According to ITU-T G.997.1 Amendment 2 (04/2013) section 2.1, bit 3 of
XTSE octet 8 either allow or denies the initialization of G.993.5.
Even if the current redistributable xDSL firmware doesn't include
G.993.5 vectoring support, enable this bit by default to allow people to
get their G.993.5 line working using a custom xDSL firmware.
Signed-off-by: Mathias Kresin <open...@kresin.me>
---
package/network/config/ltq-vdsl-app/files/dsl_control | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/package/network/config/ltq-vdsl-app/files/dsl_control
b/package/network/config/ltq-vdsl-app/files/dsl_control
index 8578c0b..db5eb2a 100644
--- a/package/network/config/ltq-vdsl-app/files/dsl_control
+++ b/package/network/config/ltq-vdsl-app/files/dsl_control
@@ -13,19 +13,22 @@ EXTRA_HELP=" status Get DSL status information
#
# ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system
enabling (XTSE))
+# ITU-T G.997.1 Amendment 2 (04/2013) - Section 2.1 - (Vectoring mode enable
(VECTORMODE_ENABLE))
#
# G.992.1 Annex A
# G.992.3 Annex A / L-US1 / L_US-2 / M
# G.992.5 Annex A / M
# G.993.2 Annex A/B/C
-xtse_xdsl_a="04_00_04_00_0C_01_04_07"
+# G.993.5 Annex A/B/C
+xtse_xdsl_a="04_00_04_00_0C_01_04_0F"
# G.992.1 Annex B
# G.992.3 Annex B
# G.992.5 Annex B
# G.993.2 Annex A/B/C
-xtse_adsl_b="10_00_10_00_00_04_00_07"
+# G.993.5 Annex A/B/C
+xtse_xdsl_b="10_00_10_00_00_04_00_0F"
# G.992.1 Annex B
# G.992.3 Annex B
@@ -33,7 +36,8 @@ xtse_adsl_b="10_00_10_00_00_04_00_07"
# G.992.5 Annex B
# G.992.5 Annex J
# G.993.2 Annex A/B/C
-xtse_adsl_j="10_00_10_40_00_04_01_07"
+# G.993.5 Annex A/B/C
+xtse_xdsl_j="10_00_10_40_00_04_01_0F"
service_triggers() {
procd_add_reload_trigger network
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
