Hello, I had a working build r42397 which was stable enough so I didn't touch it until today. I built openwrt trunk r48016 (last night) and everything built without any issues.
I like to load thing the factory image but this time loading the factory image resulted in no internet. Router came on, I could see activity on the indicator lights but no IP. I did notice that the front LED light do not stay on after the factory install on this build. On a working build, the front LED stays on (solid) when working (default config). I have LUCI pre-baked as I use the same configs. I personally run a diff between the configs and didn't see anything that would have broken booting from factory flash install. Then I reverted to a working openwrt (r46900) build that I factory-flashed and then proceeded to do a sysupgrade of r48016 (and wipe existing settings). This WORKED, the router boots. Something seems to be not working with factory install, but is working with the sysupgrade. I have no way to debug this. Just thought I should bring this to the attention of the devs in the forum. Thank you, cchhat01
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
