Hi Felix, thanks for the hint. Did you configure the MAC in the interface section? I suggest I had a wrongly created MAC on my first tries which resulted in kernel not accepting it.
Kind regards, André Am 28.01.2016 um 23:35 schrieb Felix Fietkau: > On 2016-01-24 20:47, André Valentin wrote: >> There are cases where you need a different MAC on a VLAN interface, i.e. if >> if have move than one connection to a switch. A later change of the MAC >> is not possible on VLAN interfaces, so it has to be done on creation. >> The new macaddr option allows to set a unique MAC for a VLAN interface. >> Example: >> config device 'testvl' >> option type '8021ad' >> option name 'testvl' >> option ifname 'eth0' >> option vid '106' >> option macaddr 'f2:48:00:89:45:4c' >> >> config interface 'testif' >> option ifname 'testvl' >> option proto 'none' >> option auto '1' >> >> Signed-off-by: André Valentin <avalen...@marcant.net> > I don't see the point of this patch - I just tried your example config, > and it works just fine without it ;) > > - Felix > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
