Quick summary: Subtargets - used for building modified kernels Profiles - used for including specific software
There are two ways of using profiles: 1) Changing some software for all devices Used when profile is used for all devices (no filtering, no per device profiles). This is used e.g. by brcm47xx. Normally all images will be built with b43. However by changing a profile you can get *all* images to include wl.ko. 2) Including extra software for specific devices Used when profile is (group) device specific. E.g. including USB drivers for devices with USB only. This is something I'd like to use with bcm53xx. I'd like to include brcmfmac.ko in two images only (R8000 and SR400ac). Of course, I'll need to adjust target/bcm53xx/image/Makefile to: a) Stop building SR400ac and R8000 images for TARGET_bcm53xx_Generic b) Build above images for something new like TARGET_bcm53xx_brcmfmac If I add TARGET_bcm53xx_brcmfmac as explained above, its images won't be build anymore by default. I'd like to to have a way to ask "make" for building all profiles by setting some variable in target/bcm53xx/Makefile Can someone give me some help with implementing this? -- Rafał _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
