Signed-off-by: Shonn Lu <countryside...@qq.com>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 5 +
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/Youku-YK1.dts | 127 +++++++++++++++++++++
target/linux/ramips/image/Makefile | 2 +
6 files changed, 139 insertions(+)
create mode 100644 target/linux/ramips/dts/Youku-YK1.dts
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index 545bd70..bc86bd3 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -261,6 +261,11 @@ case $board in
zte-q7)
set_wifi_led "zte:blue:status"
;;
+ yk1)
+ ucidef_set_led_default "power" "power" "youku:blue:power" "1"
+ set_wifi_led "youku:blue:air"
+ set_usb_led "youku:blue:usb"
+ ;;
esac
board_config_flush
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index 19ef3f7..3c87971 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -145,6 +145,7 @@ ramips_setup_interfaces()
wsr-1166 | \
wt1520 | \
xiaomi-miwifi-mini |\
+ yk1 |\
y1)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index a9a6664..bdd6d4e 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -409,6 +409,9 @@ ramips_board_detect() {
*"ZTE Q7")
name="zte-q7"
;;
+ *"Youku YK1")
+ name="yk1"
+ ;;
*"Lenovo Y1")
name="y1"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 11fee85..66fcd04 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -127,6 +127,7 @@ platform_check_image() {
y1 |\
y1s |\
zte-q7 |\
+ yk1 |\
zbt-wa05)
[ "$magic" != "27051956" ] && {
echo "Invalid image type."
diff --git a/target/linux/ramips/dts/Youku-YK1.dts
b/target/linux/ramips/dts/Youku-YK1.dts
new file mode 100644
index 0000000..10662d3
--- /dev/null
+++ b/target/linux/ramips/dts/Youku-YK1.dts
@@ -0,0 +1,127 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "Youku-YK1", "ralink,mt7620a-soc";
+ model = "Youku YK1";
+
+ palmbus@10000000 {
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ gpio1: gpio@638 {
+ status = "okay";
+ };
+
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ gpio3: gpio@688 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q256";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q256";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "rgmii1",
"rgmii2", "ephy", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "llllw";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ sdhci@b0130000 {
+ status = "okay";
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ wan {
+ label = "youku:blue:wan";
+ gpios = <&gpio2 4 1>;
+ };
+ air {
+ label = "youku:blue:air";
+ gpios = <&gpio3 0 1>;
+ };
+ usb {
+ label = "youku:blue:usb";
+ gpios = <&gpio1 11 1>;
+ };
+ power {
+ label = "youku:blue:power";
+ gpios = <&gpio1 5 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile
b/target/linux/ramips/image/Makefile
index b4d0897..ca320d3 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -884,6 +884,7 @@ Image/Build/Profile/WRTNODE=$(call
BuildFirmware/Default16M/$(1),$(1),wrtnode,WR
Image/Build/Profile/WT3020=$(call
BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call
BuildFirmware/Default16M/$(1),$(1),xiaomi-miwifi-mini,XIAOMI-MIWIFI-MINI)
Image/Build/Profile/ZTE-Q7=$(call
BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
+Image/Build/Profile/Youku-YK1=$(call
BuildFirmware/Default32M/$(1),$(1),youku-yk1,Youku-YK1)
Image/Build/Profile/ZBT-WA05=$(call
BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
Image/Build/Profile/ArcherC20i=$(call
BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
microwrt_mtd_size=16515072
@@ -917,6 +918,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WT3020,$(1))
$(call Image/Build/Profile/XIAOMI-MIWIFI-MINI,$(1))
$(call Image/Build/Profile/ZTE-Q7,$(1))
+ $(call Image/Build/Profile/Youku-YK1,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
$(call Image/Build/Profile/ArcherC20i,$(1))
$(call Image/Build/Profile/MicroWRT,$(1))
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
