991] ### dt-test ### end of selftest - 115 passed, 0 failed
[ 3.171063] VFS: Mounted root (squashfs filesystem) readonly on
device 254:0.
[ 3.173811] Freeing unused kernel memory: 192K (c06ee000 - c071e000)
[ 3.721234] init: Console is alive
[ 3.721360] init: - watchdog -
[ 4.541365] usbcore: registered new interface driver usbfs
[ 4.541436] usbcore: registered new interface driver hub
[ 4.545909] usbcore: registered new device driver usb
[ 4.557716] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-keys/wifi[0]' - status (0)
[ 4.557736] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-keys/reset[0]' - status (0)
[ 4.557751] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-keys/wps[0]' - status (0)
[ 4.557898] genirq: Threaded irq requested with handler=NULL and
!ONESHOT for irq 355
[ 4.557987] gpio-keys gpio-keys: failed to request irq:355 for gpio:67
[ 4.564841] genirq: Threaded irq requested with handler=NULL and
!ONESHOT for irq 356
[ 4.571159] gpio-keys gpio-keys: failed to request irq:356 for gpio:68
[ 4.579170] genirq: Threaded irq requested with handler=NULL and
!ONESHOT for irq 353
[ 4.585575] gpio-keys gpio-keys: failed to request irq:353 for gpio:65
[ 4.595938] SCSI subsystem initialized
[ 4.602500] libata version 3.00 loaded.
[ 4.604735] ahci 29000000.sata: forcing PORTS_IMPL to 0x1
[ 4.604788] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6
Gbps 0x1 impl platform mode
[ 4.609114] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp
pio slum part ccc apst
[ 4.618365] scsi host0: ahci_platform
[ 4.626075] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f]
port 0x100 irq 241
[ 4.972723] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.974512] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.977533] ehci-platform: EHCI generic platform driver
[ 4.986273] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.989103] ohci-platform: OHCI generic platform driver
[ 5.491133] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.491180] xhci-hcd xhci-hcd.0.auto: new USB bus registered,
assigned bus number 1
[ 5.495790] xhci-hcd xhci-hcd.0.auto: irq 142, io mem 0x11000000
[ 5.503686] hub 1-0:1.0: USB hub found
[ 5.509340] hub 1-0:1.0: 1 port detected
[ 5.513180] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.516955] xhci-hcd xhci-hcd.0.auto: new USB bus registered,
assigned bus number 2
[ 5.522807] hub 2-0:1.0: USB hub found
[ 5.529815] hub 2-0:1.0: 1 port detected
[ 5.533956] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.537710] xhci-hcd xhci-hcd.1.auto: new USB bus registered,
assigned bus number 3
[ 5.543244] xhci-hcd xhci-hcd.1.auto: irq 237, io mem 0x10000000
[ 5.550992] hub 3-0:1.0: USB hub found
[ 5.556861] hub 3-0:1.0: 1 port detected
[ 5.560562] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.564502] xhci-hcd xhci-hcd.1.auto: new USB bus registered,
assigned bus number 4
[ 5.570216] hub 4-0:1.0: USB hub found
[ 5.577354] hub 4-0:1.0: 1 port detected
[ 5.581928] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/wps[0]' - status (0)
[ 5.581941] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/power[0]' - status (0)
[ 5.581952] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/wifi[0]' - status (0)
[ 5.581965] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/wps[0]' - status (0)
[ 5.582061] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/power[0]' - status (0)
[ 5.582134] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/gpio-leds/wifi[0]' - status (0)
[ 5.583619] usbcore: registered new interface driver usb-storage
[ 5.743345] init: - preinit -
[ 9.218507] UBIFS: background thread "ubifs_bgt0_1" started, PID 81
[ 9.352817] UBIFS: recovery needed
[ 9.543046] UBIFS: recovery completed
[ 9.543158] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 9.545828] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O
unit sizes: 2048 bytes/2048 bytes
[ 9.552169] UBIFS: FS size: 12951552 bytes (12 MiB, 102 LEBs),
journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 9.561425] UBIFS: reserved for root: 611733 bytes (597 KiB)
[ 9.570876] UBIFS: media format: w4/r0 (latest is w4/r0), UUID
04F095CF-14F0-454E-ABCB-3C9ABB91DB4F, small LPT model
[ 9.583292] mount_root: switching to jffs2 overlay
[ 9.951259] procd: - early -
[ 9.951321] procd: - watchdog -
[ 10.605817] procd: - ubus -
[ 11.645716] procd: - init -
[ 12.150493] ntfs: driver 2.1.31 [Flags: R/O MODULE].
