On 17/03/16 14:00, Phil Armstrong wrote:
15.05.1 certainly seems to have bricked my DGND3700v1. A TTL serial<->USB adaptor is in the post to see if I can resurrect it. cheers, Phil
OK. After some prodding with an ADAfruit FTDI adaptor (works fine on an rPI, but I get no RX from the board on the DGND3700v1. Hammering on various keys seems to put it in rescue mode though, so TX must be sort of working & I can flash a new image via tftp!) I have resurrected this router.
Having flashed a few images, I can confirm that 15.05.1 fails to boot, but both OpenWRT trunk as of today boots fine & the original Chaos Calmer 15.05 image boot fine.
Should I try a build from the head of the 15.05 branch? I haven’t wrestled with the OpenWRT build system as of yet but I’m willing to give it a go.
Unfortunately I don’t have any logs at all from the failed boot as (see above) I can’t get any output from the bootloader over the serial cable. Any hints on this appreciated.
cheers, Phil
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
