I chose to use Device Tree Source files to define some common used
leds. This way it's possible to prevent the bloating (as it can be seen
on other tragets) of the led board.d file as well as the diag.sh file.
No need to carry dozen of - unrelated - board specific led definitions
with each board.
The colours where matched to the names used in the board manual. The
function names are either the led lable printed on the board cases or
the name used in the manual. If I found a led missing, I left a comment
in the dts file.
Due to missing board manuals or insufficient informations in the board
manual, I wasn't able to rename the leds of the following boards:
ARV7519PW, ARV7510PW22, ARV4510PW and ARV4518PWR01*.
The ARV4518PWR01* boards are somehow special, since the leds doesn't
match the leds from the manual or pictures I found (e.g. there
shouldn't be a wps led).
If someone can provide the required informations for the mentioned
boards, feel free to contact me.
The first few patches are only for cleaning up some of the dts files,
which made it easier for me to rename the leds later on. Patch 11 "Add
support for indicating the boot state using three leds" doesn't match
directly the purpose of the series, but it allows me to remove even
more leds form the board.d led file before renaming.
HELP:
In addition, I tried to allow dsl_notify.sh to control a shared
dsl/internet LED as well. But I missed that dsl_notify.sh assigns a
timer trigger to the LED and therefore replaces the netdev trigger.
Till now, I couldn't figure out, how to reload the configuration of a
single led (here at the dsl_notify UP event to re-add the netdev
trigger).
Did I missed something or does this functionality need to be
implemented.
GENERAL NOTE:
Since I have to had a look at all dts files, I noticed the following
oddness:
- ARV4525PW: doesn't have bootargs
- GIGASX76X: doesn't have leds defined, where the old mach file had
This series has been runtime tested on BTHOMEHUBV5A, TDW8980,
VGV7510KW22 and ARV752DPW22.
All other boards are compile tested.
V2:
- fix not updated lan led name in the leds file (ARV7519RW22)
- fix not renamed ISDN led (ARV4520PW)
- fix spaces vs. tabs issue in diag.sh
- use boardname instead of the generic soc
Mathias Kresin (12):
lantiq: P2812HNUFX - move leds to dtsi
lantiq: BTHOMEHUBV2B - remove missing usb led workaround
lantiq: ARV4518PWR01* move redundant parts to dtsi
lantiq: DGN1000B - fix typo in dts file
lantiq: ARV752DPW22 - fix dts file
lantiq: ARV752DPW - fix dts file
lantiq: define default leds in dts files
lantiq: use default leds defined in DTS
lantiq: use power leds defined in DTS
lantiq: use dsl led defined in DTS
lantiq: add support for indicating the boot state using three leds
lantiq: use devicename:colour:function led naming scheme
target/linux/lantiq/base-files/etc/board.d/01_leds | 65 ++-----
target/linux/lantiq/base-files/etc/diag.sh | 50 ++----
.../lantiq/base-files/lib/functions/lantiq.sh | 16 ++
target/linux/lantiq/base-files/sbin/dsl_notify.sh | 14 +-
target/linux/lantiq/dts/ARV4510PW.dts | 27 ++-
target/linux/lantiq/dts/ARV4518PWR01.dts | 179 +------------------
target/linux/lantiq/dts/ARV4518PWR01.dtsi | 196 +++++++++++++++++++++
target/linux/lantiq/dts/ARV4518PWR01A.dts | 179 +------------------
target/linux/lantiq/dts/ARV4519PW.dts | 60 ++++---
target/linux/lantiq/dts/ARV4520PW.dts | 58 +++---
target/linux/lantiq/dts/ARV4525PW.dts | 29 ++-
target/linux/lantiq/dts/ARV452CQW.dts | 55 +++---
target/linux/lantiq/dts/ARV7510PW22.dts | 16 +-
target/linux/lantiq/dts/ARV7518PW.dts | 54 +++---
target/linux/lantiq/dts/ARV7519PW.dts | 24 ++-
target/linux/lantiq/dts/ARV7519RW22.dts | 30 ++--
target/linux/lantiq/dts/ARV7525PW.dts | 31 ++--
target/linux/lantiq/dts/ARV752DPW.dts | 47 +++--
target/linux/lantiq/dts/ARV752DPW22.dts | 67 ++++---
target/linux/lantiq/dts/ARV8539PW22.dts | 36 ++--
target/linux/lantiq/dts/BTHOMEHUBV2B.dts | 43 +++--
target/linux/lantiq/dts/BTHOMEHUBV3A.dts | 39 ++--
target/linux/lantiq/dts/BTHOMEHUBV5A.dts | 41 +++--
target/linux/lantiq/dts/DGN1000B.dts | 32 ++--
target/linux/lantiq/dts/DGN3500.dtsi | 44 +++--
target/linux/lantiq/dts/EASY80920.dtsi | 35 ++--
target/linux/lantiq/dts/FRITZ3370.dts | 35 ++--
target/linux/lantiq/dts/FRITZ7320.dts | 31 ++--
target/linux/lantiq/dts/GR7000.dts | 28 +--
target/linux/lantiq/dts/H201L.dts | 37 ++--
target/linux/lantiq/dts/P2601HNFX.dts | 40 +++--
target/linux/lantiq/dts/P2812HNUF1.dts | 61 -------
target/linux/lantiq/dts/P2812HNUF3.dts | 53 ------
target/linux/lantiq/dts/P2812HNUFX.dtsi | 76 +++++++-
target/linux/lantiq/dts/TDW8980.dts | 2 +-
target/linux/lantiq/dts/TDW89X0.dtsi | 35 ++--
target/linux/lantiq/dts/VG3503J.dtsi | 21 ++-
target/linux/lantiq/dts/VGV7510KW22.dtsi | 41 +++--
target/linux/lantiq/dts/VGV7519.dtsi | 70 ++++----
target/linux/lantiq/dts/WBMR.dts | 42 +++--
40 files changed, 1068 insertions(+), 971 deletions(-)
create mode 100644 target/linux/lantiq/dts/ARV4518PWR01.dtsi
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