[ 12.153531] tun: Universal TUN/TAP device driver, 1.6
[ 12.154518] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 12.163300] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.171856] Loading modules backported from Linux version
v4.4-rc5-1913-gc8fdf68
[ 12.171882] Backport generated by backports.git
backports-20151218-0-g2f58d9d
[ 12.194478] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 12.195227] ath10k_pci 0000:01:00.0: pci irq msi interrupts 1
irq_mode 0 reset_mode 0
[ 12.496257] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000
chip_id 0x003b01ff sub 168c:0002
[ 12.496295] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1
tracing 0 dfs 1 testmode 1
[ 12.505943] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api
5 features no-p2p crc32 d2901e01
[ 14.552433] ath10k_pci 0000:01:00.0: unable to read from the device
[ 14.552460] ath10k_pci 0000:01:00.0: could not execute otp for board
id check: -110
[ 14.557502] ath10k_pci 0000:01:00.0: failed to get board id from otp:
-110
[ 14.557502] , ignored
[ 14.565674] ath10k_pci 0000:01:00.0: failed to fetch board data for
bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002
from ath10k/QCA99X0/hw2.0/board-2.bin
[ 14.584024] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A
crc32 7e56fd07
[ 15.978250] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4
cal file max-sta 512 raw 0 hwcrypto 1
[ 16.035623] ath: EEPROM regdomain: 0x0
[ 16.035630] ath: EEPROM indicates default country code should be used
[ 16.035636] ath: doing EEPROM country->regdmn map search
[ 16.035644] ath: country maps to regdmn code: 0x3a
[ 16.035651] ath: Country alpha2 being used: US
[ 16.035657] ath: Regpair used: 0x3a
[ 16.039332] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 16.040106] ath10k_pci 0001:01:00.0: pci irq msi interrupts 1
irq_mode 0 reset_mode 0
[ 16.175838] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000
chip_id 0x003b01ff sub 168c:0002
[ 16.175874] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1
tracing 0 dfs 1 testmode 1
[ 16.185739] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api
5 features no-p2p crc32 d2901e01
[ 18.232442] ath10k_pci 0001:01:00.0: unable to read from the device
[ 18.232468] ath10k_pci 0001:01:00.0: could not execute otp for board
id check: -110
[ 18.237510] ath10k_pci 0001:01:00.0: failed to get board id from otp:
-110
[ 18.237510] , ignored
[ 18.245347] ath10k_pci 0001:01:00.0: failed to fetch board data for
bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002
from ath10k/QCA99X0/hw2.0/board-2.bin
[ 18.254712] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A
crc32 7e56fd07
[ 19.653687] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4
cal file max-sta 512 raw 0 hwcrypto 1
[ 19.716178] ath: EEPROM regdomain: 0x0
[ 19.716186] ath: EEPROM indicates default country code should be used
[ 19.716193] ath: doing EEPROM country->regdmn map search
[ 19.716202] ath: country maps to regdmn code: 0x3a
[ 19.716209] ath: Country alpha2 being used: US
[ 19.716215] ath: Regpair used: 0x3a
[ 19.724461] u32 classifier
[ 19.724481] input device check on
[ 19.726054] Actions configured
[ 19.730701] Mirror/redirect action on
[ 19.736119] nf_conntrack version 0.5.0 (7523 buckets, 30092 max)
[ 19.739611] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.824663] usbcore: registered new interface driver ums-alauda
[ 19.825346] usbcore: registered new interface driver ums-cypress
[ 19.830068] usbcore: registered new interface driver ums-datafab
[ 19.836357] usbcore: registered new interface driver ums-freecom
[ 19.842383] usbcore: registered new interface driver ums-isd200
[ 19.848303] usbcore: registered new interface driver ums-jumpshot
[ 19.853992] usbcore: registered new interface driver ums-karma
[ 19.860325] usbcore: registered new interface driver ums-sddr09
[ 19.866016] usbcore: registered new interface driver ums-sddr55
[ 19.871818] usbcore: registered new interface driver ums-usbat
[ 19.889070] xt_time: kernel timezone is -0000
[ 19.893315] PPP generic driver version 2.4.2
[ 19.894029] NET: Registered protocol family 24
[ 22.945241] eth0: device MAC address 00:06:3b:01:41:00
[ 22.960202] device eth0.1 entered promiscuous mode
[ 22.960226] device eth0 entered promiscuous mode
[ 22.967086] br-lan: port 1(eth0.1) entered forwarding state
[ 22.968679] br-lan: port 1(eth0.1) entered forwarding state
[ 24.942486] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up -
1Gbps/Full - flow control off
[ 24.962260] br-lan: port 1(eth0.1) entered forwarding state
On 03/04/16 06:05, Imre Kaloz wrote:
Hi Adrian,
On Sat, 02 Apr 2016 01:48:22 +0200, Adrian Panella <ianch...@outlook.com>
wrote:
Hi Imre,
networking seems to be working for me.
So far I have done only basic testing. Can access the router from lan
and wlan.
No permormance test done, though.
If you have a repo you can share with your patchset, I could gladly
compare to take advantage of both works.
I'll have time for this today, but the weird part is that comparing
the dts I made and the one you submitted I see no difference when it
comes to ethernet configuration.
Could you post your dmesg and the contents of the devinfo partition?
Thanks,
Imre
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
