Hi,
the patch subject is missing the "ralink: " prefix
John
On 24/12/2015 17:13, xzmu wrote:
> Signed-off-by: xzmu <x...@wrtnode.com>
> ---
> .../linux/ramips/base-files/etc/board.d/02_network | 2 +
> target/linux/ramips/base-files/etc/diag.sh | 5 ++
> target/linux/ramips/base-files/lib/ramips.sh | 6 ++
> .../ramips/base-files/lib/upgrade/platform.sh | 2 +
> target/linux/ramips/dts/WRTNODE2.dtsi | 95
> ++++++++++++++++++++++
> target/linux/ramips/dts/WRTNODE2P.dts | 26 ++++++
> target/linux/ramips/dts/WRTNODE2R.dts | 26 ++++++
> target/linux/ramips/image/Makefile | 4 +
> 8 files changed, 166 insertions(+)
> create mode 100644 target/linux/ramips/dts/WRTNODE2.dtsi
> create mode 100644 target/linux/ramips/dts/WRTNODE2P.dts
> create mode 100644 target/linux/ramips/dts/WRTNODE2R.dts
>
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> index 719e968..dafa3e9 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -117,6 +117,8 @@ ramips_setup_interfaces()
> ubnt-erx|\
> ur-326n4g|\
> wrtnode|\
> + wrtnode2p | \
> + wrtnode2r | \
> wt3020|\
> zbt-wa05)
> ucidef_add_switch "switch0" \
> diff --git a/target/linux/ramips/base-files/etc/diag.sh
> b/target/linux/ramips/base-files/etc/diag.sh
> index 3e8a331..acc500b 100644
> --- a/target/linux/ramips/base-files/etc/diag.sh
> +++ b/target/linux/ramips/base-files/etc/diag.sh
> @@ -181,6 +181,11 @@ get_status_led() {
> wsr-600)
> status_led="$board:orange:diag"
> ;;
> + wrtnode2r | \
> + wrtnode2p | \
> + wrtnode)
> + status_led="wrtnode:blue:indicator"
> + ;;
> esac
> }
>
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> index 62be045..8025a40 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -433,6 +433,12 @@ ramips_board_detect() {
> *"WRTNODE")
> name="wrtnode"
> ;;
> + *"WRTnode2R")
> + name="wrtnode2r"
> + ;;
> + *"WRTnode2P")
> + name="wrtnode2p"
> + ;;
> *"WSR-1166DHP")
> name="wsr-1166"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index f8073d1..39b5f94 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -125,6 +125,8 @@ platform_check_image() {
> wr512-3gn|\
> wr6202|\
> wrtnode|\
> + wrtnode2r |\
> + wrtnode2p |\
> wsr-600|\
> wt1520|\
> wt3020|\
> diff --git a/target/linux/ramips/dts/WRTNODE2.dtsi
> b/target/linux/ramips/dts/WRTNODE2.dtsi
> new file mode 100644
> index 0000000..62a56cc
> --- /dev/null
> +++ b/target/linux/ramips/dts/WRTNODE2.dtsi
> @@ -0,0 +1,95 @@
> +/dts-v1/;
> +
> +/include/ "mt7628an.dtsi"
> +
> +/ {
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + };
> +
> + palmbus@10000000 {
> + spi@b00 {
> + status = "okay";
> +
> + m25p80@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q256";
> + reg = <0 0>;
> + linux,modalias = "m25p80", "w25q256";
> + spi-max-frequency = <10000000>;
> + m25p,chunked-io = <32>;
> +
> + partition@0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition@30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition@40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition@50000 {
> + label = "firmware";
> + reg = <0x50000 0x1fb0000>;
> + };
> + };
> +
> +
> + spidev@1 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "spidev";
> + reg = <1 0>;
> + linux,modalias = "spidev", "spidev";
> + spi-max-frequency = <10000000>;
> + };
> + };
> +
> + uart1@d00 {
> + status = "okay";
> + };
> +
> + i2c@900 {
> + status = "okay";
> + };
> +
> + };
> +
> + ethernet@10100000 {
> + mtd-mac-address = <&factory 0x4>;
> + ralink,port-map = "llllw";
> + };
> +
> + sdhci@10130000 {
> + status = "okay";
> + };
> +
> + pcie@10140000 {
> + status = "okay";
> + };
> +
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> + reset {
> + label = "reset";
> + gpios = <&gpio0 5 1>;
> + linux,code = <0x198>;
> + };
> + };
> +
> +};
> +
> diff --git a/target/linux/ramips/dts/WRTNODE2P.dts
> b/target/linux/ramips/dts/WRTNODE2P.dts
> new file mode 100644
> index 0000000..79616ad
> --- /dev/null
> +++ b/target/linux/ramips/dts/WRTNODE2P.dts
> @@ -0,0 +1,26 @@
> +/dts-v1/;
> +
> +/include/ "WRTNODE2.dtsi"
> +
> +/ {
> + compatible = "mediatek,wrtnode2p", "mediatek,mt7628an-soc";
> + model = "WRTnode2P";
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "i2c", "gpio", "jtag";
> + ralink,function = "gpio";
> + };
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + indicator {
> + label = "wrtnode:blue:indicator";
> + gpios = <&gpio1 9 1>;
> + };
> + };
> +};
> +
> diff --git a/target/linux/ramips/dts/WRTNODE2R.dts
> b/target/linux/ramips/dts/WRTNODE2R.dts
> new file mode 100644
> index 0000000..e6eee82
> --- /dev/null
> +++ b/target/linux/ramips/dts/WRTNODE2R.dts
> @@ -0,0 +1,26 @@
> +/dts-v1/;
> +
> +/include/ "WRTNODE2.dtsi"
> +
> +/ {
> + compatible = "mediatek,wrtnode2r", "mediatek,mt7628an-soc";
> + model = "WRTnode2R";
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "i2c", "gpio", "wled_an";
> + ralink,function = "gpio";
> + };
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + indicator {
> + label = "wrtnode:blue:indicator";
> + gpios = <&gpio1 12 1>;
> + };
> + };
> +};
> +
> diff --git a/target/linux/ramips/image/Makefile
> b/target/linux/ramips/image/Makefile
> index 2c0fc46..6d4dd64 100644
> --- a/target/linux/ramips/image/Makefile
> +++ b/target/linux/ramips/image/Makefile
> @@ -1087,10 +1087,12 @@ endef
> #
>
> Image/Build/Profile/MT7628=$(call
> BuildFirmware/Default4M/$(1),$(1),mt7628,MT7628)
> +Image/Build/Profile/WRTNODE2P=$(call
> BuildFirmware/Default16M/$(1),$(1),wrtnode2p,WRTNODE2P)
>
> ifeq ($(SUBTARGET),mt7628)
> define Image/Build/Profile/Default
> $(call Image/Build/Profile/MT7628,$(1))
> + $(call Image/Build/Profile/WRTNODE2P,$(1))
> endef
> endif
>
> @@ -1100,10 +1102,12 @@ endif
> #
>
> Image/Build/Profile/LinkIt7688=$(call
> BuildFirmware/Default32M/$(1),$(1),LinkIt7688,LINKIT7688)
> +Image/Build/Profile/WRTNODE2R=$(call
> BuildFirmware/Default16M/$(1),$(1),wrtnode2r,WRTNODE2R)
>
> ifeq ($(SUBTARGET),mt7688)
> define Image/Build/Profile/Default
> $(call Image/Build/Profile/LinkIt7688,$(1))
> + $(call Image/Build/Profile/WRTNODE2R,$(1))
> endef
> endif
>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
