From: Daniel Dickinson <open...@daniel.thecshore.com> Kernel part of support for PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP was a device sold by PowerCloud Systems as hardware for the CloudCommand service for 'cloud' based managment of large numbers access points.
The CAP324 is a dual-band 802.11n wireless access point with 16MB flash and 128MB RAM and single gigabit ethernet port. It can be powered via PoE or a wall wart. --- target/linux/ar71xx/config-4.1 | 1 + target/linux/ar71xx/mikrotik/config-default | 1 + target/linux/ar71xx/nand/config-default | 1 + ...-MIPS-ath79-add-powercloud-cap324-support.patch | 175 +++++++++++++++++++++ 4 files changed, 178 insertions(+) create mode 100644 target/linux/ar71xx/patches-4.1/823-MIPS-ath79-add-powercloud-cap324-support.patch diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1 index eff197a..7a402a4 100644 --- a/target/linux/ar71xx/config-4.1 +++ b/target/linux/ar71xx/config-4.1 @@ -50,6 +50,7 @@ CONFIG_ATH79_MACH_ARDUINO_YUN=y CONFIG_ATH79_MACH_AW_NR580=y CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y CONFIG_ATH79_MACH_BSB=y +CONFIG_ATH79_MACH_CAP324=y CONFIG_ATH79_MACH_CAP4200AG=y CONFIG_ATH79_MACH_CARAMBOLA2=y CONFIG_ATH79_MACH_CF_E316N_V2=y diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index de91e4b..c46529c 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -15,6 +15,7 @@ # CONFIG_ATH79_MACH_ARCHER_C7 is not set # CONFIG_ATH79_MACH_AW_NR580 is not set # CONFIG_ATH79_MACH_BHU_BXU2000N2_A is not set +# CONFIG_ATH79_MACH_CAP324 is not set # CONFIG_ATH79_MACH_CAP4200AG is not set # CONFIG_ATH79_MACH_CARAMBOLA2 is not set # CONFIG_ATH79_MACH_CPE510 is not set diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index 50b6dbe..0407da0 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -13,6 +13,7 @@ # CONFIG_ATH79_MACH_AP96 is not set # CONFIG_ATH79_MACH_ARCHER_C7 is not set # CONFIG_ATH79_MACH_AW_NR580 is not set +# CONFIG_ATH79_MACH_CAP324 is not set # CONFIG_ATH79_MACH_CAP4200AG is not set # CONFIG_ATH79_MACH_CARAMBOLA2 is not set # CONFIG_ATH79_MACH_DB120 is not set diff --git a/target/linux/ar71xx/patches-4.1/823-MIPS-ath79-add-powercloud-cap324-support.patch b/target/linux/ar71xx/patches-4.1/823-MIPS-ath79-add-powercloud-cap324-support.patch new file mode 100644 index 0000000..2653d24 --- /dev/null +++ b/target/linux/ar71xx/patches-4.1/823-MIPS-ath79-add-powercloud-cap324-support.patch @@ -0,0 +1,175 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -866,6 +866,16 @@ config ATH79_MACH_MZK_W300NH + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + ++config ATH79_MACH_CAP324 ++ bool "PowerCloud Systems CAP324 board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_RW2458N + bool "Redwave RW2458N board support" + select SOC_AR724X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -57,6 +57,7 @@ obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += ma + obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o + obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o + obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o ++obj-$(CONFIG_ATH79_MACH_CAP324) += mach-cap324.o + obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o + obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o + obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o +--- /dev/null ++++ b/arch/mips/ath79/mach-cap324.c +@@ -0,0 +1,133 @@ ++/* ++ * PowerCloud Systems CAP324 board support ++ * ++ * Copyright (C) 2012 Gabor Juhos <juh...@openwrt.org> ++ * Copyright (C) 2012-2013 PowerCloud Systems ++ * Copyright (C) 2015 Daniel Dickinson ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/pci.h> ++#include <linux/phy.h> ++#include <linux/platform_device.h> ++#include <linux/ath9k_platform.h> ++ ++#include <asm/mach-ath79/ar71xx_regs.h> ++ ++#include "common.h" ++#include "dev-ap9x-pci.h" ++#include "dev-eth.