Hi, On Tue, Jul 28, 2015 at 6:28 AM, Matt Goring <matt.gor...@googlemail.com> wrote: > BCM6318: add support for Plusnet / Sagem 2704N (V1) > Signed-off-by: Matt Goring <matt.gor...@googlemail.com> > ---
For future submissions, add a changelog here for all the changes between (re-)submissions. > target/linux/brcm63xx/base-files/etc/diag.sh | 3 + > .../brcm63xx/base-files/etc/uci-defaults/01_leds | 3 + > .../base-files/etc/uci-defaults/02_network | 1 + > target/linux/brcm63xx/base-files/lib/brcm63xx.sh | 3 + > target/linux/brcm63xx/dts/fast2704n.dts | 84 > ++++++++++++++++++++ > target/linux/brcm63xx/image/Makefile | 2 + > .../patches-3.18/571-board_fast2704n.patch | 65 +++++++++++++++ > .../brcm63xx/patches-4.1/571-board_fast2704n.patch | 65 +++++++++++++++ > target/linux/brcm63xx/profiles/sagem.mk | 10 +++ > 9 files changed, 236 insertions(+) > create mode 100644 target/linux/brcm63xx/dts/fast2704n.dts > create mode 100644 > target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch > create mode 100644 > target/linux/brcm63xx/patches-4.1/571-board_fast2704n.patch > > --- a/target/linux/brcm63xx/image/Makefile > +++ b/target/linux/brcm63xx/image/Makefile > @@ -623,6 +623,8 @@ $(eval $(call > bcm63xxCfe,FAST2404,F@ST2404,fast2404,F@ST2404,6348)) > $(eval $(call bcm63xxCfe,FAST2504n,F@ST2504n,fast2504n,F@ST2504n,6362)) > # Sagem F@ST2604 > $(eval $(call bcm63xxCfe,FAST2604,F@ST2604,fast2604,F@ST2604,6348)) > +# Sagem F@ST2704N V1 / Plusnet F@ST2704N V1 > +$(eval $(call bcm63xxCfe,FAST2704N,FAST2704N,fast2704n,F@ST2704N,6318,--pad > 4)) I thought using F@ST2704N as the board name in the image does not work? Rest looks fine. Jonas _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
