Hi,
I would like to change the default values of Uboot when I choose 2 in the menu.
In the below example, I would like to change <1>, <2> and <3> by
defaults values that I would have set earlier.
Example:
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
7: Load Boot Loader code then write to Flash via Serial.
9: Load Boot Loader code then write to Flash via TFTP.
You choosed 2
2: System Load Linux Kernel then write to Flash via TFTP.
Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
Please Input new ones /or Ctrl-C to discard
Input device IP (10.10.10.123) ==: <1>
Input server IP (10.10.10.3) ==: <2>
Input Linux Kernel filename () ==:<3>
Cheers,
--
Baptiste
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
