2016-02-26 15:35 skrev Felix Fietkau:
On 2016-02-26 15:27, micke.prag@telldus.sewrote:
Hi I have a board config for a device that I am about to commit to
OpenWRT. I am rebasing my work against trunk but some things have
changed since I made the config. My code was written against r46120
but
somethings doesn't work on r48800. My question is how I should
update
my code to "proper OpenWRT standard"? First, network. The board has
only one network port (it is not a router). This should be
configured
using DHCP. The board also has Wifi and should be configured as a
client but disabled as default. In -r46120 I put this in
/etc/uci-defaults/02_network: ucidef_set_interface_raw "lan" "eth0"
"dhcp" ucidef_set_interface_raw "wlan" "wlan0" "dhcp" uci batch
<<EOF
set network.lan.hostname='TellStick-ZNet-Lite' set
wireless.radio0.disabled=0 set
wireless.@wifi-iface[0].network='wlan'
set wireless.@wifi-iface[0].mode='sta' set
wireless.@wifi-iface[0].encryption=psk2 EOF uci commit wireless In
r48800 this file seems to have been replaced by
/etc/board.d/02_network
instead. Unfortunately "raw" uci commands does not work since its
generating /etc/board.json instead? Am I correct? If I do this then
"dhcp" is ignored and the interface is set to static anyway:
ucidef_set_interface_lan "eth0" "dhcp" How to convert the wireless
and
the hostname I have no idea? Next is led. I had this in
/etc/uci-defaults/02_network: ucidef_set_led_netdev "lan_act"
"LANACT"
"tellstick:green:lan" "eth0" ucidef_set_led_netdev "lan_link"
"LANLINK"
"tellstick:orange:lan" "eth0" uci set system.led_lan_act.mode='tx
rx'
uci set system.led_lan_link.mode='link' The first two lines work in
r48800 but how do I convert the last two lines? How do I set the
mode?
To change the defaults, you shouldn't just modify the existing files.
You can simply create a new file in /etc/uci-defaults which runs your
uci batch command as usual. It will run after /etc/board.d has been
processed and the default config has been generated, so you should be
able to override any parameter you want.
The file /etc/uci-defaults/02_network was (re)moved in r47534. Is it
really the right way to go to reintroduce this file again?
My thougs was that this should be implemented in /etc/board.json
instead, maybe I was wrong?
Please note that my goal is to have the board config sent upstream, not
only for my local build.
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
