If on trunk, what compile options do use to make the images build
successfully? I get failed compiles with warning that the image is too
big on any brcm47xx target I tried, so unless wl-500gp is bigger than
most of them, I'm thinking you're either doing something special, or are
not on trunk. (And I tried cutting *way* back on things that increase
image, well below normal OpenWrt).
Regards,
Daniel
On 14/01/16 10:59 AM, Roman Yeryomin wrote:
On 14 January 2016 at 17:31, <open...@daniel.thecshore.com> wrote:
From: Daniel Dickinson <open...@daniel.thecshore.com>
To my knowledge there are no working images, nor a way to get them,
even using maximum stripping and dropping of packages, kmods, and
compile options due to the small size of the targets for this
architecture. Therefore mark this arch broken and maybe remove
unless someone decides to fix it.
Signed-off-by: Daniel Dickinson <open...@daniel.thecshore.com>
---
target/linux/brcm47xx/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/target/linux/brcm47xx/Makefile b/target/linux/brcm47xx/Makefile
index e0c44c8..fae1f59 100644
--- a/target/linux/brcm47xx/Makefile
+++ b/target/linux/brcm47xx/Makefile
@@ -12,6 +12,7 @@ BOARDNAME:=Broadcom BCM47xx/53xx (MIPS)
FEATURES:=squashfs usb
SUBTARGETS:=generic mips74k legacy
MAINTAINER:=Hauke Mehrtens <ha...@hauke-m.de>
+DEPENDS:=@BROKEN
KERNEL_PATCHVER:=4.1
m? at least Asus rt-n16 and wl-500gp work fine!
Regards,
Roman
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
