Is this the one with the promising 802.11ac chipset?
If so, how do I get a few?
If not, how do I get one? :)
On Thu, Dec 3, 2015 at 12:17 PM, John Crispin <blo...@openwrt.org> wrote:
> offtopic ... my 2 samples of this board just arrived :) i know what i
> will be testing later on today
>
> On 03/12/2015 12:13, Felix Fietkau wrote:
>> On 2015-12-03 07:20, Sebastian Careba wrote:
>>> The board is based on mt7621AT cpu, and has 16mb nor flash, 256mb of ram, 2
>>> sata ports, microsd card slot, 1 USB 3.0 port and at least one 2.4 and one
>>> 5 ghz antenna. This is the 4th submission that fixes the naming scheme for
>>> Mqmaker WiTi board.
>>> Patch v1 added initial support for MQmaker WiTi board. The device tree is
>>> based on PBR-M1.
>>> Patch v2 changed the flash chip ID (w25q256 to gd25q128).
>>> Patch v3 fixed the left-out entry for WiTi in 02_network.
>>>
>>> Signed-off-by: Sebastian Careba <nitrosh...@yahoo.com>
>>> ---
>>> .../patches-3.18/999-add_gd25q128_support.patch | 13 ++
>>> .../linux/ramips/base-files/etc/board.d/02_network | 1 +
>>> target/linux/ramips/base-files/etc/diag.sh | 1 +
>>> target/linux/ramips/base-files/lib/ramips.sh | 3 +
>>> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
>>> target/linux/ramips/dts/WITI.dts | 142
>>> +++++++++++++++++++++
>>> target/linux/ramips/image/Makefile | 7 +-
>>> target/linux/ramips/mt7621/profiles/mqmaker.mk | 20 +++
>>> 8 files changed, 187 insertions(+), 1 deletion(-)
>>> create mode 100644
>>> target/linux/generic/patches-3.18/999-add_gd25q128_support.patch
>>> create mode 100644 target/linux/ramips/dts/WITI.dts
>>> create mode 100644 target/linux/ramips/mt7621/profiles/mqmaker.mk
>>>
>>> diff --git
>>> a/target/linux/generic/patches-3.18/999-add_gd25q128_support.patch
>>> b/target/linux/generic/patches-3.18/999-add_gd25q128_support.patch
>>> new file mode 100644
>>> index 0000000..e9c380b
>>> --- /dev/null
>>> +++ b/target/linux/generic/patches-3.18/999-add_gd25q128_support.patch
>>> @@ -0,0 +1,13 @@
>>> Index: linux-3.18.23/drivers/mtd/devices/m25p80.c
>>> ===================================================================
>>> --- linux-3.18.23.orig/drivers/mtd/devices/m25p80.c
>>> +++ linux-3.18.23/drivers/mtd/devices/m25p80.c
>>> @@ -352,7 +352,7 @@ static const struct spi_device_id m25p_i
>>> {"en25q64"}, {"en25qh128"}, {"en25qh256"},
>>> {"f25l32pa"},
>>> {"mr25h256"}, {"mr25h10"},
>>> - {"gd25q32"}, {"gd25q64"},
>>> + {"gd25q32"}, {"gd25q64"}, {"gd25q128"},
>>> {"160s33b"}, {"320s33b"}, {"640s33b"},
>>> {"mx25l2005a"}, {"mx25l4005a"}, {"mx25l8005"}, {"mx25l1606e"},
>>> {"mx25l3205d"}, {"mx25l3255e"}, {"mx25l6405d"}, {"mx25l12805d"},
>> Please drop this patch (see below).
>>
>>> --- /dev/null
>>> +++ b/target/linux/ramips/dts/WITI.dts
>>> @@ -0,0 +1,142 @@
>>> +/dts-v1/;
>>> +
>>> +/include/ "mt7621.dtsi"
>>> +
>>> +/ {
>>> + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
>>> + model = "MQmaker WiTi";
>>> +
>>> + memory@0 {
>>> + device_type = "memory";
>>> + reg = <0x0 0x10000000>;
>>> + };
>>> +
>>> + chosen {
>>> + bootargs = "console=ttyS0,57600";
>>> + };
>>> +
>>> + sdhci@10130000 {
>>> + status = "okay";
>>> + };
>>> +
>>> + palmbus@1E000000 {
>>> + spi@b00 {
>>> + status = "okay";
>>> +
>>> + m25p80@0 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + compatible = "gd25q128";
>> Please use 'jedec,spi-nor' here, so you don't have to patch in the
>> device id for this chip.
>>
>> - Felix
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
