2015-12-30 11:52 GMT+01:00 Baptiste Clenet <bapcle...@gmail.com>: > Hi, > > I'm working on the MT7628 board and I try to register GPIO's irq. (I > haven't updated to kernel 4.3, I'm still on the previous version 3.18) > I've got two interrupts on GPIO 15 and GPIO 46. I see that to register > the interrupts it uses the internal GPIO interrupts (number 6). The > fact is, it register one handler for internal GPIO so whenever any of > the GPIO's irq (GPIO 15 or 46) are triggered, it always calls the same > handler. > Does it make sense? I may explain differently if it's not clear. > > How could I register both handlers? Is there a GPIO-IRQ driver which > handle IRQ from GPIO? > > By the way, thank you for your work on porting mt7628 to kernel 4.3, > I'm excited to try! > > Cheers, > > -- > Baptiste
As far as I can see in [1], it seems that it has been implemented with the new patches. Is that right? [1] https://dev.openwrt.org/browser/trunk/target/linux/ramips/patches-4.3/0028-GPIO-ralink-add-mt7621-gpio-controller.patch -- Baptiste _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
