This patch add support for Planex DB-WRT01. DANBOARD route on
the MT7620A SoC with two Ethernet port and a 802.11n 2.4 GHz radio.
DANBOARD is Cartoon character.
Signed-off-by: YuheiOKAWA <tochiro.srch...@gmail.com>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/etc/diag.sh | 3 +
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/DB-WRT01.dts | 99 ++++++++++++++++++++++
target/linux/ramips/image/Makefile | 2 +
7 files changed, 112 insertions(+)
create mode 100644 target/linux/ramips/dts/DB-WRT01.dts
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index c6bfd7e..2d4fb92 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -85,6 +85,9 @@ case $board in
ucidef_set_led_default "power" "POWER" "d105:red:power" "1"
set_usb_led "d105:green:usb"
;;
+ db-wrt01)
+ ucidef_set_led_default "power" "power" "dbwrt01:orange:power"
"1"
+ ;;
dcs-930l-b1)
ucidef_set_led_default "power" "POWER" "d-link:red:power" "1"
ucidef_set_led_netdev "wifi" "WiFi" "d-link:blue:wps"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index da1854a..083081e 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -126,6 +126,7 @@ ramips_setup_interfaces()
3g-6200n | \
ai-br100 | \
+ db-wrt01 | \
dir-610-a1 | \
dir-300-b7 | \
dir-320-b1 | \
diff --git a/target/linux/ramips/base-files/etc/diag.sh
b/target/linux/ramips/base-files/etc/diag.sh
index e63f0df..8e1bc92 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -48,6 +48,9 @@ get_status_led() {
d105)
status_led="d105:red:power"
;;
+ db-wrt01)
+ status_led="dbwrt01:orange:power"
+ ;;
dcs-930 | dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 |
dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1| dir-300-b7| dir-320-b1)
status_led="d-link:green:status"
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index 7db6d37..e745db9 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -211,6 +211,9 @@ ramips_board_detect() {
*"Linksys RE6500")
name="re6500"
;;
+ *"Planex DB-WRT01")
+ name="db-wrt01"
+ ;;
*"Planex MZK-750DHP")
name="mzk-750dhp"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 8221997..d09fc80 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -36,6 +36,7 @@ platform_check_image() {
cf-wr800n | \
d105 | \
dap-1350 | \
+ db-wrt01 | \
dcs-930 | \
dcs-930l-b1 | \
dir-300-b1 | \
diff --git a/target/linux/ramips/dts/DB-WRT01.dts
b/target/linux/ramips/dts/DB-WRT01.dts
new file mode 100644
index 0000000..c396cab
--- /dev/null
+++ b/target/linux/ramips/dts/DB-WRT01.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+ model = "Planex DB-WRT01";
+
+ palmbus@10000000 {
+ gpio1: gpio@638 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "en25q64";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi refclk", "rgmii1";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "llllw";
+ };
+
+ gsw@10110000 {
+ ralink,port4 = "ephy";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pcie@10140000 {
+ status = "okay";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power {
+ label = "dbwrt01:orange:power";
+ gpios = <&gpio1 1 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ s1 {
+ label = "wps";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x211>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile
b/target/linux/ramips/image/Makefile
index 409ff26..088cf5a 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -857,6 +857,7 @@ Image/Build/Profile/MT7620a_MT7530=$(call
BuildFirmware/Default8M/$(1),$(1),mt76
Image/Build/Profile/MT7620a_V22SG=$(call
BuildFirmware/Default8M/$(1),$(1),mt7620a_v22sg,MT7620a_V22SG)
br100_mtd_size=8126464
Image/Build/Profile/AIBR100=$(call
BuildFirmware/CustomFlash/$(1),$(1),ai-br100,AIBR100,$(br100_mtd_size),Ai-BR)
+Image/Build/Profile/DB-WRT01=$(call
BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01)
Image/Build/Profile/RP-N53=$(call
BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53)
whr_300hp2_mtd_size=7012352
Image/Build/Profile/WHR300HP2=$(call
BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
@@ -895,6 +896,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/MT7620a_MT7530,$(1))
$(call Image/Build/Profile/MT7620a_V22SG,$(1))
$(call Image/Build/Profile/AIBR100,$(1))
+ $(call Image/Build/Profile/DB-WRT01,$(1))
$(call Image/Build/Profile/CF-WR800N,$(1))
$(call Image/Build/Profile/RP-N53,$(1))
$(call Image/Build/Profile/DIR-810L,$(1))
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
