Signed-off-by: Tiziano Bacocco <tizb...@gmail.com>
---
.../linux/ar71xx/base-files/etc/board.d/02_network | 3 +-
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
target/linux/ar71xx/config-4.1 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 9 +-
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../files/arch/mips/ath79/mach-tl-wa801nd-v3.c | 136 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 3 +-
target/linux/ar71xx/image/Makefile | 9 +-
tools/firmware-utils/src/mktplinkfw.c | 7 +-
9 files changed, 167 insertions(+), 5 deletions(-)
create mode 100644
target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 51a1b64..e12367c 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -370,7 +370,8 @@ cap324)
ucidef_set_interface_lan "eth0" "dhcp"
;;
-arduino-yun | \
+arduino-yun |\
+tl-wa801nd-v3 |\
dir-505-a1)
ucidef_set_interface_lan "eth1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 34d5741..e5b7fec 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -824,6 +824,9 @@ ar71xx_board_detect() {
*"TL-WA801ND v2")
name="tl-wa801nd-v2"
;;
+ *"TL-WA801ND v3")
+ name="tl-wa801nd-v3"
+ ;;
*TL-WA901ND)
name="tl-wa901nd"
;;
diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
index fe1dd68..627ae5d 100644
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
@@ -134,6 +134,7 @@ CONFIG_ATH79_MACH_TL_MR3020=y
CONFIG_ATH79_MACH_TL_MR3X20=y
CONFIG_ATH79_MACH_TL_WA701ND_V2=y
CONFIG_ATH79_MACH_TL_WA7210N_V2=y
+CONFIG_ATH79_MACH_TL_WA801ND_V3=y
CONFIG_ATH79_MACH_TL_WA830RE_V2=y
CONFIG_ATH79_MACH_TL_WA901ND=y
CONFIG_ATH79_MACH_TL_WA901ND_V2=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index da26414..069d338 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1090,7 +1090,14 @@ config ATH79_MACH_TL_WA7210N_V2
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
-
+config ATH79_MACH_TL_WA801ND_V3
+ bool "TP-LINK TL-WA801ND v3 support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
config ATH79_MACH_TL_WA830RE_V2
bool "TP-LINK TL-WA830RE v2 support"
select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 991f6f2..ac82a63 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -143,6 +143,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o
obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3) += mach-tl-wa801nd-v3.o
obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2) += mach-tl-wdr3320-v2.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c
new file mode 100644
index 0000000..39cdb10
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c
@@ -0,0 +1,136 @@
+/*
+ * TP-LINK TL-WA801ND v3 adapted from TP-LINK TL-WR841N/ND v9
+ *
+ * Copyright (C) 2014 Matthias Schiffer <mschif...@universe-factory.net>
+ * Copyright (C) 2016 Tiziano Bacocco <tizb...@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WA801NDV3_GPIO_LED_WLAN 12
+#define TL_WA801NDV3_GPIO_LED_QSS 13
+#define TL_WA801NDV3_GPIO_LED_SECURITY_RED 11
+#define TL_WA801NDV3_GPIO_LED_SECURITY_GREEN 15
+#define TL_WA801NDV3_GPIO_LED_LAN 3
+
+#define TL_WA801NDV3_GPIO_BTN_RESET 2
+#define TL_WA801NDV3_GPIO_BTN_WIFI 1
+
+#define TL_WA801NDV3_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL (3 *
TL_WA801NDV3_KEYS_POLL_INTERVAL)
+
+static const char *tl_wa801n_v3_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wa801n_v3_flash_data = {
+ .part_probes = tl_wa801n_v3_part_probes,
+};
+
+static struct gpio_led tl_wa801n_v3_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WA801NDV3_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan",
+ .gpio = TL_WA801NDV3_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WA801NDV3_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:red:security",
+ .gpio = TL_WA801NDV3_GPIO_LED_SECURITY_RED,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:security",
