This series completes the support for Cisco Meraki's MR18 router [0]. It features: CPU: Atheros/Qualcomm QCA9557-AT4A at 720MHz RAM: 128 MiB DDR2 NAND Flash: Hynix NAND 128MiB 3,3V 8-bit Wireless: SoC AR9550 + 2x Atheros AR9582-AR1A (one 5Ghz, other 2.4Ghz/5Ghz) Ethernet: 1x Gigabit AR8035-A, 802.3af PoE capable
For anyone interested, a working image [and information about how to flash the locked device] has been posted on the forum [1]. Pictures and bootlogs can be found in the wiki [2] too. [0] <https://meraki.cisco.com/products/wireless/mr18> [1] <https://forum.openwrt.org/viewtopic.php?id=59248> [2] <http://wiki.openwrt.org/toh/meraki/mr18> v7 -> v8: - Architecure and Support files (mach-mr18.c and ar71xx_regs.h) have been merged (dropped from this change set) - fixed sysupgrade for other platforms v6 -> v7: - LED portion has been merged (dropped from this change set) - firmware tool has been merged (dropped as well) - made separate patch for "base-files: cleanup mtd_get_mac_binary hexdump" - image will be created using the new method (Alexander's comment) - overhauled and split "scan nand ubi partition for ath9k eeprom files" (Yousong's comment) - fixed "will always be true" (Vittorio's comment) v5 -> v6: (John's comments) - made separate patch for "base-files: use max_brightness to set LED" - made separate patch for "scan nand ubi partition for ath9k eeprom files" - moved "rx/rvd delay code" into mach-mr18.c - moved "serdes calibration code" into mach-mr18.c Chris R Blake (3): ar71xx: refactor 10-ath9k-eeprom ar71xx: scan nand ubi partition for ath9k eeprom files base-files: cleanup mtd_get_mac_binary hexdump package/base-files/files/lib/functions/system.sh | 19 +++++++++++++- .../etc/hotplug.d/firmware/10-ath9k-eeprom | 29 +++++++++++++++++----- 2 files changed, 41 insertions(+), 7 deletions(-) -- 2.6.4 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
