- ethernet gigabit pll
- switch configuration
- sysupgrade
Signed-off-by: Roman Yeryomin <ro...@advem.lv>
---
target/linux/ar71xx/base-files/etc/board.d/02_network | 1 +
target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c | 1 -
3 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 6b6c6a4..190b693 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -23,6 +23,7 @@ ubnt-unifi-outdoor)
;;
ap132 |\
+ap152 |\
wlr8100)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index e662524..1f6eaf2 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -184,6 +184,7 @@ platform_check_image() {
ap136-020 | \
ap135-020 | \
ap147-010 | \
+ ap152 | \
ap96 | \
bxu2000n-2-a1 | \
db120 | \
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c
index a1eb06b..e669325 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c
@@ -132,7 +132,6 @@ static void __init ap152_setup(void)
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
ath79_register_eth(0);
}
--
2.5.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