+ .gpio = TL_WA801NDV3_GPIO_LED_SECURITY_GREEN,
+ .active_low = 0,
+ }
+
+};
+
+static struct gpio_keys_button tl_wa801n_v3_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA801NDV3_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "WIFI button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA801NDV3_GPIO_BTN_WIFI,
+ .active_low = 1,
+ }
+};
+
+
+static void __init tl_ap143_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(&tl_wa801n_v3_flash_data);
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_eth(1);
+
+ /* WAN */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ ath79_init_mac(tmpmac, mac, 0);
+ ath79_register_wmac(ee, tmpmac);
+}
+
+static void __init tl_wa801n_v3_setup(void)
+{
+ tl_ap143_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801n_v3_leds_gpio),
+ tl_wa801n_v3_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TL_WA801NDV3_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa801n_v3_gpio_keys),
+ tl_wa801n_v3_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA801ND_V3, "TL-WA801ND-v3", "TP-LINK TL-WA801ND
v3",
+ tl_wa801n_v3_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index a170e8d..967a012 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -161,12 +161,13 @@ enum ath79_mach_type {
ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */
ATH79_MACH_TL_WA701ND_V2, /* TP-LINK TL-WA701ND v2 */
ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */
- ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */
+ ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */
ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/
ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */
ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */
ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */
ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */
+ ATH79_MACH_TL_WA801ND_V3, /* TP-LINK TL-WA801ND v3 */
ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */
diff --git a/target/linux/ar71xx/image/Makefile
b/target/linux/ar71xx/image/Makefile
index 080d960..8a5c528 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -984,6 +984,13 @@ define Device/tl-wa801nd-v2
TPLINK_HWID := 0x08010002
endef
+define Device/tl-wa801nd-v3
+ $(Device/tplink-4mlzma)
+ BOARDNAME := TL-WA801ND-v3
+ DEVICE_PROFILE := TLWA801
+ TPLINK_HWID := 0x08010003
+endef
+
define Device/tl-wa830re-v1
$(Device/tplink-4m)
BOARDNAME := TL-WA901ND
@@ -1011,7 +1018,7 @@ define Device/tl-wa860re-v1
DEVICE_PROFILE := TLWA860
TPLINK_HWID := 0x08600001
endef
-TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa830re-v1 tl-wa830re-v2
tl-wa850re-v1 tl-wa860re-v1
+TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1
tl-wa830re-v2 tl-wa850re-v1 tl-wa860re-v1
define Device/tl-wa901nd-v1
$(Device/tplink-4m)
diff --git a/tools/firmware-utils/src/mktplinkfw.c
b/tools/firmware-utils/src/mktplinkfw.c
index 085eb4c..9fd5e38 100644
--- a/tools/firmware-utils/src/mktplinkfw.c
+++ b/tools/firmware-utils/src/mktplinkfw.c
@@ -51,6 +51,7 @@
#define HWID_TL_WA830RE_V1 0x08300010
#define HWID_TL_WA830RE_V2 0x08300002
#define HWID_TL_WA801ND_V2 0x08010002
+#define HWID_TL_WA801ND_V3 0x08010003
#define HWID_TL_WA901ND_V1 0x09010001
#define HWID_TL_WA901ND_V2 0x09010002
#define HWID_TL_WDR4300_V1_IL 0x43008001
@@ -298,6 +299,11 @@ static struct board_info boards[] = {
.hw_id = HWID_TL_WA801ND_V2,
.hw_rev = 1,
.layout_id = "4Mlzma",
+ },{
+ .id =
"TL-WA801NDv3",
+ .hw_id = HWID_TL_WA801ND_V3,
+ .hw_rev = 1,
+ .layout_id = "4Mlzma",
}, {
.id = "TL-WA901NDv1",
.hw_id = HWID_TL_WA901ND_V1,
@@ -1219,4 +1225,3 @@ int main(int argc, char *argv[])
out:
return ret;
}
-
--
2.7.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
