The PBR-M1 support in current OpenWrt is for the early demo board and it 
doesn't work on the final board.This patch fixes the support for it.
The LED called pbr-m1:buzzer is a beeper connected to GPIO26 so I used 
gpio-beeper instead of gpio-leds.

Changes since V1:
Fix style problems.
Use pbr-m1:blue:power as the status led.

Signed-off-by: 郭传鈜 <gch981...@gmail.com>
---
 target/linux/ramips/base-files/etc/board.d/01_leds |  6 +-
 target/linux/ramips/base-files/etc/diag.sh         |  2 +-
 target/linux/ramips/dts/PBR-M1.dts                 | 67 +++++++++++++++++-----
 3 files changed, 57 insertions(+), 18 deletions(-)

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds 
b/target/linux/ramips/base-files/etc/board.d/01_leds
index 8cb0e48..40a5244 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -200,9 +200,9 @@ oy-0001)
        set_wifi_led "$board:green:wifi"
        ;;
 pbr-m1)
-       ucidef_set_led_netdev "internet" "internet" "$board:green:internet" 
"eth0.2"
-       ucidef_set_led_default "power" "power" "$board:green:power" "1"
-       ucidef_set_led_default "sys" "sys" "$board:green:sys" "1"
+       ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" 
"eth0.2"
+       ucidef_set_led_default "power" "power" "$board:blue:power" "1"
+       ucidef_set_led_default "sys" "sys" "$board:blue:sys" "1"
        ;;
 px-4885)
        set_wifi_led "$board:orange:wifi"
diff --git a/target/linux/ramips/base-files/etc/diag.sh 
b/target/linux/ramips/base-files/etc/diag.sh
index ff5fbf2..e2c25dc 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -83,6 +83,7 @@ get_status_led() {
                ;;
        dap-1350|\
        na930|\
+       pbr-m1|\
        rt-n13u|\
        rt-n14u|\
        rt-n15|\
@@ -135,7 +136,6 @@ get_status_led() {
        sl-r7205)
                status_led="$board:green:wifi"
                ;;
-       pbr-m1|\
        w306r-v20|\
        zbt-wr8305rt)
                status_led="$board:green:sys"
diff --git a/target/linux/ramips/dts/PBR-M1.dts 
b/target/linux/ramips/dts/PBR-M1.dts
index 7702d9c..6f6ac31 100644
--- a/target/linux/ramips/dts/PBR-M1.dts
+++ b/target/linux/ramips/dts/PBR-M1.dts
@@ -17,6 +17,12 @@
 
        sdhci@10130000 {
                status = "okay";
+               pinctrl-names = "default";
+               pinctrl-0 = <&sdhci_pins>;
+       };
+
+       xhci@1E1C0000 {
+               status = "okay";
        };
 
        palmbus@1E000000 {
@@ -81,7 +87,7 @@
                        mt76@0,0 {
                                reg = <0x0000 0 0 0 0>;
                                device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x0000>;
+                               mediatek,mtd-eeprom = <&factory 0x8000>;
                                mediatek,2ghz = <0>;
                        };
                };
@@ -90,7 +96,7 @@
                        mt76@1,0 {
                                reg = <0x0000 0 0 0 0>;
                                device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x8000>;
+                               mediatek,mtd-eeprom = <&factory 0x0000>;
                                mediatek,5ghz = <0>;
                        };
                };
@@ -103,24 +109,29 @@
        gpio-leds {
                compatible = "gpio-leds";
 
-               buzzer {
-                       label = "pbr-m1:buzzer";
-                       gpios = <&gpio0 27 1>;
-               };
-
                power {
-                       label = "pbr-m1:green:power";
-                       gpios = <&gpio0 25 1>;
+                       label = "pbr-m1:blue:power";
+                       gpios = <&gpio0 31 1>;
                };
 
                sys {
-                       label = "pbr-m1:green:sys";
-                       gpios = <&gpio0 24 1>;
+                       label = "pbr-m1:blue:sys";
+                       gpios = <&gpio1 0 1>;
                };
 
                internet {
-                       label = "pbr-m1:green:internet";
-                       gpios = <&gpio0 23 1>;
+                       label = "pbr-m1:blue:internet";
+                       gpios = <&gpio0 29 1>;
+               };
+
+               2g {
+                       label = "pbr-m1:blue:2g";
+                       gpios = <&gpio1 1 1>;
+               };
+
+               5g {
+                       label = "pbr-m1:blue:5g";
+                       gpios = <&gpio0 28 1>;
                };
        };
 
@@ -137,10 +148,38 @@
                };
        };
 
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               power_usb2 {
+                       gpio-export,name = "power_usb2";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 22 0>;
+               };
+
+               power_usb3 {
+                       gpio-export,name = "power_usb3";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 25 0>;
+               };
+
+               power_sata {
+                       gpio-export,name = "power_sata";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 27 0>;
+               };
+       };
+
+       beeper: beeper {
+               compatible = "gpio-beeper";
+               gpios = <&gpio0 26 1>;
+       };
+
        pinctrl {
                state_default: pinctrl0 {
                        gpio {
-                               ralink,group = "wdt", "rgmii2", "wdt rst", 
"jtag", "mdio";
+                               ralink,group = "wdt", "rgmii2", "jtag", "mdio";
                                ralink,function = "gpio";
                        };
                };
-- 
2.5.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to