On Oct 28, 2015 5:56 AM, "Yousong Zhou" <yszhou4t...@gmail.com> wrote: > > This is almost the default config of OpenWrt targets (currently even > those sunxi boards with only one ethernet interface use static IP > address for its lan interface).
And this is intend intended, because Malta is primarily used under qemu, from which you get your network to be NAT'd or bridged from/with the host. Your change would force an user to reconfigure the network on boot, and that seems like a less sensible default to me. > > While at it, also configure a wan interface if eth1 exists. > > Signed-off-by: Yousong Zhou <yszhou4t...@gmail.com> > --- > target/linux/malta/base-files/etc/uci-defaults/02-network | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/target/linux/malta/base-files/etc/uci-defaults/02-network b/target/linux/malta/base-files/etc/uci-defaults/02-network > index e90ecbe..1b22ec5 100644 > --- a/target/linux/malta/base-files/etc/uci-defaults/02-network > +++ b/target/linux/malta/base-files/etc/uci-defaults/02-network > @@ -3,4 +3,7 @@ > . /lib/functions/uci-defaults.sh > > ucidef_set_interface_loopback > -ucidef_set_interface_raw "lan" "eth0" "dhcp" > +ucidef_set_interface_lan "eth0" > +if [ -d "/sys/class/net/eth1" ]; then > + ucidef_set_interface_wan "eth1" > +fi > -- > 1.7.10.4
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
