-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
This has many cases where you have added the board out of order. The
lists are generally alphabetically sorted, and should be maintained
that
way, even though a few boards escaped this.
More comments inline.
Stijn Segers <francesco.borrom...@inventati.org> wrote:
Hello,
The patch below adds support for the Gainstrong Minibox v1.0 mini
router into trunk. This is based off the Barrier Breaker based
source
code at http://ooioe.com/miniboxv1/Sourcecode/.
Patch applies cleanly, has been compile-tested on a 15.05 tree (the
patch below is for the trunk ar17xx target with kernel 4.1). For
those
interested, I can provide the 15.05 patch as well.
Any questions, let me know.
Thank you
Stijn
Index: openwrt/trunk/target/linux/ar71xx/base-files/etc/diag.sh
===================================================================
--- openwrt.orig/trunk/target/linux/ar71xx/base-files/etc/diag.sh
+++ openwrt/trunk/target/linux/ar71xx/base-files/etc/diag.sh
@@ -222,6 +222,9 @@ get_status_led() {
qihoo-c301)
status_led="qihoo:green:status"
;;
+ minibox-v1)
+ status_led="minibox-v1:green:system"
+ ;;
tew-632brp)
status_led="tew-632brp:green:status"
;;
@@ -366,7 +369,7 @@ set_state() {
status_led_blink_preinit_regular
;;
done)
- status_led_on
+ status_led_off
Pretty sure you can't just change this for everyone. If you have an
active low/active high issue, you should fix that in your board file.
case $(ar71xx_board_name) in
qihoo-c301)
local n=$(fw_printenv activeregion | cut -d = -f 2)
Index:
openwrt/trunk/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
===================================================================
---
openwrt.orig/trunk/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++
openwrt/trunk/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -419,6 +419,7 @@ ja76pf |\
mc-mac1200r|\
mynet-n600 |\
oolite |\
+minibox-v1 |\
I know gainstrong makes the oolite too, but at this point in this
file,
that's irrelevant, keep the alphabetical sorting.
qihoo-c301 |\
rb-750 |\
rb-751 |\
Index: openwrt/trunk/target/linux/ar71xx/base-files/lib/ar71xx.sh
===================================================================
--- openwrt.orig/trunk/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ openwrt/trunk/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -119,6 +119,9 @@ tplink_board_detect() {
"3C0001"*)
model="OOLITE"
;;
+ "3C0002"*)
+ model="MINIBOX_V1"
+ ;;
"070300"*)
model="TP-Link TL-WR703N"
;;
@@ -320,6 +323,9 @@ ar71xx_board_detect() {
*"AC1750DB")
name="f9k1115v2"
;;
+ *"MiniBox V1.0")
+ name="minibox-v1"
+ ;;
Bad sort.
*"AirGateway")
name="airgateway"
;;
Index:
openwrt/trunk/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
===================================================================
---
openwrt.orig/trunk/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++
openwrt/trunk/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -315,6 +315,7 @@ platform_check_image() {
mc-mac1200r | \
onion-omega | \
oolite | \
+ minibox-v1 |\
Bad sort.
smart-300 | \
tl-mr10u | \
tl-mr11u | \
Index: openwrt/trunk/target/linux/ar71xx/config-4.1
===================================================================
--- openwrt.orig/trunk/target/linux/ar71xx/config-4.1
+++ openwrt/trunk/target/linux/ar71xx/config-4.1
@@ -73,6 +73,7 @@ CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_F9K1115V2=y
CONFIG_ATH79_MACH_GL_INET=y
CONFIG_ATH79_MACH_GS_OOLITE=y
+CONFIG_ATH79_MACH_MINIBOX_V1=y
very bad sort. config files have even strong sorting requirements.
CONFIG_ATH79_MACH_HIWIFI_HC6361=y
CONFIG_ATH79_MACH_HORNET_UB=y
CONFIG_ATH79_MACH_JA76PF=y
Index:
openwrt/trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-minibox-v1.c
===================================================================
--- /dev/null
+++
openwrt/trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-minibox-v1.c
@@ -0,0 +1,85 @@
+/*
+ * Oolite board support
Wrong. Oolite is the board you copied. This file should be
accurately
describe what it does, not what it used to do at some point.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
modify it
+ * under the terms of the GNU General Public License version 2 as
published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "dev-usb.h"
It's a matter of taste, but you didn't think of putting all the dev-
includes together?
