This patch is to add support for the AirTight Networks C-55 Access Point
Signed-off-by: Chris R Blake <chrisrblak...@gmail.com>
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 6 +
.../linux/ar71xx/base-files/etc/board.d/02_network | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 8 ++
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../base-files/lib/preinit/05_set_iface_mac_ar71xx | 5 +-
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-4.1 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 ++
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../linux/ar71xx/files/arch/mips/ath79/mach-c55.c | 132 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/generic/profiles/airtight.mk | 17 +++
target/linux/ar71xx/image/Makefile | 10 ++
14 files changed, 198 insertions(+), 1 deletion(-)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-c55.c
create mode 100644 target/linux/ar71xx/generic/profiles/airtight.mk
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index ed2aeae..11d5418 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -92,6 +92,12 @@ bxu2000n-2-a1)
ucidef_set_led_wlan "wlan" "WLAN" "bhu:green:wlan" "phy0tpt"
;;
+c-55)
+ ucidef_set_led_netdev "lan_green" "LAN_GREEN" "c-55:green:lan" "eth0"
+ ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "c-55:amber:wlan"
"phy0tpt"
+ ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "c-55:green:wlan"
"phy1tpt"
+ ;;
+
cap4200ag)
ucidef_set_led_default "lan_green" "LAN_GREEN" "senao:green:lan" "1"
ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "senao:amber:wlan"
"phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
b/target/linux/ar71xx/base-files/etc/board.d/02_network
index bfc898c..6874486 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -308,6 +308,7 @@ antminer-s1 |\
antminer-s3 |\
aw-nr580 |\
bullet-m |\
+c-55 |\
cap4200ag |\
eap300v2 |\
eap7660d |\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
index fd57c55..b5a9fff 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -55,6 +55,9 @@ get_status_led() {
bxu2000n-2-a1)
status_led="bhu:green:status"
;;
+ c-55)
+ status_led="c-55:green:pwr"
+ ;;
cap4200ag)
status_led="senao:green:pwr"
;;
diff --git
a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 5398e76..807d4a9 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -38,6 +38,10 @@ board=$(ar71xx_board_name)
case "$FIRMWARE" in
"soc_wmac.eeprom")
case $board in
+ c-55)
+ ath9k_eeprom_extract "art" 4096 2048
+ ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art
0) +1)
+ ;;
mr18)
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
ath9k_ubi_eeprom_extract "caldata" 4096 2048
@@ -60,6 +64,10 @@ case "$FIRMWARE" in
"pci_wmac0.eeprom")
case $board in
+ c-55)
+ ath9k_eeprom_extract "art" 20480 2048
+ ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art
0) +2)
+ ;;
mr18)
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
ath9k_ubi_eeprom_extract "caldata" 20480 2048
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 5af7adf..026c576 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -411,6 +411,9 @@ ar71xx_board_detect() {
*AW-NR580)
name="aw-nr580"
;;
+ *C-55)
+ name="c-55"
+ ;;
*CAP4200AG)
name="cap4200ag"
;;
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
index a9f4bf5..39da309 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
@@ -22,6 +22,10 @@ fetch_mac_from_mtd() {
preinit_set_mac_address() {
case $(ar71xx_board_name) in
+ c-55)
+ mac_lan=$(mtd_get_mac_binary art 0)
+ [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
+ ;;
dir-615-c1)
fetch_mac_from_mtd config lan_mac wan_mac
echo 1 >
/sys/class/leds/dir-615-c1:green:wancpu/brightness
@@ -49,4 +53,3 @@ preinit_set_mac_address() {
}
boot_hook_add preinit_main preinit_set_mac_address
-
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 7e564b4..e911092 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -201,6 +201,7 @@ platform_check_image() {
ap81 | \
ap83 | \
ap132 | \
+ c-55 | \
cf-e316n-v2 | \
dgl-5500-a1 |\
dhp-1565-a1 |\
diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
index 15754d9..79cf2df 100644
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
@@ -50,6 +50,7 @@ CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_BSB=y
+CONFIG_ATH79_MACH_C55=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_CF_E316N_V2=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index d619b3c..be74d3f 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -182,6 +182,16 @@ config ATH79_MACH_PB92
select ATH79_DEV_PB9X_PCI if PCI
select ATH79_DEV_USB
+config ATH79_MACH_C55
+ bool "AirTight Networks C-55 support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_AW_NR580
bool "AzureWave AW-NR580 board support"
select SOC_AR71XX
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 9f67bd8..3fbe1a3 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -114,6 +114,7 @@ obj-$(CONFIG_ATH79_MACH_ONION_OMEGA) += mach-onion-omega.o
obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
+obj-$(CONFIG_ATH79_MACH_C55) += mach-c55.o
obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o
obj-$(CONFIG_ATH79_MACH_R6100) += mach-r6100.o
obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-c55.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-c55.c
new file mode 100644
index 0000000..cbee18e
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-c55.c
@@ -0,0 +1,132 @@
+/*
+ * AirTight Networks C-55 board support
+ *
+ * Copyright (C) 2014-2015 Chris Blake <chrisrblak...@gmail.com>
+ *
+ * Based on Senao CAP4200AG board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juh...@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define C55_GPIO_LED_PWR_GREEN 12
+#define C55_GPIO_LED_PWR_AMBER 13
+#define C55_GPIO_LED_LAN_GREEN 14
+#define C55_GPIO_LED_LAN_AMBER 15
+#define C55_GPIO_LED_WLAN_GREEN 18
+#define C55_GPIO_LED_WLAN_AMBER 19
+
+#define C55_GPIO_BTN_RESET 17
+
+#define C55_KEYS_POLL_INTERVAL 20 /* msecs */
+#define C55_KEYS_DEBOUNCE_INTERVAL (3 * C55_KEYS_POLL_INTERVAL)
+
+#define C55_MAC_OFFSET 0
+#define C55_WMAC_CALDATA_OFFSET 0x1000
+#define C55_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led c55_leds_gpio[] __initdata = {
+ {
+ .name = "c-55:green:pwr",
+ .gpio = C55_GPIO_LED_PWR_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "c-55:amber:pwr",
+ .gpio = C55_GPIO_LED_PWR_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "c-55:green:lan",
+ .gpio = C55_GPIO_LED_LAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "c-55:amber:lan",
+ .gpio = C55_GPIO_LED_LAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "c-55:green:wlan",
+ .gpio = C55_GPIO_LED_WLAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "c-55:amber:wlan",
+ .gpio = C55_GPIO_LED_WLAN_AMBER,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button c55_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = C55_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = C55_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static void __init c55_setup(void)
+{
+ /* SPI Storage*/
+ ath79_register_m25p80_large(NULL);
+
+ /* MDIO Interface */
+ ath79_register_mdio(0, 0x0);
+
+ /* AR8035-A Ethernet */
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+ ath79_init_mac(ath79_eth0_data.mac_addr, NULL, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+ /* LEDs & GPIO */
+ ath79_gpio_output_select(C55_GPIO_LED_LAN_GREEN,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(C55_GPIO_LED_LAN_AMBER,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(c55_leds_gpio),
+ c55_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, C55_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(c55_gpio_keys),
+ c55_gpio_keys);
+
+ /* WiFi */
+ ath79_wmac_disable_2ghz();
+ ath79_register_wmac_simple();
+ ap91_pci_init_simple();
+
+}
+MIPS_MACHINE(ATH79_MACH_C55, "C-55", "AirTight Networks C-55",
+ c55_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index fc3eeaf..48b0962 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -42,6 +42,7 @@ enum ath79_mach_type {
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
ATH79_MACH_BSB, /* Smart Electronics Black Swift board
*/
+ ATH79_MACH_C55, /* AirTight Networks C-55 */
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
diff --git a/target/linux/ar71xx/generic/profiles/airtight.mk
b/target/linux/ar71xx/generic/profiles/airtight.mk
new file mode 100644
index 0000000..00f9ce4
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/airtight.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2015 Chris Blake (chrisrblak...@gmail.com)
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/C-55
+ NAME:=AirTight Networks C-55
+ PACKAGES:=kmod-ath9k
+endef
+
+define Profile/C-55/Description
+ Package set optimized for the AirTight Networks C-55 AP.
+endef
+
+$(eval $(call Profile,C-55))
diff --git a/target/linux/ar71xx/image/Makefile
b/target/linux/ar71xx/image/Makefile
index 10de223..fcf462a 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -2256,6 +2256,16 @@ $(eval $(call BuildTemplate,256k,,256k))
$(eval $(call BuildTemplate,all,,64k 128k 256k))
ifeq ($(SUBTARGET),generic)
+define Device/c-55
+ BOARDNAME = C-55
+ KERNEL_SIZE = 2048k
+ IMAGE_SIZE = 15872k
+ MTDPARTS =
spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware)
+ IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs
| pad-rootfs | check-size $$$$(IMAGE_SIZE)
+endef
+
+TARGET_DEVICES += c-55
+
$(eval $(call
SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2))
$(eval $(call
SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image))
$(eval $(call
SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image))
--
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
