netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.The
following patch adds support for this device.
Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons (reset button)
* ethernet switch and USB diag LEDs
* UART
* GPIOs
Signed-off-by: YounJae Rho <luxf...@live.com>---
target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/etc/diag.sh | 3 +
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/WF-2881.dts | 129 +++++++++++++++++++++
target/linux/ramips/image/Makefile | 6 +-
target/linux/ramips/mt7621/config-3.18 | 7 +-
target/linux/ramips/mt7621/profiles/wf-2881.mk | 18 +++
9 files changed, 168 insertions(+), 3 deletions(-)
create mode 100644 target/linux/ramips/dts/WF-2881.dts
create mode 100644 target/linux/ramips/mt7621/profiles/wf-2881.mk
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index c75a993..7d2b284 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -264,6 +264,9 @@ zbt-wr8305rt)
zte-q7)
set_wifi_led "$board:blue:status"
;;
+wf-2881)
+ set_usb_led "netis:green:usb"
+ ;;
esac
board_config_flush
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index 0732796..543512a 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -83,6 +83,7 @@ ramips_setup_interfaces()
wsr-1166|\
wsr-600|\
wt1520|\
+ wf-2881|\
y1)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
diff --git a/target/linux/ramips/base-files/etc/diag.sh
b/target/linux/ramips/base-files/etc/diag.sh
index 5376759..bf4fec0 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -174,6 +174,9 @@ get_status_led() {
wsr-600)
status_led="$board:orange:diag"
;;
+ wf-2881)
+ status_led="netis:green:wps"
+ ;;
esac
}
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index 340bc4c..0273527 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -277,6 +277,9 @@ ramips_board_detect() {
*"NCS601W")
name="ncs601w"
;;
+ *"NETIS WF-2881")
+ name="wf-2881"
+ ;;
*"NW718")
name="nw718"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index d3d9df3..687642f 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -107,6 +107,7 @@ platform_check_image() {
w150m|\
w306r-v20|\
w502u|\
+ wf-2881|\
whr-1166d|\
whr-300hp2|\
whr-600d|\
diff --git a/target/linux/ramips/dts/WF-2881.dts
b/target/linux/ramips/dts/WF-2881.dts
new file mode 100644
index 0000000..b31aeee
--- /dev/null
+++ b/target/linux/ramips/dts/WF-2881.dts
@@ -0,0 +1,129 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+ compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+ model = "NETIS WF-2881";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ palmbus@1E000000 {
+ spi@b00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+
+ nand@1e003000 {
+ compatible = "mtk,mt7621-nand";
+ bank-width = <2>;
+ reg = <0x1e003000 0x800
+ 0x1e003800 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x1000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "config";
+ reg = <0x80000 0x20000>;
+ read-only;
+ };
+
+ factory: partition@100000 {
+ label = "factory";
+ reg = <0x100000 0x40000>;
+ read-only;
+ };
+
+ partition@140000 {
+ label = "firmware";
+ reg = <0x140000 0x6EC0000>;
+ };
+
+ };
+
+
+ pcie@1e140000 {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+ };
+
+ ethernet@1e100000 {
+ mtd-mac-address = <&factory 0xe006>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "netis:green:usb";
+ gpios = <&gpio0 6 1>;
+ };
+ wps {
+ label = "netis:green:wps";
+ gpios = <&gpio0 0 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 1>;
+ linux,code = <0x198>;
+ };
+
+
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uart3", "jtag";
+ ralink,function = "gpio";
+ };
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile
b/target/linux/ramips/image/Makefile
index c66409d..060a2a4 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -950,7 +950,7 @@ endif
#
ifeq ($(SUBTARGET),mt7621)
- TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500
sap-g3200u3
+ TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500
sap-g3200u3 wf-2881
endif
define Device/mt7621
@@ -1000,6 +1000,10 @@ define Device/sap-g3200u3
DTS := SAP-G3200U3
endef
+define Device/wf-2881
+ DTS := WF-2881
+endef
+
#
# MT7628 Profiles
#
diff --git a/target/linux/ramips/mt7621/config-3.18
b/target/linux/ramips/mt7621/config-3.18
index fb05d1e..8bc2d80 100644
--- a/target/linux/ramips/mt7621/config-3.18
+++ b/target/linux/ramips/mt7621/config-3.18
@@ -36,6 +36,8 @@ CONFIG_CPU_RMAP=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
@@ -117,18 +119,19 @@ CONFIG_MIPS_MT_FPAFF=y
CONFIG_MIPS_MT_SMP=y
CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MTK_MTD_NAND is not set
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MT7621_WDT=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_SPLIT_TRX_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTK_MTD_NAND=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_RALINK=y
diff --git a/target/linux/ramips/mt7621/profiles/wf-2881.mk
b/target/linux/ramips/mt7621/profiles/wf-2881.mk
new file mode 100644
index 0000000..6de40af
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/wf-2881.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/WF-2881
+ NAME:=NETIS WF-2881
+ PACKAGES:=\
+ kmod-usb-core kmod-usb3 kmod-usb-hid \
+ kmod-ledtrig-usbdev
+endef
+
+define Profile/WF-2881/Description
+ Package set compatible with the NETIS WF-2881 board.
+endef
+$(eval $(call Profile,WF-2881))
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
