This package contains the WiFi NVRAM distributed with Bananian [1]. It's currently needed to use the WiFi module (BCM43362 SDIO) on the BananaPro with the brcmfmac cfg80211 driver which doesn't yet support retrieving calibration data via device-tree or platform_data.
(DOS-style newlines in nvram_ap6210.txt are supposedly intentional) [1]: http://dl.bananian.org/releases/bananian-latest.zip Signed-off-by: Daniel Golle <dan...@makrotopia.org> --- package/firmware/ap6210-firmware/Makefile | 40 +++++++++++++++ .../ap6210-firmware/files/nvram_ap6210.txt | 57 ++++++++++++++++++++++ 2 files changed, 97 insertions(+) create mode 100644 package/firmware/ap6210-firmware/Makefile create mode 100644 package/firmware/ap6210-firmware/files/nvram_ap6210.txt diff --git a/package/firmware/ap6210-firmware/Makefile b/package/firmware/ap6210-firmware/Makefile new file mode 100644 index 0000000..eccb6fa --- /dev/null +++ b/package/firmware/ap6210-firmware/Makefile @@ -0,0 +1,40 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk + +PKG_NAME:=ap6210-firmware +PKG_VERSION:=1.2-20130319 +PKG_RELEASE:=1 + +include $(INCLUDE_DIR)/package.mk + +define Package/ap6210-firmware + SECTION:=firmware + CATEGORY:=Firmware + TITLE:=NVRAM for the Broadcom AP6210 SDIO platform + DEPENDS:=+brcmfmac-firmware +endef + +define Package/ap6210-firmware/description + This package contains the WiFi NVRAM distributed with Bananian. + It's currently needed to use the WiFi module (BCM43362 SDIO) on the + BananaPro with the brcmfmac cfg80211 driver. +endef + +define Build/Prepare +endef + +define Build/Compile +endef + +define Package/ap6210-firmware/install + $(INSTALL_DIR) $(1)/lib/firmware/brcm + $(INSTALL_BIN) ./files/nvram_ap6210.txt $(1)/lib/firmware/brcm/brcmfmac43362-sdio.txt +endef + +$(eval $(call BuildPackage,ap6210-firmware)) diff --git a/package/firmware/ap6210-firmware/files/nvram_ap6210.txt b/package/firmware/ap6210-firmware/files/nvram_ap6210.txt new file mode 100644 index 0000000..4aa4287 --- /dev/null +++ b/package/firmware/ap6210-firmware/files/nvram_ap6210.txt @@ -0,0 +1,57 @@ +#AP6210_NVRAM_V1.2_03192013 +manfid=0x2d0 +prodid=0x492 +vendid=0x14e4 +devid=0x4343 +boardtype=0x0598 + +# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same +#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305 +boardrev=0x1307 +boardnum=777 +xtalfreq=26000 +boardflags=0x80201 +boardflags2=0x80 +sromrev=3 +wl0id=0x431b +macaddr=00:90:4c:07:71:12 +aa2g=1 +ag0=2 +maxp2ga0=74 +cck2gpo=0x2222 +ofdm2gpo=0x44444444 +mcs2gpo0=0x6666 +mcs2gpo1=0x6666 +pa0maxpwr=56 + +#P207 PA params +#pa0b0=5447 +#pa0b1=-658 +#pa0b2=-175<div></div> + +#Same PA params for P304,P305, P306, P307 + +pa0b0=5447 +pa0b1=-607 +pa0b2=-160 +pa0itssit=62 +pa1itssit=62 + + +cckPwrOffset=5 +ccode=0 +rssismf2g=0xa +rssismc2g=0x3 +rssisav2g=0x7 +triso2g=0 +noise_cal_enable_2g=0 +noise_cal_po_2g=0 +swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff +temp_add=29767 +temp_mult=425 + +btc_flags=0x6 +btc_params0=5000 +btc_params1=1000 +btc_params6=63 + -- 2.4.6 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