+
+#define MINIBOX_V1_GPIO_BTN_RESET 11
+
+#define MINIBOX_V1_GPIO_LED_SYSTEM 1
+
+#define MINIBOX_V1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MINIBOX_V1_KEYS_DEBOUNCE_INTERVAL (3 *
MINIBOX_V1_KEYS_POLL_INTERVAL)
+
+static const char *MINIBOX_V1_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data MINIBOX_V1_flash_data = {
+ .part_probes = MINIBOX_V1_part_probes,
+};
+
+static struct gpio_led MINIBOX_V1_leds_gpio[] __initdata = {
+ {
+ .name = "minibox-v1:green:system",
+ .gpio = MINIBOX_V1_GPIO_LED_SYSTEM,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button MINIBOX_V1_gpio_keys[] __initdata =
{
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MINIBOX_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MINIBOX_V1_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+};
+
+static void __init MINIBOX_V1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(MINIBOX_V1_leds_gpio),
+ MINIBOX_V1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, MINIBOX_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(MINIBOX_V1_gpio_keys),
+ MINIBOX_V1_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(&MINIBOX_V1_flash_data);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_MINIBOX_V1, "MINIBOX-V1",
+ "MiniBox V1.0", MINIBOX_V1_setup);
Index:
openwrt/trunk/target/linux/ar71xx/generic/profiles/minibox-v1.mk
===================================================================
--- /dev/null
+++ openwrt/trunk/target/linux/ar71xx/generic/profiles/minibox-v1.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public
License
v2.
+# See /LICENSE for more information.
+#
+
+define Profile/MINIBOXV1
+ NAME:=MINIBOX V1.0
+ PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
+endef
+
+
+define Profile/MINIBOXV1/Description
+ Package set optimized for the MINIBOX V1.0
+endef
+$(eval $(call Profile,MINIBOXV1))
Index: openwrt/trunk/target/linux/ar71xx/image/Makefile
===================================================================
--- openwrt.orig/trunk/target/linux/ar71xx/image/Makefile
+++ openwrt/trunk/target/linux/ar71xx/image/Makefile
@@ -902,6 +902,15 @@ endef
TARGET_DEVICES += ubnt-uap-pro ubnt-unifi-outdoor-plus
+define Device/minibox-v1
+ $(Device/tplink-16mlzma)
+ BOARDNAME := MINIBOX-V1
+ DEVICE_PROFILE := MINIBOXV1
+ TPLINK_HWID := 0x3C000201
+ CONSOLE := ttyATH0,115200
+endef
+TARGET_DEVICES += minibox-v1
+
rootfs_type=$(patsubst jffs2-%,jffs2,$(patsubst
squashfs-%,squashfs,$(1)))
# $(1): rootfs type.
Index:
openwrt/trunk/target/linux/ar71xx/patches-4.1/799-MIPS-ath79-add-minibox-v1-support.patch
===================================================================
--- /dev/null
+++
openwrt/trunk/target/linux/ar71xx/patches-4.1/799-MIPS-ath79-add-minibox-v1-support.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -61,6 +61,7 @@ enum ath79_mach_type {
+ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
+ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
+ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
++ ATH79_MACH_MINIBOX_V1, /* MINIBOX V1.0 */
+ ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */
+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -446,6 +446,16 @@ config ATH79_MACH_GS_OOLITE
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_MINIBOX_V1
++ bool "OOLITE BOX V1.0 support"
wrong board name again.
++ select SOC_AR933X
++ select ARH79_DEV_ETH
++ select ARH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_HIWIFI_HC6361
+ bool "HiWiFi HC6361 board support"
+ select SOC_AR933X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -72,6 +72,7 @@ obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += m
+ obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
+ obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
+ obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
++obj-$(CONFIG_ATH79_MACH_MINIBOX_V1) += mach-minibox-v1.o
+ obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o
+ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
+ obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
- --
Sent using Mailpile, Free Software from www.mailpile.is
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=saX1
-----END PGP SIGNATURE-----
