Yes, i can copy the config and build with this configuration,
for example now i have connected to some router, another time we can connect to any router. So how i can fix the settings by default. On Tue, Aug 11, 2015 at 12:45 AM, David Lang <da...@lang.hm> wrote: > On Mon, 10 Aug 2015, John kerry wrote: > > I followed the same steps and its working too. But this i want in wireless >> config file, Because i dont want every time to add using GUI. So When i >> connect to another router also, no need to add one more. I mean to say it >> should be in default wireless config file. >> > > what do you mean by "default wireless config file" > > Once you have set it from the GUI, it is in the config files. The next > time you boot it will use that config. > > If you mean that you want it in the factory default config (for when you > first flash the router or do a factory reset), then take the > /etc/config/wireless and /etc/config/network files and add them to your > build under /files > > David Lang > > > On Mon, Aug 10, 2015 at 6:18 PM, David Lang <da...@lang.hm> wrote: >> >> On Mon, 10 Aug 2015, John kerry wrote: >>> >>> Date: Mon, 10 Aug 2015 18:10:14 +0800 >>> >>>> From: John kerry <kerry9...@gmail.com> >>>> To: Alex Weedy <weedy2...@gmail.com>, >>>> OpenWrt Development List <openwrt-devel@lists.openwrt.org> >>>> Subject: [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple >>>> Wi-Fi >>>> client/AP interfaces on one radio) >>>> >>>> Firstly i configure wireless config as below: >>>> >>>> config wifi-device 'wifi0' >>>> option type 'qcawifi' >>>> option macaddr '00:01:11:00:01:00' >>>> option hwmode '11ng' >>>> option txpower '17' >>>> option htmode 'HT20' >>>> option disabled '0' >>>> option channel '1' >>>> >>>> config wifi-iface >>>> option device 'wifi0' >>>> option mode 'ap' >>>> option ssid 'Testing_ap' >>>> option network 'lan' >>>> option encryption 'psk2' >>>> option key 'Testing_ap' >>>> >>>> so its SSID was showing and able to connect any device to it. >>>> >>>> Then i scan the device and connect to one of it. While joining the >>>> network >>>> i selected Client(WDS) then the wireless config becomes like below: >>>> >>>> >>> why don't you try following the steps in the video that you posted. >>> >>> first connect as a client, then add an additional interface and make the >>> second interface the AP for things to connect to. >>> >>> the order may make a difference. >>> >>> David Lang >>> >>> >>> config wifi-device 'wifi0' >>> >>>> option type 'qcawifi' >>>> option macaddr '00:01:11:00:01:00' >>>> option hwmode '11ng' >>>> option txpower '17' >>>> option htmode 'HT20' >>>> option disabled '0' >>>> option channel '1' >>>> >>>> config wifi-iface >>>> option network 'wwan' >>>> option ssid 'D_Link_Router' >>>> option encryption 'psk2' >>>> option device 'wifi0' >>>> option mode 'sta' >>>> option key 'Dlink_Router' >>>> option wds '1' >>>> >>>> Then i added one as shown in the video. Now its connected to router >>>> also >>>> and this add one also showing so i can connect to this also. >>>> >>>> But i am not getting how to keep this in default wireless config. >>>> >>>> Because every time we cant add one to configure like this. It should be >>>> like default should be in ap mode so any device we can connect, if its >>>> connected to another router also that SSID still should be visible and >>>> able >>>> to connect to this. >>>> >>>> >>> >>> >>> On Mon, Aug 10, 2015 at 2:57 PM, John kerry <kerry9...@gmail.com> wrote: >>>> >>>> When i try to configure based on video, its shows 2 one as client >>>> another >>>> >>>>> one as Master but i am not able to enable it . I mean to say wireless >>>>> becomes disable. If i enable it using GUI also its not happening. >>>>> >>>>> On Mon, Aug 10, 2015 at 2:55 PM, David Lang <da...@lang.hm> wrote: >>>>> >>>>> What happens when you try to follow the video? >>>>> >>>>>> >>>>>> Based on your comments, i'm guessing that things don't work when you >>>>>> try >>>>>> and configure the second network and have it with a different SSID >>>>>> than >>>>>> the >>>>>> first network that you put in client mode. >>>>>> >>>>>> Is this correct? >>>>>> >>>>>> David Lang >>>>>> >>>>>> On Mon, 10 Aug 2015, John kerry wrote: >>>>>> >>>>>> Yes, When i am connecting to Another router its changed to Client >>>>>> mode. >>>>>> >>>>>> >>>>>>> Can i configure this in repeater mode like its shows in below link: >>>>>>> >>>>>>> https://www.youtube.com/watch?v=3rbsh2zxPnk >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> _______________________________________________ >>> openwrt-devel mailing list >>> openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>> >>> >>> >>
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
