Hello John, Of course this has been over a year since I submitted ( http://patchwork.ozlabs.org/patch/419857/ ); however I remember in one of our e-mail threads that you ( or Felix? ) thought it was possible to pull the correct pll_1000 value from the bootloader? Is that still a possibility?
If you could somehow acquire the correct value directly from the boot args; that would seem ideal. -- Davey On Wed, Jan 27, 2016 at 9:27 AM, John Crispin <blo...@openwrt.org> wrote: > > > On 27/01/2016 17:03, Anton Kalmykov wrote: >> >> Hi, 951G owners! >> I have RB951G-2HnD device with AR9344 rev 3. It is configured like that: >> - Balanced 2 WAN ports (mwan3) >> - ipsec LAN-to-LAN >> - OpenVPN server >> - about 30 clients (wi-fi, lan) >> >> My results for different ath79_eth0_pll_data.pll_1000 values: >> >> 0x3e000000 - it worked fine with Barrier Breaker, but sometimes (one or >> two times per day) it was restarting suddenly. It was happening after I >> have configured mwan3. >> 0x06000000 - it works wonderful with Chaos Calmer. The configuration is > > so the conensus is that 0x06000000 is correct ? > > John > > > >> the same. No problem with reboot. So, I would recommend this value. >> unpatched - of course it doesn't work. :-) >> >> If it's useful, please add this information to wiki-page: >> https://wiki.openwrt.org/toh/mikrotik/rb2011uias#tracking_reported_experience_with_suggested_patch_for_the_5_gige_ports >> >> >> -- >> Anton >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
