please do that.
On 19/01/2016 09:38, Tathagata Das wrote: > Do you mean to say that I have to prepare the patch against latest code of > trunk and send that it again? > > Regards, > Tathagata > > > -----Original Message----- > From: John Crispin [mailto:blo...@openwrt.org] > Sent: 19 January 2016 14:07 > To: Tathagata Das; openwrt-devel@lists.openwrt.org > Subject: Re: [OpenWrt-Devel] [PATCH] Add support for Netgear D7800 > > you patch collides with f177c2c2f956c938045bd53943e3f1c090b5db2b so you will > have to rebase/send it. > > > > On 19/01/2016 09:26, Tathagata Das wrote: >> Hi John, >> >> I sent the patch last time using git command and I even received an >> email from OpenWRT on 12th January 2016. >> >> Regards, >> Tathagata >> >> >> -----Original Message----- >> From: John Crispin [mailto:blo...@openwrt.org] >> Sent: 19 January 2016 13:45 >> To: Tathagata Das; openwrt-devel@lists.openwrt.org >> Subject: Re: [OpenWrt-Devel] [PATCH] Add support for Netgear D7800 >> >> same as before, we are waiting on you to send a version that applies. >> >> >> patchwork 566597 >> --2016-01-17 06:23:22-- >> http://patchwork.ozlabs.org/patch/566597/mbox/ >> Resolving patchwork.ozlabs.org (patchwork.ozlabs.org)... 103.22.144.67 >> Connecting to patchwork.ozlabs.org >> (patchwork.ozlabs.org)|103.22.144.67|:80... connected. >> HTTP request sent, awaiting response... 200 OK >> Length: unspecified [text/plain] >> Saving to: `566597.patch' >> >> [ <=> >> ] 12,864 --.-K/s in 0s >> >> 2016-01-17 06:23:24 (115 MB/s) - `566597.patch' saved [12864] >> >> Applying: Add support for Netgear D7800 Using index info to >> reconstruct a base tree... >> <stdin>:109: space before tab in indent. >> qcom-ipq8064-ap148.dtb \ >> <stdin>:110: space before tab in indent. >> qcom-ipq8064-db149.dtb \ >> <stdin>:111: space before tab in indent. >> qcom-ipq8064-r7500.dtb \ >> <stdin>:113: space before tab in indent. >> qcom-msm8660-surf.dtb \ >> <stdin>:114: space before tab in indent. >> qcom-msm8960-cdp.dtb \ >> warning: squelched 1 whitespace error >> warning: 6 lines add whitespace errors. >> Falling back to patching base and 3-way merge... >> Auto-merging target/linux/ipq806x/image/Makefile >> Auto-merging target/linux/ipq806x/base-files/lib/upgrade/platform.sh >> CONFLICT (content): Merge conflict in >> target/linux/ipq806x/base-files/lib/upgrade/platform.sh >> Failed to merge in the changes. >> Patch failed at 0001 Add support for Netgear D7800 When you have >> resolved this problem run "git am --resolved". >> If you would prefer to skip this patch, instead run "git am --skip". >> To restore the original branch and stop patching run "git am --abort". >> Unstaged changes after reset: >> M target/linux/ipq806x/base-files/etc/board.d/01_leds >> M target/linux/ipq806x/base-files/etc/board.d/02_network >> M target/linux/ipq806x/base-files/lib/ipq806x.sh >> M target/linux/ipq806x/base-files/lib/upgrade/platform.sh >> M target/linux/ipq806x/image/Makefile >> M target/linux/ipq806x/profiles/netgear.mk >> applying 566597 FAILED >> >> >> patchwork 569813 >> --2016-01-17 06:22:13-- >> http://patchwork.ozlabs.org/patch/569813/mbox/ >> Resolving patchwork.ozlabs.org (patchwork.ozlabs.org)... 