Hi Arend, could you or someone else from Broadcom pleases add the firmware for the BCM43430 SDIO to linux-firmware. This module is used in the Raspberry Pi 3 and it would be a lot easer for distributions to have the firmware in linux-firmware.
Hauke On 03/08/2016 11:13 PM, Álvaro Fernández Rojas wrote: > I've got WiFi and Bluetooth working: > https://github.com/openwrt-es/openwrt/commits/brcm2708-rpi3-wifi > https://github.com/openwrt-es/openwrt/commits/brcm2708-rpi3-bt > > WiFi is working after latest brcmfmac patches backported by Rafał, with > some issues like the following: > brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet received, > flags 0x44 > > BT is working but only for baud rates <= 115200. I'm still investigating > why. > In order to setup the bluetooth, the following bluez patches are needed: > https://github.com/openwrt/packages/pull/2464 > > By the way, I won't be submitting any WiFi/BT patches until anyone from > either the Raspberry foundation or Broadcom clarifies the license of the > firmware files. > https://github.com/raspberrypi/linux/issues/1325 > > Regards, > Álvaro. > > El 04/03/2016 a las 21:06, Álvaro Fernández Rojas escribió: >> These patches add basic Raspberry Pi 3 support. >> >> Bootlog: >> https://gist.github.com/Noltari/92f51259c9d18506192b#file-bcm2710_rpi3-log >> >> >> Known issues: >> 1) No ARMv8 64 bit support. >> More info: >> https://github.com/raspberrypi/firmware/issues/550 >> 2) UART0 is connected to BCM43430 (Bluetooth), which means that >> console relies on UART1. >> UART1 clock depends on pll_freq, which changes depending on the core >> frequency. >> In order to get a proper console through GPIOs 14 & 15, you should >> force a fixed frequency instead of the default dynamic one. >> You can do that by either setting core_freq=250 on config.txt or >> force_turbo=1 (this last option will run your rpi at maximum frequency >> so be careful). >> The framebuffer console (HDMI) isn't affected so you can use that >> one with an external keyboard and USB HID package. >> More info: >> https://github.com/raspberrypi/firmware/issues/553 >> https://github.com/RPi-Distro/repo/issues/22 >> 3) No WiFi support. >> brcmfmac43430-sdio.bin / brcmfmac43430-sdio.txt firmware files >> aren't available on linux-firmware for now. >> Downloading those files from >> https://github.com/RPi-Distro/firmware-nonfree and trying to enable >> BCM43430 SDIO WiFi causes the following kernel exception: >> >> https://gist.github.com/Noltari/92f51259c9d18506192b#file-bcm2710_rpi3_brcmfmac-log >> >> 4) No Bluetooth support. >> _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