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" ++#include "dev-m25p80.h" ++#include "dev-spi.h" ++#include "dev-usb.h" ++#include "dev-wmac.h" ++#include "machtypes.h" ++ ++#define CAP324_GPIO_LED_POWER_GREEN 12 ++#define CAP324_GPIO_LED_POWER_AMBER 13 ++#define CAP324_GPIO_LED_LAN_GREEN 14 ++#define CAP324_GPIO_LED_LAN_AMBER 15 ++#define CAP324_GPIO_LED_WLAN_GREEN 18 ++#define CAP324_GPIO_LED_WLAN_AMBER 19 ++ ++#define CAP324_GPIO_BTN_RESET 17 ++ ++#define CAP324_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define CAP324_KEYS_DEBOUNCE_INTERVAL (3 * CAP324_KEYS_POLL_INTERVAL) ++ ++#define CAP324_MAC_OFFSET 0 ++#define CAP324_WMAC_CALDATA_OFFSET 0x1000 ++#define CAP324_PCIE_CALDATA_OFFSET 0x5000 ++ ++static struct gpio_led cap324_leds_gpio[] __initdata = { ++ { ++ .name = "pcs:green:power", ++ .gpio = CAP324_GPIO_LED_POWER_GREEN, ++ .active_low = 1, ++ }, ++ { ++ .name = "pcs:amber:power", ++ .gpio = CAP324_GPIO_LED_POWER_AMBER, ++ .active_low = 1, ++ }, ++ { ++ .name = "pcs:green:lan", ++ .gpio = CAP324_GPIO_LED_LAN_GREEN, ++ .active_low = 1, ++ }, ++ { ++ .name = "pcs:amber:lan", ++ .gpio = CAP324_GPIO_LED_LAN_AMBER, ++ .active_low = 1, ++ }, ++ { ++ .name = "pcs:green:wlan", ++ .gpio = CAP324_GPIO_LED_WLAN_GREEN, ++ .active_low = 1, ++ }, ++ { ++ .name = "pcs:amber:wlan", ++ .gpio = CAP324_GPIO_LED_WLAN_AMBER, ++ .active_low = 1, ++ }, ++}; ++ ++static struct gpio_keys_button cap324_gpio_keys[] __initdata = { ++ { ++ .desc = "Reset button", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = CAP324_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = CAP324_GPIO_BTN_RESET, ++ .active_low = 1, ++ }, ++}; ++ ++static void __init cap324_setup(void) ++{ ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 mac[6]; ++ ++ ath79_gpio_output_select(CAP324_GPIO_LED_LAN_GREEN, ++ AR934X_GPIO_OUT_GPIO); ++ ath79_gpio_output_select(CAP324_GPIO_LED_LAN_AMBER, ++ AR934X_GPIO_OUT_GPIO); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(cap324_leds_gpio), ++ cap324_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, CAP324_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(cap324_gpio_keys), ++ cap324_gpio_keys); ++ ++ ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -1); ++ ath79_wmac_disable_2ghz(); ++ ath79_register_wmac(art + CAP324_WMAC_CALDATA_OFFSET, mac); ++ ++ ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -2); ++ ap91_pci_init(art + CAP324_PCIE_CALDATA_OFFSET, mac); ++ ++ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | ++ AR934X_ETH_CFG_SW_ONLY_MODE); ++ ++ ath79_register_mdio(0, 0x0); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, ++ art + CAP324_MAC_OFFSET, -2); ++ ++ /* GMAC0 is connected to an external PHY */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = BIT(0); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++ ath79_eth0_pll_data.pll_1000 = 0x06000000; ++ ath79_register_eth(0); ++} ++ ++MIPS_MACHINE(ATH79_MACH_CAP324, "CAP324", "PowerCloud CAP324", ++ cap324_setup); +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -40,6 +40,7 @@ enum ath79_mach_type { + ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ + ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */ + ATH79_MACH_BSB, /* Smart Electronics Black Swift board */ ++ ATH79_MACH_CAP324, /* PowerCloud Systems CAP324 */ + ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ + ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ + ATH79_MACH_CPE510, /* TP-LINK CPE510 */ -- 2.4.3 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel