Hi,
i cant merge this without a correct patch for trunk.
John
On 08/02/2016 15:27, Sven Roederer wrote:
> The hardware of the v3 is identical to the v2.
>
> - adding support for WR1043v3
> - resending this patch after fixing the original from
> https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039488.html
> - adds support via old-style-definition. So less code is changed and there is
> less potential to break other projects.
> - based on
> https://github.com/freifunk-gluon/gluon/blob/master/patches/openwrt/0037-ar71xx-add-support-for-TP-Link-TL-WR1043ND-v3.patch
> - also update Kconfig for this board
>
> Signed-off-by: Sven Roederer <devel-s...@geroedel.de>
> ---
> target/linux/ar71xx/image/Makefile | 3
> ++-
> target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch | 2 +-
> 2 files changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/target/linux/ar71xx/image/Makefile
> b/target/linux/ar71xx/image/Makefile
> index 4336697..61e62cd 100644
> --- a/target/linux/ar71xx/image/Makefile
> +++ b/target/linux/ar71xx/image/Makefile
> @@ -2007,6 +2007,7 @@ $(eval $(call
> SingleProfile,TPLINK,64kraw,TLWR941NV4,tl-wr941nd-v4,TL-WR741ND,tt
> $(eval $(call
> SingleProfile,TPLINK,64kraw,TLWR1043V1,tl-wr1043nd-v1,TL-WR1043ND,ttyS0,115200,0x10430001,1,8M))
>
> $(eval $(call
> SingleProfile,TPLINK-LZMA,64kraw,TLWR1043V2,tl-wr1043nd-v2,TL-WR1043ND-v2,ttyS0,115200,0x10430002,1,8M))
> +$(eval $(call
> SingleProfile,TPLINK-LZMA,64kraw,TLWR1043V3,tl-wr1043nd-v3,TL-WR1043ND-v2,ttyS0,115200,0x10430003,1,8M))
> $(eval $(call
> SingleProfile,TPLINK-LZMA,64kraw,TLWR2543,tl-wr2543-v1,TL-WR2543N,ttyS0,115200,0x25430001,1,8Mlzma,-v
> 3.13.99))
>
> $(eval $(call
> SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
> @@ -2071,7 +2072,7 @@ $(eval $(call MultiProfile,TLWR743,TLWR743NV1))
> $(eval $(call MultiProfile,TLWR841,TLWR841NV15 TLWR841NV3 TLWR841NV5
> TLWR841NV7))
> $(eval $(call MultiProfile,TLWR842,TLWR842V1))
> $(eval $(call MultiProfile,TLWR941,TLWR941NV2 TLWR941NV3 TLWR941NV4))
> -$(eval $(call MultiProfile,TLWR1043,TLWR1043V1 TLWR1043V2))
> +$(eval $(call MultiProfile,TLWR1043,TLWR1043V1 TLWR1043V2 TLWR1043V3))
> $(eval $(call MultiProfile,TLWDR4300,TLWDR3500V1 TLWDR3600V1 TLWDR4300V1
> TLWDR4300V1IL TLWDR4310V1 MW4530RV1))
> $(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M))
> $(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71
> UBNTBULLETM UBNTROCKETM UBNTROCKETMXW UBNTNANOM UBNTNANOMXW UBNTLOCOXW
> UBNTUNIFI UBNTUNIFIOUTDOOR UBNTUNIFIOUTDOORPLUS UAPPRO UBNTAIRGW))
> diff --git
> a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
> b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
> index 2fa041b..ca1b194 100644
> --- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
> +++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
> @@ -1268,7 +1268,7 @@
> + select ATH79_DEV_WMAC
> +
> +config ATH79_MACH_TL_WR1043ND_V2
> -+ bool "TP-LINK TL-WR1043ND v2 support"
> ++ bool "TP-LINK TL-WR1043ND v2/v3 support"
> + select SOC_QCA955X
> + select ATH79_DEV_ETH
> + select ATH79_DEV_GPIO_BUTTONS
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
