[ 76.724897] NET: Registered protocol family 24 [ 76.795698] PCI: Enabling device 0000:00:01.0 (0000 -> 0002) [ 76.803518] rt2800pci 0000:00:01.0: failed to load eeprom property [ 76.809963] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'rt2x00.eeprom'. [ 76.820564] rt2800pci 0000:00:01.0: Direct firmware load for rt2x00.eeprom failed with error -2 [ 76.829595] rt2800pci 0000:00:01.0: Falling back to user helper [ 83.235050] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected [ 83.243146] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected [ 83.251793] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 89.653747] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 91.132554] eth0: link UP - 100/full - flow control off [ 91.146204] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 102.639205] device eth0.1 entered promiscuous mode [ 102.644225] device eth0 entered promiscuous mode [ 102.684722] br-lan: port 1(eth0.1) entered forwarding state [ 102.690589] br-lan: port 1(eth0.1) entered forwarding state [ 103.732202] eth0: link UP - 100/full - flow control off [ 104.694171] br-lan: port 1(eth0.1) entered forwarding state [ 108.587444] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 109.148045] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34 [ 109.281432] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
I got this log in the firmware from Chaos Calmer 15.05, and it would lead to different machines have the same WIFI MAC. So, how to solve it ? Thank you very much. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