103.22.144.67 >> Connecting to patchwork.ozlabs.org >> (patchwork.ozlabs.org)|103.22.144.67|:80... connected. >> HTTP request sent, awaiting response... 200 OK >> Length: unspecified [text/plain] >> Saving to: `569813.patch' >> >> [ <=> >> ] 13,088 --.-K/s in 0s >> >> 2016-01-17 06:22:14 (172 MB/s) - `569813.patch' saved [13088] >> >> Applying: Add support for Netgear D7800 >> fatal: patch fragment without header at line 130: @@ -0,0 +1,381 @@ >> Repository lacks necessary blobs to fall back on 3-way merge. >> Cannot fall back to three-way merge. >> Patch failed at 0001 Add support for Netgear D7800 When you have >> resolved this problem run "git am --resolved". >> If you would prefer to skip this patch, instead run "git am --skip". >> To restore the original branch and stop patching run "git am --abort". >> applying 569813 FAILED >> >> >> >> >> On 19/01/2016 07:19, Tathagata Das wrote: >>> Any update about the patch? >>> >>> Regards, >>> Tathagata >>> >>> >>> -----Original Message----- >>> From: Tathagata Das [mailto:tathag...@alumnux.com] >>> Sent: 12 January 2016 20:47 >>> To: openwrt-devel@lists.openwrt.org >>> Cc: Tathagata Das >>> Subject: [PATCH] Add support for Netgear D7800 >>> >>> Signed-off-by: Tathagata Das <tathag...@alumnux.com> >>> --- >>> .../linux/ipq806x/base-files/etc/board.d/01_leds | 1 + >>> .../ipq806x/base-files/etc/board.d/02_network | 1 + >>> target/linux/ipq806x/base-files/lib/ipq806x.sh | 3 + >>> .../ipq806x/base-files/lib/upgrade/platform.sh | 2 + >>> target/linux/ipq806x/image/Makefile | 13 +- >>> ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch | 381 >>> +++++++++++++++++++++ >>> target/linux/ipq806x/profiles/netgear.mk | 13 + >>> 7 files changed, 413 insertions(+), 1 deletion(-) create mode >>> 100644 >>> target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk- >>> X >>> 4-D780 >>> 0-device-tree.patch >>> >>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds >>> b/target/linux/ipq806x/base-files/etc/board.d/01_leds >>> index 07b5b06..b32c1cc 100755 >>> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds >>> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds >>> @@ -11,6 +11,7 @@ board_config_update >>> board=$(ipq806x_board_name) >>> >>> case "$board" in >>> +d7800 |\ >>> r7500) >>> ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1" >>> ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1" >>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network >>> b/target/linux/ipq806x/base-files/etc/board.d/02_network >>> index 1302a55..6e18297 100755 >>> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network >>> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network >>> @@ -13,6 +13,7 @@ board=$(ipq806x_board_name) >>> >>> case "$board" in >>> ap148 |\ >>> +d7800 |\ >>> r7500) >>> ucidef_add_switch "switch0" \ >>> "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" >>> diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh >>> b/target/linux/ipq806x/base-files/lib/ipq806x.sh >>> index 5b27bde..db22708 100644 >>> --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh >>> +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh >>> @@ -17,6 +17,9 @@ ipq806x_board_detect() { >>> *"AP148") >>> name="ap148" >>> ;; >>> + *"D7800") >>> + name="d7800" >>> + ;; >>> *"DB149") >>> name="db149" >>> ;; >>> diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh >>> b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh >>> index c0e19a1..2400376 100644 >>> --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh >>> +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh >>> @@ -7,6 +7,7 @@ platform_check_image() { >>> >>> case "$board" in >>> AP148 |\ >>> + d7800 |\ >>> r7500) >>> nand_do_platform_check $board $1 >>> return $?; >>> @@ -21,6 +22,7 @@ platform_pre_upgrade() { >>> >>> case "$board" in >>> AP148 |\ >>> + d7800 |\ >>> r7500) >>> nand_do_upgrade "$1" >>> ;; >>> diff --git a/target/linux/ipq806x/image/Makefile >>> b/target/linux/ipq806x/image/Makefile >>> index 14cf442..b880a1b 100644 >>> --- a/target/linux/ipq806x/image/Makefile >>> +++ b/target/linux/ipq806x/image/Makefile >>> @@ -103,6 +103,17 @@ define Device/AP148-legacy >>> BOARD_NAME := ap148 >>> endef >>> >>> +define Device/D7800 >>> + $(call Device/DniImage) >>> + DEVICE_DTS := qcom-ipq8064-d7800 >>> + KERNEL_SIZE := 2097152 >>> + NETGEAR_BOARD_ID := D7800 >>> + NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4 >>> + BLOCKSIZE := 128KiB >>> + PAGESIZE := 2048 >>> + BOARD_NAME := d7800 >>> +endef >>> + >>> define Device/DB149 >>> $(call Device/FitImage) >>> DEVICE_DTS := qcom-ipq8064-db149 >>> @@ -121,6 +132,6 @@ define Device/R7500 >>> BOARD_NAME := r7500 >>> endef >>> >>> -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500 >>> +TARGET_DEVICES += AP148 AP148-legacy D7800 DB149 R7500 >>> >>> $(eval $(call BuildImage)) >>> diff --git >>> a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthaw >>> k >>> -X4-D7 >>> 800-device-tree.patch >>> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthaw >>> k >>> -X4-D7 >>> 800-device-tree.patch >>> new file mode 100644 >>> index 0000000..ecc1cff >>> --- /dev/null >>> +++ b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nigh >>> +++ t >>> +++ ha >>> +++ wk-X4-D7800-device-tree.patch >>> @@ -0,0 +1,381 @@ >>> +--- a/arch/arm/boot/dts/Makefile 2015-09-22 18:30:09.033530282 +0530 >>> ++++ b/arch/arm/boot/dts/Makefile 2015-09-23 17:06:44.892947581 +0530 >>> +@@ -362,6 +362,7 @@ >>> + qcom-ipq8064-ap148.dtb \ >>> + qcom-ipq8064-db149.dtb \ >>> + qcom-ipq8064-r7500.dtb \ >>> ++ qcom-ipq8064-d7800.dtb \ >>> + qcom-msm8660-surf.dtb \ >>> + qcom-msm8960-cdp.dtb \ >>> + qcom-msm8974-sony-xperia-honami.dtb >>> +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 1970-01-01 >>> 05:30:00.000000000 +0530 >>> ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 2015-09-23 >>> 17:06:45.336947567 +0530 >>> +@@ -0,0 +1,368 @@ >>> ++#include "qcom-ipq8064-v1.0.dtsi" >>> ++ >>> ++#include <dt-bindings/input/input.h> >>> ++ >>> ++/ { >>> ++ model = "Netgear Nighthawk X4 D7800"; >>> ++ compatible = "netgear,d7800", "qcom,ipq8064"; >>> ++ >>> ++ memory@0 { >>> ++ reg = <0x42000000 0xe000000>; >>> ++ device_type = "memory"; >>> ++ }; >>> ++ >>> ++ reserved-memory { >>> ++ #address-cells = <1>; >>> ++ #size-cells = <1>; >>> ++ ranges; >>> ++ rsvd@41200000 { >>> ++ reg = <0x41200000 0x300000>; >>> ++ no-map; >>> ++ }; >>> ++ }; >>> ++ >>> ++ aliases { >>> ++ serial0 = &uart4; >>> ++ mdio-gpio0 = &mdio0; >>> ++ }; >>> ++ >>> ++ chosen { >>> ++ bootargs = "rootfstype=squashfs noinitrd"; >>> ++ linux,stdout-path = "serial0:115200n8"; >>> ++ }; >>> ++ >>> ++ soc { >>> ++ pinmux@800000 { >>> ++ i2c4_pins: i2c4_pinmux { >>> ++ pins = "gpio12", "gpio13"; >>> ++ function = "gsbi4"; >>> ++ bias-disable; >>> ++ }; >>> ++ >>> ++ pcie0_pins: pcie0_pinmux { >>> ++ mux { >>> ++ pins = "gpio3"; >>> ++ function = "pcie1_rst"; >>> ++ drive-strength = <12>; >>> ++ bias-disable; >>> ++ }; >>> ++ }; >>> ++ >>> ++ pcie1_pins: pcie1_pinmux { >>> ++ mux { >>> ++ pins = "gpio48"; >>> ++ function = "pcie2_rst"; >>> ++ drive-strength = <12>; >>> ++ bias-disable; >>> ++ }; >>> ++ }; >>> ++ >>> ++ nand_pins: nand_pins { >>> ++ mux { >>> ++ pins = "gpio34", "gpio35", "gpio36", >>> ++ "gpio37", "gpio38", "gpio39", >>> ++ "gpio40", "gpio41", "gpio42", >>> ++ "gpio43", "gpio44", "gpio45", >>> ++ "gpio46", "gpio47"; >>> ++ function = "nand"; >>> ++ drive-strength = <10>; >>> ++ bias-disable; >>> ++ }; >>> ++ pullups { >>> ++ pins = "gpio39"; >>> ++ bias-pull-up; >>> ++ }; >>> ++ hold { >>> ++ pins = "gpio40", "gpio41", "gpio42", >>> ++ "gpio43", "gpio44", "gpio45", >>> ++ "gpio46", "gpio47"; >>> ++ bias-bus-hold; >>> ++ }; >>> ++ }; >>> ++ >>> ++ mdio0_pins: mdio0_pins { >>> ++ mux { >>> ++ pins = "gpio0", "gpio1"; >>> ++ function = "gpio"; >>> ++ drive-strength = <8>; >>> ++ bias-disable; >>> ++ }; >>> ++ }; >>> ++ >>> ++ rgmii2_pins: rgmii2_pins { >>> ++ mux { >>> ++ pins = "gpio27", "gpio28", "gpio29", >>> "gpio30", "gpio31", "gpio32", >>> ++ "gpio51", "gpio52", "gpio59", >>> "gpio60", "gpio61", "gpio62" ; >>> ++ function = "rgmii2"; >>> ++ drive-strength = <8>; >>> ++ bias-disable; >>> ++ }; >>> ++ }; >>> ++ }; >>> ++ >>> ++ gsbi@16300000 { >>> ++ qcom,mode = <GSBI_PROT_I2C_UART>; >>> ++ status = "ok"; >>> ++ serial@16340000 { >>> ++ status = "ok"; >>> ++ }; >>> ++ /* >>> ++ * The i2c device on gsbi4 should not be enabled. >>> ++ * On ipq806x designs gsbi4 i2c is meant for >>> exclusive >>> ++ * RPM usage. Turning this on in kernel manifests as >>> ++ * i2c failure for the RPM. >>> ++ */ >>> ++ }; >>> ++ >>> ++ sata-phy@1b400000 { >>> ++ status = "ok"; >>> ++ }; >>> ++ >>> ++ sata@29000000 { >>> ++ status = "ok"; >>> ++ }; >>> ++ >>> ++ phy@100f8800 { /* USB3 port 1 HS phy */ >>> ++ status = "ok"; >>> ++ }; >>> ++ >>> ++ phy@100f8830 { /* USB3 port 1 SS phy */ >>> ++ status = "ok"; >>> ++ }; >>> ++ >>> ++ phy@110f8800 { /* USB3 port 0 HS phy */ >>> ++ status = "ok"; >>> ++ }; >>> ++ >>> ++ phy@110f8830 { /* USB3 port 0 SS phy */ >>> ++ status = "ok"; >>> ++ }; >>> ++ >>> ++ usb30@0 { >>> ++ status = "ok"; >>> ++ }; >>> ++ >>> ++ usb30@1 { >>> ++ status = "ok"; >>> ++ }; >>> ++ >>> ++ pcie0: pci@1b500000 { >>> ++ status = "ok"; >>> ++ reset-gpio = <&qcom_pinmux 3 0>; >>> ++ pinctrl-0 = <&pcie0_pins>; >>> ++ pinctrl-names = "default"; >>> ++ }; >>> ++ >>> ++ pcie1: pci@1b700000 { >>> ++ status = "ok"; >>> ++ reset-gpio = <&qcom_pinmux 48 0>; >>> ++ pinctrl-0 = <&pcie1_pins>; >>> ++ pinctrl-names = "default"; >>> ++ }; >>> ++ >>> ++ nand@1ac00000 { >>> ++ status = "ok"; >>> ++ >>> ++ pinctrl-0 = <&nand_pins>; >>> ++ pinctrl-names = "default"; >>> ++ >>> ++ nand-ecc-strength = <4>; >>> ++ nand-bus-width = <8>; >>> ++ >>> ++ #address-cells = <1>; >>> ++ #size-cells = <1>; >>> ++ >>> ++ qcadata@0 { >>> ++ label = "qcadata"; >>> ++ reg = <0x0000000 0x0c80000>; >>> ++ read-only; >>> ++ }; >>> ++ >>> ++ APPSBL@c80000 { >>> ++ label = "APPSBL"; >>> ++ reg = <0x0c80000 0x0500000>; >>> ++ read-only; >>> ++ }; >>> ++ >>> ++ APPSBLENV@1180000 { >>> ++ label = "APPSBLENV"; >>> ++ reg = <0x1180000 0x0080000>; >>> ++ read-only; >>> ++ }; >>> ++ >>> ++ art: art@1200000 { >>> ++ label = "art"; >>> ++ reg = <0x1200000 0x0140000>; >>> ++ read-only; >>> ++ }; >>> ++ >>> ++ artbak: art@1340000 { >>> ++ label = "artbak"; >>> ++ reg = <0x1340000 0x0140000>; >>> ++ read-only; >>> ++ }; >>> ++ >>> ++ kernel@1480000 { >>> ++ label = "kernel"; >>> ++ reg = <0x1480000 0x0200000>; >>> ++ }; >>> ++ >>> ++ ubi@1680000 { >>> ++ label = "ubi"; >>> ++ reg = <0x1680000 0x1E00000>; >>> ++ }; >>> ++ >>> ++ netgear@3480000 { >>> ++ label = "netgear"; >>> ++ reg = <0x3480000 0x4480000>; >>> ++ read-only; >>> ++ }; >>> ++ >>> ++ reserve@7900000 { >>> ++ label = "reserve"; >>> ++ reg = <0x7900000 0x0700000>; >>> ++ read-only; >>> ++ }; >>> ++ >>> ++ firmware@1480000 { >>> ++ label = "firmware"; >>> ++ reg = <0x1480000 0x2000000>; >>> ++ }; >>> ++ >>> ++ }; >>> ++ >>> ++ mdio0: mdio { >>> ++ compatible = "virtual,mdio-gpio"; >>> ++ #address-cells = <1>; >>> ++ #size-cells = <0>; >>> ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; >>> ++ pinctrl-0 = <&mdio0_pins>; >>> ++ pinctrl-names = "default"; >>> ++ >>> ++ phy0: ethernet-phy@0 { >>> ++ device_type = "ethernet-phy"; >>> ++ reg = <0>; >>> ++ qca,ar8327-initvals = < >>> ++ 0x00004 0x7600000 /* PAD0_MODE */ >>> ++ 0x00008 0x1000000 /* PAD5_MODE */ >>> ++ 0x0000c 0x80 /* PAD6_MODE */ >>> ++ 0x000e4 0xaa545 /* MAC_POWER_SEL >>> */ >>> ++ 0x000e0 0xc74164de /* SGMII_CTRL */ >>> ++ 0x0007c 0x4e /* PORT0_STATUS >>> */ >>> ++ 0x00094 0x4e /* PORT6_STATUS >>> */ >>> ++ >; >>> ++ }; >>> ++ >>> ++ phy4: ethernet-phy@4 { >>> ++ device_type = "ethernet-phy"; >>> ++ reg = <4>; >>> ++ }; >>> ++ }; >>> ++ >>> ++ gmac1: ethernet@37200000 { >>> ++ status = "ok"; >>> ++ phy-mode = "rgmii"; >>> ++ phy-handle = <&phy4>; >>> ++ qcom,id = <1>; >>> ++ >>> ++ pinctrl-0 = <&rgmii2_pins>; >>> ++ pinctrl-names = "default"; >>> ++ >>> ++ mtd-mac-address = <&art 6>; >>> ++ }; >>> ++ >>> ++ gmac2: ethernet@37400000 { >>> ++ status = "ok"; >>> ++ phy-mode = "sgmii"; >>> ++ qcom,id = <2>; >>> ++ >>> ++ mtd-mac-address = <&art 0>; >>> ++ >>> ++ fixed-link { >>> ++ speed = <1000>; >>> ++ full-duplex; >>> ++ }; >>> ++ }; >>> ++ }; >>> ++ >>> ++ gpio-keys { >>> ++ compatible = "gpio-keys"; >>> ++ >>> ++ wifi { >>> ++ label = "wifi"; >>> ++ gpios = <&qcom_pinmux 6 1>; >>> ++ linux,code = <KEY_WLAN>; >>> ++ }; >>> ++ >>> ++ reset { >>> ++ label = "reset"; >>> ++ gpios = <&qcom_pinmux 54 1>; >>> ++ linux,code = <KEY_RESTART>; >>> ++ }; >>> ++ >>> ++ wps { >>> ++ label = "wps"; >>> ++ gpios = <&qcom_pinmux 65 1>; >>> ++ linux,code = <KEY_WPS_BUTTON>; >>> ++ }; >>> ++ }; >>> ++ >>> ++ gpio-leds { >>> ++ compatible = "gpio-leds"; >>> ++ >>> ++ usb1 { >>> ++ label = "d7800:amber:usb1"; >>> ++ gpios = <&qcom_pinmux 7 0>; >>> ++ }; >>> ++ >>> ++ usb3 { >>> ++ label = "d7800:amber:usb3"; >>> ++ gpios = <&qcom_pinmux 8 0>; >>> ++ }; >>> ++ >>> ++ status { >>> ++ label = "d7800:amber:status"; >>> ++ gpios = <&qcom_pinmux 9 0>; >>> ++ }; >>> ++ >>> ++ internet { >>> ++ label = "d7800:white:internet"; >>> ++ gpios = <&qcom_pinmux 22 0>; >>> ++ }; >>> ++ >>> ++ wan { >>> ++ label = "d7800:white:wan"; >>> ++ gpios = <&qcom_pinmux 23 0>; >>> ++ }; >>> ++ >>> ++ wps { >>> ++ label = "d7800:white:wps"; >>> ++ gpios = <&qcom_pinmux 24 0>; >>> ++ }; >>> ++ >>> ++ esata { >>> ++ label = "d7800:white:esata"; >>> ++ gpios = <&qcom_pinmux 26 0>; >>> ++ }; >>> ++ >>> ++ power { >>> ++ label = "d7800:white:power"; >>> ++ gpios = <&qcom_pinmux 53 0>; >>> ++ default-state = "on"; >>> ++ }; >>> ++ >>> ++ rfkill { >>> ++ label = "d7800:white:rfkill"; >>> ++ gpios = <&qcom_pinmux 64 0>; >>> ++ }; >>> ++ >>> ++ wifi5g { >>> ++ label = "d7800:white:wifi5g"; >>> ++ gpios = <&qcom_pinmux 67 0>; >>> ++ }; >>> ++ }; >>> ++}; >>> ++ >>> ++&adm_dma { >>> ++ status = "ok"; >>> ++}; >>> diff --git a/target/linux/ipq806x/profiles/netgear.mk >>> b/target/linux/ipq806x/profiles/netgear.mk >>> index 3402f45..25258cd 100644 >>> --- a/target/linux/ipq806x/profiles/netgear.mk >>> +++ b/target/linux/ipq806x/profiles/netgear.mk >>> @@ -6,6 +6,18 @@ >>> # See /LICENSE for more information. >>> # >>> >>> +define Profile/D7800 >>> + NAME:=Netgear Nighthawk X4 D7800 >>> + PACKAGES:= \ >>> + kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \ >>> + kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \ >>> + kmod-ath10k wpad-mini ath10k-firmware-qca99x0 endef >>> + >>> +define Profile/D7800/Description >>> + Package set for the Netgear Nighthawk X4 D7800. >>> +endef >>> + >>> define Profile/R7500 >>> NAME:=Netgear Nighthawk X4 R7500 >>> PACKAGES:= \ >>> @@ -17,4 +29,5 @@ endef >>> define Profile/R7500/Description >>> Package set for the Netgear Nighthawk X4 R7500. >>> endef >>> +$(eval $(call Profile,D7800)) >>> $(eval $(call Profile,R7500)) >>> -- >>> 1.9.1 >>> _______________________________________________ >>> openwrt-devel mailing list >>> openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>> _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
