Date: Fri, 18 Mar 2016 00:00:03 +0100 Subject: [PATCH 0/2] Netgear WNR1000v2: improved support
Hi all, Two patches following this email make all LEDs and buttons on WNR1000v2 accessible to OS. Default configuration is provided so all router's LEDs and buttons are enabled and work as expected without need of further customization - which still is possible via standard /sys/class/leds interface. Local Ethernet ports (LAN1-4) LEDs show speed link as described on device label. This device is very similar to WNR2000v3 and WNR612v2, so large parts of code are shared between these Netgear routers. For example, this router is affected by 'invalid WLAN MAC' issue and therefore standard WNR2000v3 workaround has been used. Tested successfully on WNR1000v2h2. Michal Cieslakiewicz (2): ar71xx: WNR1000v2: fix for random WLAN MAC ar71xx: WNR1000v2: enable control of all LEDs and buttons target/linux/ar71xx/base-files/etc/board.d/01_leds | 3 +- .../ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c | 141 ++++++++++++++++++++- 2 files changed, 136 insertions(+), 8 deletions(-) -- 2.7.3 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
